Vraag


Acties:
  • 0 Henk 'm!

  • Zucht123
  • Registratie: Maart 2018
  • Laatst online: 25-02-2024
Mijn Intel NUC i3 daar ben ik het passwd voor vergeten van het BIOS wachtwoord, ik weet het dom (ouderdom), hoe kan ik dit weer resetten?

Ik heb wat handleidingen gevolgd zoals pin-reset van 1-2, naar 2-3. Maar dat lijkt niet te helpen.
Na drie foutive wachtwoordpoging krijg ik een "FATAL ERROR halt".

Iemand advies?

Beste antwoord (via Zucht123 op 10-02-2020 15:06)


  • Cyberonline
  • Registratie: Oktober 2017
  • Laatst online: 06-04 20:55
Ik neem aan dat je onderstaande al heb gelezen?:
https://www.intel.com/con.../000007242/intel-nuc.html
  1. Find and remove onboard configuration jumper.
  2. Plug in the computer to a power source and power on the computer.
  3. The computer displays the Config Menu.
  4. Select [2] Clear BIOS User and Supervisor Passwords.
  5. Power off the computer and disconnect it from the power source.
  6. Place the configuration jumper back to its original position.
  7. Replace the cover.
  8. Plug in the computer to the power source and power on the computer.

[ Voor 66% gewijzigd door Cyberonline op 06-02-2020 11:47 ]

Alle reacties


Acties:
  • Beste antwoord
  • 0 Henk 'm!

  • Cyberonline
  • Registratie: Oktober 2017
  • Laatst online: 06-04 20:55
Ik neem aan dat je onderstaande al heb gelezen?:
https://www.intel.com/con.../000007242/intel-nuc.html
  1. Find and remove onboard configuration jumper.
  2. Plug in the computer to a power source and power on the computer.
  3. The computer displays the Config Menu.
  4. Select [2] Clear BIOS User and Supervisor Passwords.
  5. Power off the computer and disconnect it from the power source.
  6. Place the configuration jumper back to its original position.
  7. Replace the cover.
  8. Plug in the computer to the power source and power on the computer.

[ Voor 66% gewijzigd door Cyberonline op 06-02-2020 11:47 ]


Acties:
  • 0 Henk 'm!

  • Zucht123
  • Registratie: Maart 2018
  • Laatst online: 25-02-2024
Cyberonline schreef op donderdag 6 februari 2020 @ 11:47:
Ik neem aan dat je onderstaande al heb gelezen?:
https://www.intel.com/con.../000007242/intel-nuc.html
  1. Find and remove onboard configuration jumper.
  2. Plug in the computer to a power source and power on the computer.
  3. The computer displays the Config Menu.
  4. Select [2] Clear BIOS User and Supervisor Passwords.
  5. Power off the computer and disconnect it from the power source.
  6. Place the configuration jumper back to its original position.
  7. Replace the cover.
  8. Plug in the computer to the power source and power on the computer.
Ik heb hem maar zo verkocht en een nieuwe besteld.

Acties:
  • +1 Henk 'm!

  • Calamor
  • Registratie: Oktober 2004
  • Laatst online: 13:34
Had dit ook gevonden, maar dat werkte niet bij mijn nuc d34010wyk.
Heb een tijd lopen zoeken, maar dacht misschien als ik de jumper er helemaal uit haal. Eens kijken wat er dan gebeurt.
Gelukkig was dat bij mij de oplossing. Als je de jumper op pin 2-3 zet wordt die in lockdown gezet.En kom je helemaal niet in de bios.

[ Voor 6% gewijzigd door Calamor op 01-11-2021 16:53 ]


Acties:
  • 0 Henk 'm!

  • Hero of Time
  • Registratie: Oktober 2004
  • Laatst online: 22:09

Hero of Time

Moderator LNX

There is only one Legend

Deze vraag heeft natuurlijk niets met een besturingssysteem te maken, maar alles met het moederbord/BIOS/UEFI van je Nuc. Ik verhuis dit topic om het iig op de juiste plaats te kunnen rusten.
NOS -> PMG.

[ Voor 3% gewijzigd door Hero of Time op 02-11-2021 20:13 ]

Commandline FTW | Tweakt met mate