Klok loopt steeds 5 minuten voor

[Verwijderd]

Mijn systeemklok loopt elke dag zo'n 5 minuten voor. Ook al zet je de klok goed, toch is het elke dag weer mis.

Wie kan mij helpen?

[RealCato]

StatBar downloaden en hem laten synchroniseren met atoomklok

[Verwijderd]

of D4Time van www.thinkman.com
Kan je ook je tijd op bepaalde intervallen laten synchroniseren. Heel klein en heel effectief programma.

edit:
typo

[Verwijderd]

Zit je toch niet op een netwerk, waarbij tijdens het aanmelden jouw klok gesynchroniseerd wordt met een server ?

[xiphoid]

Ik heb een script geschreven, voor mIRC 5.91
gooi hieronder in een sync.mrc file en zet deze in je mirc/ installed dir. Om hem vervolgens te laden door: /load -rs sync.mrc
Het commando: /sync is nu toegevoegd en deze geeft ook kort overzicht van de mogelijkheden.

code:

;
; Sync section
;

;=====================
; sync by floris & rno
; idea by cabber
; for mIRC 5.91 only
; [[e-mail]]
; [[e-mail]]
; [[e-mail]]
;=====================

; check for mirc 5.91 and display credits
; check for use of NT, if so, unload
on 1:load: {
  unset %sync.script.version
  set %sync.script.version 1.41
  if ($version < 5.91) {
    echo -a  ____________________________________________________________
    echo -a | ERROR!! /sync can't be loaded in versions of mirc < 5.91
    echo -a | Unloading sync stuff. .. Sorry ..
    echo -a  ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
    unset %sync.script.version
    unload -rs $script
    halt
  }
  ; check for running windows nt, if so, halt 
  if ($os == NT) {
    echo -a  ____________________________________________________________
    echo 4 -a | WARNING!! /sync attempts to set the system date/time
    echo 4 -a | On Windows NT you may not have permission to do this
    echo -a  ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
  }
  echo -a  ________________________________________________
  echo -a | /sync
  echo -a | author, floris/rno/cabber - version, %sync.script.version
  echo -a | Syntax: /sync help for more details
  echo -a | mail, [e-mail]
  echo -a  ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
}
; end

; new mIRC command - /sync
alias sync {
  ; check if the command entered was /sync server
  if ($1 == server) {
    ; check if the command entered was just /sync server, if so, display /syn server help
    if ($2 == $null) {
    echo -a  ________________________________________________
    echo -a | Error
    echo -a | Syntax: /sync server <ip address> (nummeric)
    echo -a | Example: /sync server 194.109.6.65 (default)
    echo -a  ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
    halt
    }
    ; check if the value entered for /sync server was a valid ip address, if not, display error/help
    if ($isnumip($2) == $false) {
    echo -a  ________________________________________________
    echo -a | Error
    echo -a | Only numeric ip addresses are allowed to be used
    echo -a | and range from 0.0.0.0 >< 255.255.255.255
    echo -a | Example: /sync server 194.109.6.65 (default)
    echo -a  ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
    halt
    }
    ; check if the value entered for /sync server was a valid ip address, if so, set new server ip for future use
    if ($isnumip($2) == $true) {
    echo -a  ________________________________________________
    echo -a | sync
    echo -a | $chr(91) $+ OK $+ $chr(93) New time server ip set to: $2
    echo -a  ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
    set %sync.server $2
    halt
    }
    halt
  }
  ; check if the command entered was /sync port
  if ($1 == port) {
    ; check if the value for /sync port is numeric, if not, display error/help
    if ($2 !isnum) {
    echo -a  ________________________________________________
    echo -a | Error
    echo -a | Syntax: /sync port <port number> (numeric)
    echo -a | Example: /sync port 13 (default)
    echo -a  ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
    halt
    }
    ; check if the value for /sync port is numeric, if so, set new port for future use
    if ($2 isnum) {
    echo -a  ________________________________________________
    echo -a | sync
    echo -a | $chr(91) $+ OK $+ $chr(93) New port number set to: $2
    echo -a  ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
    set %sync.port $2
    halt
    }
  }
  ; check if the command entered was /sync default, if so, set the default settings for the server and port
  if ($1 == default) {
    echo -a  ________________________________________________
    echo -a | Default
    echo -a | - server [set to default] (194.109.6.65)
    echo -a | - port [set to default] (13)
    echo -a  ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
    set %sync.server 194.109.6.65
    set %sync.port 13
    halt
  }
  ; check if the command entered was /sync credits, if so, display the credits.
  if ($1 == credits) {
    echo -a  ________________________________________________
    echo -a | Credits Sync.mrc v. %sync.script.version
    echo -a | - floris [[e-mail]] (it is a dirty job, but somebody had to bloody do it)
    echo -a | - rno [[e-mail]] (without rno it would be .. well, not working)
    echo -a | - cabber [[e-mail]] (the man with the plan)
    echo -a  ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
    halt
  }
  ; check if the command entered was /sync help, if so, goto help.section and display
  if ($1 == help) {
    goto help
  }
  ; check if the command entered was /sync time, if so, continue
  if ($1 == time) {
    set %sync.is.time on
    ; check if there is a value set for the server, if not, set default server
    if (%sync.server == $null) {
    set %sync.server 194.109.6.65
    }
    ; check if there is a value set for the port, if not, set default port
    if (%sync.port == $null) {
    set %sync.port 13
    }
    ; we have a server and port, the command was /sync time, so open a socket and do ya thing
    sockopen at %sync.server %sync.port
    set %sync.show off
    ; i assume we do not want to continue, so here is a good point to halt,
    ; the rest of the script are events, so they will start up the proggy again..
    halt
  }

  ; check if the command entered was /sync date, if so, continue
  if ($1 == date) {
    set %sync.is.time off
    ; check if there is a value set for the server, if not, set default server
    if (%sync.server == $null) {
    set %sync.server 194.109.6.65
    }
    ; check if there is a value set for the port, if not, set default port
    if (%sync.port == $null) {
    set %sync.port 13
    }
    ; we have a server and port, the command was /sync date, so open a socket and do ya thing
    sockopen at %sync.server %sync.port
    set %sync.show off
    ; i assume we do not want to continue, so here is a good point to halt,
    ; the rest of the script are events, so they will start up the proggy again..
    halt
  }

  ; check if the command entered was /sync show, if so, continue
  if ($1 == show) {
    if ($2 == time) {
    set %sync.is.time on
    goto go
    }
    if ($2 == date) {
    set %sync.is.time off
    goto go
    }
    if ($2 == $null) {
    echo -a  ________________________________________________
    echo -a | Error
    echo -a | Syntax: /sync show <time|date>
    echo -a | Example: /sync show time (this will display current system time & sync time)
    echo -a  ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
    halt
    }
    if (($2 != date) || ($2 != time)) {
    echo -a  ________________________________________________
    echo -a | Error
    echo -a | Syntax: /sync show <time|date>
    echo -a | Example: /sync show time (this will display current system time & sync time)
    echo -a  ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
    halt
    }
    :go
    ; check if there is a value set for the server, if not, set default server
    if (%sync.server == $null) {
    set %sync.server 194.109.6.65
    }
    ; check if there is a value set for the port, if not, set default port
    if (%sync.port == $null) {
    set %sync.port 13
    }
    ; we have a server and port, the command was /sync show, so open a socket and do ya thing
    sockopen at %sync.server %sync.port
    set %sync.show on
    ; i assume we do not want to continue, so here is a good point to halt,
    ; the rest of the script are events, so they will start up the proggy again..
    halt
  }
  ; end sync show
  ; check if there is any command given for the /sync command, (/sync [enter]), if so, goto help.section and display the help screen
  if ($1 == $null) {
    goto help
  }
  ; i think this is the spot to put the last option.. the remaining commands for /sync *
  ; if this, then do that, else... it is not a valid command...
  else {
    echo -a  ________________________________________________
    echo -a | Error
    echo -a | Command not supported; try /sync help
    echo -a  ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
    ; we dont want to continue at all, halt here 
    halt
  }
  ; the above bracket is for else {}

  ; the help.section, used for /sync and /sync help
  :help
  echo -a  ________________________________________________
  echo -a | Help Sync.mrc v. %sync.script.version
  echo -a | - /sync  [displays this help screen] (yes, it is the same as /sync help)
  echo -a | - /sync time [sync system to match atom-time] (yes, the dos box is normal)
  echo -a | - /sync date [sync system to match atom-date] (yes, the dos box is normal)
  echo -a | - /sync server <ip address> [lets you set a new numeric ip address] (default = 194.109.6.65)
  echo -a | - /sync port <number> [lets you set a new numeric port] (default = 13)
  echo -a | - /sync show time [displays current system time & sync time] (doesn't alter your system time)
  echo -a | - /sync show date [displays current system date & sync date] (doesn't alter your system date)
  echo -a | - /sync default [resets the server & port settings to their defaults] (194.109.6.65:13)
  echo -a | - /sync credits [displays the credits screen] (glory to us, ok!)
  echo -a | - /sync help [displays this help screen] (d0h)
  echo -a  ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
}
; end

; display line if socket connection is opened
on *:sockopen:at:{
  echo -a  ________________________________________________
  echo -a | sync
  echo -a | $chr(91) $+ OK $+ $chr(93) connection $chr(91) $+ %sync.server $+ $chr(58) $+ %sync.port $+ $chr(93) established
}
; end

; display line if socket connection is closed
on *:sockclose:at:{
  echo -a | $chr(91) $+ OK $+ $chr(93) connection $chr(91) $+ %sync.server $+ $chr(58) $+ %sync.port $+ $chr(93) closed
  echo -a  ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
}
; end

; get the info from the server and sync the system
; yes, the dos box appears, we know that
on *:sockread:at:{
  if ($sockerr > 0) return
  :nextread
  sockread %temp
  if ($sockbr == 0) return
  if (%temp == $null) %temp = -
  if (%sync.is.time == on) {
    if (%sync.show == off) {
    echo -a | System time will be set to: $extractdatetime(%temp, t)
    run command /c time $extractdatetime(%temp, t)
    }
    if (%sync.show == on) {
    echo -a | System time: $time
    echo -a | Sync time: $extractdatetime(%temp, t)
    }
  }
  if (%sync.is.time == off) {
    set %sync.date.dow $extractdatetime(%temp, w)
    set %sync.date.month $extractdatetime(%temp, m)
    set %sync.date.day $extractdatetime(%temp, d)
    set %sync.date.year $extractdatetime(%temp, y)
    ; displaying sync time according to command show/date sync/date
    if (%sync.show == off) {
    echo -a | System date will be set to: %sync.date.dow $+ $chr(44) %sync.date.day %sync.date.month %sync.date.year
    ;transform to proper format so that DOS/Windows can understand
    set %sync.date.date %temp
    %sync.date.date = $ctime(%sync.date.date)
    %sync.date.date = $asctime(%sync.date.date, dd-mm-yy)
    run command /c date %sync.date.date
    }
    if (%sync.show == on) {
    echo -a | System date: $asctime(dddd) $+ $chr(44) $asctime(dd mmmm yyyy)
    echo -a | Sync date: %sync.date.dow $+ $chr(44) %sync.date.day %sync.date.month %sync.date.year
    }
    ; end
  }
  goto nextread
}
; end

alias  -l isnumip {
  set %buffer $1
  if ($len(%buffer) > 15) { goto end }
  if ($count(%buffer, $chr(46)) != 3) { goto end }
  if ($left(%buffer,1) == $chr(46)) || ($right(%buffer,1) == $chr(46)) { goto end }
  if (.. isin %buffer) { goto end  }
  set %i 1
  while (%i <= 4) {
    if ($gettok(%buffer,%i,46) > 255) { goto end }
    inc %i
  }
  ;it seems we have valid syntax so far, check if it is numeric 
  ;(some of this checking has already been done implicitly, but this is the easy way)
  set %i 1
  while (%i <= $len(%buffer)) {
    if ($mid(%buffer,%i,1) !isnum) && ($mid(%buffer,%i,1) != $chr(46)) { goto end }
    inc %i
  }
  unset %i, %buffer
  return $true
  halt
  :end
  unset %i, %buffer
  return $false
}

; get the /sync date/time components
; assume these are in fixed format! (NTP servers return a fixed length string)
; example: Sat Aug 12 12:42:50 2000
alias -l extractdatetime { 
  if $2 == w {
    return $gettok($1,1,32)
  }
  if $2 == m {
    return $gettok($1,2,32)
  }
  if $2 == d {
    return $gettok($1,3,32)
  }
  if $2 == t {
    return $gettok($1,4,32)
  }
  if $2 == y {
    return $gettok($1,5,32)
  }
}

;
; end of script
;

[Jake]

Op dinsdag 17 juli 2001 17:31 schreef RealCato het volgende:
StatBar downloaden en hem laten synchroniseren met atoomklok

Dat vind ik eigenlijk wel wat voor Ome Bill, omdat standaard in windows te doen (dat synchroniseren dan).
Wel bij een M$ server dan natuurlijk

[RealCato]

Op dinsdag 17 juli 2001 17:58 schreef Jake het volgende:

[..]

Dat vind ik eigenlijk wel wat voor Ome Bill, omdat standaard in windows te doen (dat synchroniseren dan).
Wel bij een M$ server dan natuurlijk

Heeft-ie gedaan, check WinXP, zit tijdsynchronisatie ingebakken....bij een M$ server

[Verwijderd]

Op dinsdag 17 juli 2001 17:49 schreef de_GeBo het volgende:
Zit je toch niet op een netwerk, waarbij tijdens het aanmelden jouw klok gesynchroniseerd wordt met een server ?

Kijk Jos hier zou het probleem wel eens kunnen zitten

[Jake]

Op dinsdag 17 juli 2001 18:06 schreef RealCato het volgende:
Heeft-ie gedaan, check WinXP, zit tijdsynchronisatie ingebakken....bij een M$ server

Ja is logisch, als ik het kan verzinnen, kunnen ze dat in Redmond ook.

FF on-topic: is het zo dat je clock altijd 5 min voor loopt, ook als je 2 of 3 dagen niets aan doet, of loopt ie gewoon 5 mins te hard per dag ?