Hallo,
Ik was op zoek naar een leuke vervanger voor mijn huidige scherm. Nu was het oog gevallen op de Samsung C24FG73 - Curved Gaming Monitor. Nu lijkt het een goede keuze alleen was ik bang dat dit scherm PWM gebruikt. Heb nogal erg snel last van mijn ogen dus een scherm met PWM word helemaal niks.
Heeft iemand toevallig ervaring met dit scherm of weten jullie of dit scherm PWM gebruikt want ik kan er weinig over vinden. Alleen las ik dus dit over strobe backlight mode, dat bij de hoge refresh rates dus gebruikt word. Maar is dit nou ongeveer hetzelfde als PWM?
This model features a 144Hz 23.5” SVA (‘Super’ Vertical Alignment) panel, with a curvature of 1800R. True 8-bit colour is supported alongside a specified 1ms MPRT (Moving Picture Response Time), achieved using the ‘Impulsive Scanning’ strobe backlight mode
Response Time = Faster @144Hz 2.2 6202K A strobe backlight mode is active, so the screen flickers at a frequency of 144Hz. This mild flicker may bother some users, but others wouldn’t find it bothersome. The image is rather bright and brightness control is locked. Balance otherwise similar to factory defaults.
Response Time = Faster @120Hz 2.2 6221K The screen now strobes at 120Hz, so the flicker is slightly more obvious. The brightness is also increased marginally.
Response Time = Faster @100Hz 2.2 6217K The screen strobes at 100Hz, with a similar brightness to 144Hz using the ‘Faster’ setting. The flicker is a bit more noticeable.
Ik was op zoek naar een leuke vervanger voor mijn huidige scherm. Nu was het oog gevallen op de Samsung C24FG73 - Curved Gaming Monitor. Nu lijkt het een goede keuze alleen was ik bang dat dit scherm PWM gebruikt. Heb nogal erg snel last van mijn ogen dus een scherm met PWM word helemaal niks.
Heeft iemand toevallig ervaring met dit scherm of weten jullie of dit scherm PWM gebruikt want ik kan er weinig over vinden. Alleen las ik dus dit over strobe backlight mode, dat bij de hoge refresh rates dus gebruikt word. Maar is dit nou ongeveer hetzelfde als PWM?
This model features a 144Hz 23.5” SVA (‘Super’ Vertical Alignment) panel, with a curvature of 1800R. True 8-bit colour is supported alongside a specified 1ms MPRT (Moving Picture Response Time), achieved using the ‘Impulsive Scanning’ strobe backlight mode
Response Time = Faster @144Hz 2.2 6202K A strobe backlight mode is active, so the screen flickers at a frequency of 144Hz. This mild flicker may bother some users, but others wouldn’t find it bothersome. The image is rather bright and brightness control is locked. Balance otherwise similar to factory defaults.
Response Time = Faster @120Hz 2.2 6221K The screen now strobes at 120Hz, so the flicker is slightly more obvious. The brightness is also increased marginally.
Response Time = Faster @100Hz 2.2 6217K The screen strobes at 100Hz, with a similar brightness to 144Hz using the ‘Faster’ setting. The flicker is a bit more noticeable.
[ Voor 13% gewijzigd door SerSam1 op 01-05-2018 15:53 ]