My PC won't boot. Help is appreciated.

[tieppie]

Hi Guys!

I have a problem with my system, it won’t power up at all, I do hope you can help me.

The components are:
- Motherboard: Gigabyte ga-ab350-Gaming 3 ATX (BIOS version Unknown)
- RAM: Ballistix Sport LT DDR4 2666 UDIMM (2x 8gb) Modelnumber: BLS2C8G4D26BFSEK
- CPU: Ryzen 5 1600x
- CPU Cooler: MSI Core Frozr l
- GPU: Zotac GeForce GTX 1060 1506 zt-p10600 a-10L 6 GB (mini)
- HDD: Samsung MZ-N5E500BW 850 EVO Internal SSD, 500 GB, SATA III, 6 GB/s, M.2
- PSU: Seasonic Prime Focus modular (80 + Gold) 550 watt
- Case: Phanteks Eclipse p400S MIDI-Tower, tempered Glass

Things I’ve tried:

- I have checked the PSU, it works 100%.
- Connected the ‘blue USB3 front panel cable’ and it actually charges my phone via the Front USB slot. So there seems to be power.
- Tried using only 1 RAM module , and tried different slots.
- Tried without HDD
- Tried without GPU

Whenever I push the Power Button on the case. The PC will not start at all. No beeps, no spinning of fans, No LED , nothing.

Could it be a compatibility issue? I found on the Gigabyte support website the Motherboard needs at least F6 version of the BIOS to use the Ryzen 1600X processor. But to be honest, as I can't boot. I can not check the version. So I'm not sure this is the issue.

Maybe you guys have an idea?

Any help is appreciated.

[TheUninvited]

Check the front panel connectors? If your motherboard is powered and it doesn't spin up the fans you could still try to connect a speaker and/or see if it gives error codes if your motherboard has a display for that.

[Foodie88]

It sounds like the on/off switch might not be (correctly) connected to the motherboard. Cross reference it with the manual of your motherboard.

[Microkid]

move --> PMG

[eSCe]

Foodie88 schreef op dinsdag 17 oktober 2017 @ 16:57:
It sounds like the on/off switch might not be (correctly) connected to the motherboard. Cross reference it with the manual of your motherboard.

^This

I think your power button might just be plugged onto the wrong pins.

[Speedy-J]

Check your front pannel connectors first ,I also think this is the problem.

[Bolletje]

Dutch is the only supported language on this forum. Therefore I've closed this topic.

Either start another topic - in Dutch - or ask for help on one of the English/international fora.

Thanks for your understanding.

[ Voor 8% gewijzigd door Bolletje op 17-10-2017 17:55 ]