...Gisteren probleem met onze iMac. Harde schijf geformatteerd en Siërra opnieuw geïnstalleerd. Alles ging daarna goed. Inloggen/registreren etc... Gisteren uitgezet en vanmorgen ging hij weer opstarten. Balkje onder Apple logo kwam tot 75%. Daarna nog een keer en nog een keer maar verder komen ho maar. Nu weer schijf geformatteerd en weer Sierra aan het downloaden. Gaat weer niet lukken. Volgens recovery is de harde schijf goed. Wat kan het zijn? Heb alle opstartcommando's al geprobeerd.
Hier nog enkel gegevens die ik heb uitgelezen:
=== START OF INFORMATION SECTION ===
Model Family: Hitachi/HGST Travelstar Z5K500
Device Model: APPLE HDD HTS545050A7E362
Serial Number: TNS5193T0W915H
LU WWN Device Id: 5 000cca 7b0cc67f2
Firmware Version: GG2AB990
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Jul 10 22:19:59 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 107) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 214 214 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 2604
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 122
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 085 085 000 Old_age Always - 6989
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 2601
160 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 66
193 Load_Cycle_Count 0x0012 068 068 000 Old_age Always - 321299
194 Temperature_Celsius 0x0002 193 193 000 Old_age Always - 31 (Min/Max 15/51)
195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 166
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 37
SMART Error Log Version: 1
ATA Error Count: 22569 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 22569 occurred at disk power-on lifetime: 6985 hours (291 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 c0 e8 b7 01 Error: UNC 8 sectors at LBA = 0x01b7e8c0 = 28829888
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 c0 e8 b7 40 00 01:16:13.146 READ DMA EXT
25 00 08 c0 e8 b7 40 00 01:16:09.535 READ DMA EXT
2f 00 01 10 00 00 00 00 01:16:09.534 READ LOG EXT
60 08 a0 c0 e8 b7 40 00 01:16:05.918 READ FPDMA QUEUED
60 d0 98 f8 fd 9b 40 00 01:16:05.901 READ FPDMA QUEUED
Error 22568 occurred at disk power-on lifetime: 6985 hours (291 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 c0 e8 b7 01 Error: UNC 8 sectors at LBA = 0x01b7e8c0 = 28829888
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 c0 e8 b7 40 00 01:16:09.535 READ DMA EXT
2f 00 01 10 00 00 00 00 01:16:09.534 READ LOG EXT
60 08 a0 c0 e8 b7 40 00 01:16:05.918 READ FPDMA QUEUED
60 d0 98 f8 fd 9b 40 00 01:16:05.901 READ FPDMA QUEUED
25 00 08 c0 e8 b7 40 00 01:16:02.279 READ DMA EXT
Error 22567 occurred at disk power-on lifetime: 6985 hours (291 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 c0 e8 b7 01 Error: UNC at LBA = 0x01b7e8c0 = 28829888
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 a0 c0 e8 b7 40 00 01:16:05.918 READ FPDMA QUEUED
60 d0 98 f8 fd 9b 40 00 01:16:05.901 READ FPDMA QUEUED
25 00 08 c0 e8 b7 40 00 01:16:02.279 READ DMA EXT
25 00 08 c0 e8 b7 40 00 01:15:58.656 READ DMA EXT
25 00 08 c0 e8 b7 40 00 01:15:55.034 READ DMA EXT
Error 22566 occurred at disk power-on lifetime: 6985 hours (291 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 c0 e8 b7 01 Error: UNC 8 sectors at LBA = 0x01b7e8c0 = 28829888
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 c0 e8 b7 40 00 01:16:02.279 READ DMA EXT
25 00 08 c0 e8 b7 40 00 01:15:58.656 READ DMA EXT
25 00 08 c0 e8 b7 40 00 01:15:55.034 READ DMA EXT
25 00 08 c0 e8 b7 40 00 01:15:51.423 READ DMA EXT
2f 00 01 10 00 00 00 00 01:15:51.423 READ LOG EXT
Error 22565 occurred at disk power-on lifetime: 6985 hours (291 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 c0 e8 b7 01 Error: UNC 8 sectors at LBA = 0x01b7e8c0 = 28829888
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 c0 e8 b7 40 00 01:15:58.656 READ DMA EXT
25 00 08 c0 e8 b7 40 00 01:15:55.034 READ DMA EXT
25 00 08 c0 e8 b7 40 00 01:15:51.423 READ DMA EXT
2f 00 01 10 00 00 00 00 01:15:51.423 READ LOG EXT
60 08 90 c0 e8 b7 40 00 01:15:47.817 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Wie kan mij helpen en zeggen waar het aan kan liggen. Ben bang als ik de iMac nu uitzet hij weer niet aangaat.
Hier nog enkel gegevens die ik heb uitgelezen:
=== START OF INFORMATION SECTION ===
Model Family: Hitachi/HGST Travelstar Z5K500
Device Model: APPLE HDD HTS545050A7E362
Serial Number: TNS5193T0W915H
LU WWN Device Id: 5 000cca 7b0cc67f2
Firmware Version: GG2AB990
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Jul 10 22:19:59 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 45) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 107) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 214 214 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0012 099 099 000 Old_age Always - 2604
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 122
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 085 085 000 Old_age Always - 6989
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 2601
160 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 66
193 Load_Cycle_Count 0x0012 068 068 000 Old_age Always - 321299
194 Temperature_Celsius 0x0002 193 193 000 Old_age Always - 31 (Min/Max 15/51)
195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 166
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 37
SMART Error Log Version: 1
ATA Error Count: 22569 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 22569 occurred at disk power-on lifetime: 6985 hours (291 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 c0 e8 b7 01 Error: UNC 8 sectors at LBA = 0x01b7e8c0 = 28829888
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 c0 e8 b7 40 00 01:16:13.146 READ DMA EXT
25 00 08 c0 e8 b7 40 00 01:16:09.535 READ DMA EXT
2f 00 01 10 00 00 00 00 01:16:09.534 READ LOG EXT
60 08 a0 c0 e8 b7 40 00 01:16:05.918 READ FPDMA QUEUED
60 d0 98 f8 fd 9b 40 00 01:16:05.901 READ FPDMA QUEUED
Error 22568 occurred at disk power-on lifetime: 6985 hours (291 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 c0 e8 b7 01 Error: UNC 8 sectors at LBA = 0x01b7e8c0 = 28829888
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 c0 e8 b7 40 00 01:16:09.535 READ DMA EXT
2f 00 01 10 00 00 00 00 01:16:09.534 READ LOG EXT
60 08 a0 c0 e8 b7 40 00 01:16:05.918 READ FPDMA QUEUED
60 d0 98 f8 fd 9b 40 00 01:16:05.901 READ FPDMA QUEUED
25 00 08 c0 e8 b7 40 00 01:16:02.279 READ DMA EXT
Error 22567 occurred at disk power-on lifetime: 6985 hours (291 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 c0 e8 b7 01 Error: UNC at LBA = 0x01b7e8c0 = 28829888
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 a0 c0 e8 b7 40 00 01:16:05.918 READ FPDMA QUEUED
60 d0 98 f8 fd 9b 40 00 01:16:05.901 READ FPDMA QUEUED
25 00 08 c0 e8 b7 40 00 01:16:02.279 READ DMA EXT
25 00 08 c0 e8 b7 40 00 01:15:58.656 READ DMA EXT
25 00 08 c0 e8 b7 40 00 01:15:55.034 READ DMA EXT
Error 22566 occurred at disk power-on lifetime: 6985 hours (291 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 c0 e8 b7 01 Error: UNC 8 sectors at LBA = 0x01b7e8c0 = 28829888
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 c0 e8 b7 40 00 01:16:02.279 READ DMA EXT
25 00 08 c0 e8 b7 40 00 01:15:58.656 READ DMA EXT
25 00 08 c0 e8 b7 40 00 01:15:55.034 READ DMA EXT
25 00 08 c0 e8 b7 40 00 01:15:51.423 READ DMA EXT
2f 00 01 10 00 00 00 00 01:15:51.423 READ LOG EXT
Error 22565 occurred at disk power-on lifetime: 6985 hours (291 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 c0 e8 b7 01 Error: UNC 8 sectors at LBA = 0x01b7e8c0 = 28829888
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 c0 e8 b7 40 00 01:15:58.656 READ DMA EXT
25 00 08 c0 e8 b7 40 00 01:15:55.034 READ DMA EXT
25 00 08 c0 e8 b7 40 00 01:15:51.423 READ DMA EXT
2f 00 01 10 00 00 00 00 01:15:51.423 READ LOG EXT
60 08 90 c0 e8 b7 40 00 01:15:47.817 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Wie kan mij helpen en zeggen waar het aan kan liggen. Ben bang als ik de iMac nu uitzet hij weer niet aangaat.
:strip_icc():strip_exif()/u/352278/crop56730ca93be70_cropped.jpeg?f=community)