Heb 2x een Engenius ENH700EXT.
Nu wil ik bij mijn eigen woning rondom overal wifi hebben, maar wil me ouders die +/- 100m verderop wonen ook laten kunnen internet over mijn verbinding.
De beide ENH700EXT gaan zo geplaats worden dat ze zicht hebben op elkaar.
Nu zie ik verschillende modes in de handleiding staan.
Access Point Mode The most typically used operation mode for the ENH700EXT.
In Access Point mode, the ENH700EXT will allow wireless devices access to transmit and receive data from ENH700EXT
Client Bridge Mode In this mode, the ENH700EXT can connect to another Access Point to extend the range of the wireless network.
Client Router Mode In this mode, the ENH700EXT can be used as a Client Bridge but with support for a WAN type of Internet connection. This is rarely used in commercial environment.
WDS AP With this mode selected, the device can pair with other devices with either WDS AP mode or WDS STA mode. When connected with other ENH700EXT with WDS AP, the device acts as AP plus WDS bridge, therefore repeater function is available while with significant performance cut; When paring WDS AP to WDS STA to other devices (point-to-multipoints), transparent bridging is supported.
WDS Station mode WDS Station (STA) pairs with WDS AP mode. see above WDS Bridge mode In the WDS Bridge Mode, the ENH500 can wirelessly connect different local area networks by configuring each device’s MAC address and security settings.
WDS Bridge mode provide transparent bridging function. unlike Access Point Mode. APs linked by WDS are using the same wireless channel, and connecting excessive numbers of APs on the same channel may result in lower throughput. Please be aware to avoid loop connections; otherwise enable the Spanning Tree Function.
Kom er niet echt uit welke voor mij het beste is.
Iemand advies voor me?
Nu wil ik bij mijn eigen woning rondom overal wifi hebben, maar wil me ouders die +/- 100m verderop wonen ook laten kunnen internet over mijn verbinding.
De beide ENH700EXT gaan zo geplaats worden dat ze zicht hebben op elkaar.
Nu zie ik verschillende modes in de handleiding staan.
Access Point Mode The most typically used operation mode for the ENH700EXT.
In Access Point mode, the ENH700EXT will allow wireless devices access to transmit and receive data from ENH700EXT
Client Bridge Mode In this mode, the ENH700EXT can connect to another Access Point to extend the range of the wireless network.
Client Router Mode In this mode, the ENH700EXT can be used as a Client Bridge but with support for a WAN type of Internet connection. This is rarely used in commercial environment.
WDS AP With this mode selected, the device can pair with other devices with either WDS AP mode or WDS STA mode. When connected with other ENH700EXT with WDS AP, the device acts as AP plus WDS bridge, therefore repeater function is available while with significant performance cut; When paring WDS AP to WDS STA to other devices (point-to-multipoints), transparent bridging is supported.
WDS Station mode WDS Station (STA) pairs with WDS AP mode. see above WDS Bridge mode In the WDS Bridge Mode, the ENH500 can wirelessly connect different local area networks by configuring each device’s MAC address and security settings.
WDS Bridge mode provide transparent bridging function. unlike Access Point Mode. APs linked by WDS are using the same wireless channel, and connecting excessive numbers of APs on the same channel may result in lower throughput. Please be aware to avoid loop connections; otherwise enable the Spanning Tree Function.
Kom er niet echt uit welke voor mij het beste is.
Iemand advies voor me?