Goedemiddag 
Sinds een aantal weken heb ik de hardware verzameld voor een eigen NAS en hierop heb ik Freenas 9.10 draaien. In de nas heb ik 3 nieuwe 3tb schijven en 1 oudere 3tb schijf. Bij het aanmaken van een dataset krijg ik een foutmelding. Omdat ik denk dat het aan de oudere harde schijf ligt heb ik een lange smarttest laten uitvoeren op deze schijf. Freenas zelf geeft ook de volgende foutmelding:
Mijn vraag:
Is de harde schijf het probleem dat ik geen dataset kan aanmaken of is er een andere actie die ik moet uitvoeren op de freenas?
Relevante software en hardware die ik gebruik
Freenas 9.10 met een intel G4400 en 4 3tb schijven.
Freenas alert:
Freenas error bij aanmaken dataset:
Smart test van oudere 3 tb schijf:
Sinds een aantal weken heb ik de hardware verzameld voor een eigen NAS en hierop heb ik Freenas 9.10 draaien. In de nas heb ik 3 nieuwe 3tb schijven en 1 oudere 3tb schijf. Bij het aanmaken van een dataset krijg ik een foutmelding. Omdat ik denk dat het aan de oudere harde schijf ligt heb ik een lange smarttest laten uitvoeren op deze schijf. Freenas zelf geeft ook de volgende foutmelding:
Mijn vraag:
Is de harde schijf het probleem dat ik geen dataset kan aanmaken of is er een andere actie die ik moet uitvoeren op de freenas?
Relevante software en hardware die ik gebruik
Freenas 9.10 met een intel G4400 en 4 3tb schijven.
Freenas alert:
code:
1
2
3
4
5
| CRITICAL: Nov. 22, 2016, 12:35 p.m. - Device: /dev/ada0, 8 Currently unreadable (pending) sectors CRITICAL: Nov. 22, 2016, 12:35 p.m. - Device: /dev/ada0, 8 Offline uncorrectable sectors CRITICAL: Nov. 23, 2016, 12:04 p.m. - Device: /dev/ada0, Self-Test Log error count increased from 0 to 1 OK: Nov. 23, 2016, 4:08 a.m. - There is a new update available! Apply it in System -> Update tab. CRITICAL: Nov. 22, 2016, 7:07 p.m. - The volume Dataset (ZFS) state is UNAVAIL: One or more devices are faulted in response to IO failures. |
Freenas error bij aanmaken dataset:
code:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
| Request Method: GET Request URL: http://192.168.2.27/storage/dataset/create/Dataset/ Software Version: FreeNAS-9.10.1-U4 (ec9a7d3) Exception Type: KeyError Exception Value: 'atime' Exception Location: /usr/local/www/freenasUI/../freenasUI/storage/forms.py in __init__, line 1268 Server time: Sat, 26 Nov 2016 02:44:42 -0800 Traceback Environment: Software Version: FreeNAS-9.10.1-U4 (ec9a7d3) Request Method: GET Request URL: http://192.168.2.27/storage/dataset/create/Dataset/ Traceback: File "/usr/local/lib/python2.7/site-packages/django/core/handlers/base.py" in get_response 105. response = middleware_method(request, callback, callback_args, callback_kwargs) File "/usr/local/www/freenasUI/../freenasUI/freeadmin/middleware.py" in process_view 156. return login_required(view_func)(request, *view_args, **view_kwargs) File "/usr/local/lib/python2.7/site-packages/django/contrib/auth/decorators.py" in _wrapped_view 22. return view_func(request, *args, **kwargs) File "/usr/local/www/freenasUI/../freenasUI/storage/views.py" in dataset_create 477. dataset_form = forms.ZFSDataset(initial=defaults, fs=fs) File "/usr/local/www/freenasUI/../freenasUI/storage/forms.py" in __init__ 1268. parentdata['atime'][0] Exception Type: KeyError at /storage/dataset/create/Dataset/ Exception Value: 'atime' equest information GET No GET data POST No POST data FILES No FILES data COOKIES Variable Value csrftoken 'P2BCSEtt1tCFx1vQMmrOzGHjVn72pziZ' sessionid 'g2v9kmdmkxljqfydmi01an1sbk6ixt5n' fntreeSaveStateCookie 'root%2Croot%2F53%2Croot%2F53%2F54%2Croot%2F53%2F54%2F55' META Variable Value HTTP_REFERER 'http://192.168.2.27/' wsgi.multiprocess False SERVER_SOFTWARE 'nginx/1.8.1' PATH_INFO u'/storage/dataset/create/Dataset/' HTTPS '' HTTP_X_REQUESTED_WITH 'XMLHttpRequest' HTTP_ACCEPT '*/*' wsgi.multithread True SERVER_PORT '80' SCRIPT_NAME u'' CONTENT_LENGTH '' HTTP_USER_AGENT 'Mozilla/5.0 (Windows NT 6.2; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/54.0.2840.99 Safari/537.36' DOCUMENT_URI '/storage/dataset/create/Dataset/' HTTP_HOST '192.168.2.27' HTTP_CONTENT_TYPE 'application/x-www-form-urlencoded' HTTP_ACCEPT_ENCODING 'gzip, deflate, sdch' wsgi.input <flup.server.fcgi_base.InputStream object at 0x8150a7e10> HTTP_COOKIE 'sessionid=g2v9kmdmkxljqfydmi01an1sbk6ixt5n; csrftoken=P2BCSEtt1tCFx1vQMmrOzGHjVn72pziZ; fntreeSaveStateCookie=root%2Croot%2F53%2Croot%2F53%2F54%2Croot%2F53%2F54%2F55' REQUEST_URI '/storage/dataset/create/Dataset/' REDIRECT_STATUS '200' wsgi.version (1, 0) SERVER_NAME 'localhost' SERVER_PROTOCOL 'HTTP/1.1' CSRF_COOKIE u'P2BCSEtt1tCFx1vQMmrOzGHjVn72pziZ' HTTP_ACCEPT_LANGUAGE 'nl-NL,nl;q=0.8,en-US;q=0.6,en;q=0.4,es;q=0.2' REQUEST_METHOD 'GET' REMOTE_ADDR '192.168.2.47' wsgi.run_once False SERVER_ADDR '192.168.2.27' wsgi.url_scheme 'http' GATEWAY_INTERFACE 'CGI/1.1' DOCUMENT_ROOT '/usr/local/etc/nginx/html' wsgi.errors <flup.server.fcgi_base.TeeOutputStream object at 0x8151a4b10> HTTP_CONNECTION 'keep-alive' QUERY_STRING '' REMOTE_PORT '1398' CONTENT_TYPE 'application/x-www-form-urlencoded' |
Smart test van oudere 3 tb schijf:
code:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
| [root@freenas] ~# smartctl -a /dev/ada0
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST3000DM001-9YN166
Serial Number: Z1F0TCZA
LU WWN Device Id: 5 000c50 04dd590a1
Firmware Version: CC4B
User Capacity: 3,000,591,900,160 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Nov 26 02:47:56 2016 PST
==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 118) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 584) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 331) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 119205272
3 Spin_Up_Time 0x0003 093 092 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 094 094 020 Old_age Always - 6712
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 042 042 030 Pre-fail Always - 970667832751
9 Power_On_Hours 0x0032 074 074 000 Old_age Always - 23062
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 624
183 Runtime_Bad_Block 0x0032 099 099 000 Old_age Always - 1
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 094 094 000 Old_age Always - 6
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0
189 High_Fly_Writes 0x003a 099 099 000 Old_age Always - 1
190 Airflow_Temperature_Cel 0x0022 071 047 045 Old_age Always - 29 (0 4 32 28 0)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1193
193 Load_Cycle_Count 0x0032 078 078 000 Old_age Always - 45783
194 Temperature_Celsius 0x0022 029 053 000 Old_age Always - 29 (128 0 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 8
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 8
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 4
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 11411h+40m+34.215s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 1203520867229
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 15818764943807
SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2 occurred at disk power-on lifetime: 13468 hours (561 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 01:02:12.476 READ DMA EXT
25 00 08 ff ff ff ef 00 01:02:12.475 READ DMA EXT
25 00 08 ff ff ff ef 00 01:02:12.475 READ DMA EXT
25 00 08 ff ff ff ef 00 01:02:12.475 READ DMA EXT
25 00 08 ff ff ff ef 00 01:02:12.475 READ DMA EXT
Error 1 occurred at disk power-on lifetime: 13468 hours (561 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 ff ff ff ef 00 01:02:09.565 READ DMA EXT
25 00 80 ff ff ff ef 00 01:02:09.564 READ DMA EXT
25 00 80 ff ff ff ef 00 01:02:08.322 READ DMA EXT
25 00 80 ff ff ff ef 00 01:02:08.314 READ DMA EXT
25 00 80 ff ff ff ef 00 01:02:05.171 READ DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 60% 22999 3168575040
# 2 Short offline Aborted by host 10% 22997 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay. |