Raspberry Pi alternatief met Toslink of digitale coax

Pagina: 1
Acties:

  • kipsofthemud
  • Registratie: Juni 2010
  • Laatst online: 09-02 00:54
Ik zoek een?
Alternatief voor de Raspberry Pi 2 (omdat deze alleen 5.1 geluid via HDMI kan weergeven) met een toslink of digitale coax aansluiting. Mijn Z5500 set van logitech heeft helaas geen HDMI doorvoer.

Wat is je budget?
120 euro.

Heb je bepaalde (merk)voorkeuren?
Het liefst zou ik een zo zuinig mogelijk mini systeempje kopen wat met gemak 1080p content met DTS stream aan kan en een vloeiende (bijv.) OpenELEC ervaring geeft.

Specificeer het systeem en de omgeving waarin je het product gaat gebruiken.?
Als mediaspeler die van de Windows Server 2012 server / NAS videobestanden kan afspelen en aangesloten kan worden op de Logitech Z5500 (analoog 3,5mm 5.1, toslink of digitale coax aansluitingen).

Alvast bedankt :)

  • Raven
  • Registratie: November 2004
  • Niet online

Raven

Marion Raven fan

kipsofthemud schreef op vrijdag 04 september 2015 @ 15:48:
Alternatief voor de Raspberry Pi 2 (omdat deze alleen 5.1 geluid via HDMI kan weergeven) met een toslink of digitale coax aansluiting.
Kun je niet een externe geluidskaart gebruiken om zo'n 5.1 uitgang te creëren? http://elinux.org/RPi_VerifiedPeripherals#USB_Sound_Cards

After the first glass you see things as you wish they were. After the second you see things as they are not. Finally you see things as they really are, and that is the most horrible thing in the world...

Oscar Wilde


  • Daniel36
  • Registratie: December 2009
  • Laatst online: 18:46

Daniel36

Het oude liedje

Of op de rpi een hifiberry met toslink en coax, vrij duur wel a 35 euro

  • Raven
  • Registratie: November 2004
  • Niet online

Raven

Marion Raven fan

After the first glass you see things as you wish they were. After the second you see things as they are not. Finally you see things as they really are, and that is the most horrible thing in the world...

Oscar Wilde


  • kipsofthemud
  • Registratie: Juni 2010
  • Laatst online: 09-02 00:54
Raven schreef op vrijdag 04 september 2015 @ 15:58:
[...]

Kun je niet een externe geluidskaart gebruiken om zo'n 5.1 uitgang te creëren? http://elinux.org/RPi_VerifiedPeripherals#USB_Sound_Cards
De meeste van die opties hebben geen ondersteuning voor DTS, of ik moet er een aparte set boxen bij kopen/nieuwe subwoofer. Ook heb ik gelezen dat er vaak geen 5.1 geluid over USB gestuurd kan worden bij de Pi en dat het toch op de een of andere manier als mono geluid er uit komt...

  • Daniel36
  • Registratie: December 2009
  • Laatst online: 18:46

Daniel36

Het oude liedje


  • kipsofthemud
  • Registratie: Juni 2010
  • Laatst online: 09-02 00:54
Die Hifiberry oplossing ziet er wel goed uit en dat maakt het als geheel nog steeds een goedkope oplossing :) Thanks, ik ga eens uitzoeken hoe de DTS ondersteuning is in OpenELEC etc omdat er op de site van Hifiberry staat "Important note: While the hardware is able to output DTS/Dolby Digital, software has to be adapted to support this. We will support the developers to implement this. Unfortunately we can’t guarantee that this feature will work with a specific software. Please ask the developers of the software if this is supported."

Bedankt voor de reacties!

  • loki504
  • Registratie: Januari 2012
  • Laatst online: 19:04
pricewatch: CuBox-i1

eventueel dit een optie?

  • kipsofthemud
  • Registratie: Juni 2010
  • Laatst online: 09-02 00:54
Op zich een mooi dingetje zo helemaal kant en klaar, maar volgens de omschrijving is hij anderhalf keer zo snel als de Pi (1), maar de Pi 2 is 6x zo snel als de Pi 1 :( het nieuwere model CuBox is meteen weer 150 euro helaas.

Ik denk dat het toch de Pi 2 met Hifiberry gaat worden :)
Pagina: 1