TX97-E - BIOS Upgrade and Road Map :
xe5i0107.zip
TX97-E BIOS ver. 0107
1.Release I/O ports 290h-297h if LM78 is not supported.
2.Fix unexpectedly power-up occurred in case where the system is put into an off state
by a 'power-button > 4 sec' event and the system was in a standby state when this
power-button event generated.
3.Support IOMEG ZIP 100 boot.
4.Fix CDROM boot fail if system is SCO and emulate to floppy
5.Fix DOS6.22 fdisk.exe size not match with WIN95 OS-R2
6.Fix Quantum 12GB drive detect as 8GB.
7.Fix SCO OS bootable CDROM for install error
8.Add USB keyboard 102-Key support.
9.Fix cannotformat 120MB diskette in WIN95-OSR2 when insert 720KB or 1.44MB
diskette in drive before WIN95 boot
10.Fix cannotformat 120MB diskette in WIN95-OSR2 when dirve A is 1.44MB standard
Floppy and drive B is LS120 drive
11.Change FAN speed display to match LDCM FAN speed value. LDCM reported 1/2 of the
'actual' RPM value.
12.Remove Boot Up Speed item.
13.Fix IRQ12 not reserved when setting PS/2 Mouse Function Control to Enabled.
xe5i0108.zip
TX97-E BIOS ver. 0108
1.Fix NSTL year 2000 test failed.
2.Fix 64K boundary error if INT13 extention is called.
3.Fix Goldstar 16x CD-ROM not detected.
4.Fix IDE HDD Auto detect to Large Mode unexpectedly.
5.Fix NT 4.0 with 4 COM ports (some add-on SIO cards) not recognized correctly.
6.Improve ATAPI identification detecting algorithm to speed up auto-detect with some
CD-ROMs. (on Master channel only)
7.Add USB IRQ Enable/Disable feature.
8.Fix garbage message appeared in the first line of screen after screen was scrolled up
one line. (4 IDE Auto+2 PnP)
9.Fix Game port not function properly under some kind configurations.
10.Enable Wake On Lan feature.
11.Support LDCM 3.1 for Win95.
12.Fix [IBM-DHEA-38451] 8.3G size detection error.
13.Fix fan cannot be stopped in Suspend state if PS2 mouse is not attached.
14.Fix Xpoint Quadswitch Ethernet LAN card not work.
15.Revise the ATA/ATAPI auto-detect alogrithm.
16.Fix cannotformat 1.44MB diskette in LS120 drive when dirve A is 1.44MB standard
Floppy and drive B is LS120.
17.Fix HDD Display size wrong in system config table if Partition table is invalid.
18.Fix IDT-C6 cannot work with NT/OS2.
19.Fix GLINT Frame buffer cannotbe accessed.
20.Fix Intel EtherExpress 10 not recognized.
21.Fix Mylex DAC960PG PCI Raid Controller ROM not initialized.
22.Fix Showing Garbage if LS120 Only
23.Fix some model of TEAC CDROM (model is CD-524E) boot fail
24.Fix NumLock LED status incorrect after warm-boot if "NumLED=OFF" in setup.
http://www.asus.com.tw/products/motherboard/bios_socket7.html#tx97-e
http://come.to/HardwareXpo