Check alle échte Black Friday-deals Ook zo moe van nepaanbiedingen? Wij laten alleen échte deals zien

Cisco DSL RFC1483 LLC Route bridged

Pagina: 1
Acties:

  • Kabouterplop01
  • Registratie: Maart 2002
  • Laatst online: 21:38

Kabouterplop01

chown -R me base:all

Topicstarter
Sinds jaar en dag een zich statisch gedragend ip adres gehad op de atm interface.
Echter dit is nu DHCP geworden.

van:
code:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip virtual-reassembly
ip route-cache flow
no ip mroute-cache
no atm ilmi-keepalive
dsl operating-mode auto
dsl enable-training-log failure
!
interface ATM0.1 point-to-point
description ATM Routed Bridge Encapsulation
ip address <***static ip address here***>
ip verify unicast reverse-path
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
no ip mroute-cache
logging event subif-link-status
no snmp trap link-status
atm route-bridged ip
pvc 0/35
encapsulation aal5snap


naar:
code:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip virtual-reassembly
ip route-cache flow
no ip mroute-cache
no atm ilmi-keepalive
dsl operating-mode auto
dsl enable-training-log failure
!
interface ATM0.1 point-to-point
description ATM Routed Bridge Encapsulation
ip address dhcp
ip verify unicast reverse-path
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
no ip mroute-cache
logging event subif-link-status
no snmp trap link-status
atm route-bridged ip
pvc 0/35
encapsulation aal5snap


ik stuur een broadcast uit op atm0.1 (dhcp debug detail)
- atm0 IS UP UP
- atm0.1 is UP UP
cisco configs nagelopen, ook de documentatie erbij gehouden, maar geen resultaat.
De helpdesk ziet de request voorbij komen, maar ik krijg geen ip adres uit gedeeld.
Uit de debug : Unknown DHCP problem.. No allocation possible

Heb de config ook weer terug gebouwd naar static maar dat helpt niet.

Is er iemand die ziet wat ik over het hoofd zie?

  • plizz
  • Registratie: Juni 2009
  • Laatst online: 22:25
Gebruik je ISP geen PPPoe ? Dan moet je dialer interface toevoegen.
code:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
interface atm 0.1 point-to-point
pppoe-client dial-pool-number 1
!
interface Dialer1
ip address negotiated
ip mtu 1492
ip nat outside
encapsulation ppp
ip tcp adjust-mss 1452
dialer pool 1
ppp authentication chap callin
ppp chap hostname xxxxx
ppp chap password 0 xxxxxx 
ppp ipcp dns request

  • Kabouterplop01
  • Registratie: Maart 2002
  • Laatst online: 21:38

Kabouterplop01

chown -R me base:all

Topicstarter
plizz schreef op zaterdag 15 november 2014 @ 12:14:
Gebruik je ISP geen PPPoe ? Dan moet je dialer interface toevoegen.
nope RFC1483 LLC bridged (waar route bridged van is gemaakt)

Het vervelende is dat ik geen atm segment ping kan doen ook, dus ik weet echt niet waar ik het moet zoeken.
Ofmoet ik het juíst daar zoeken?

edit 2:
hmm stukje verder.
heldesk geeft aan dat het ip wat ik static had weer terugkrijg vanuit een lease.

heb een access-list op mijn interface gezet om te debuggen;
code:
1
access-list x permitted udp <ip add dhcp server>(67) -> <oude static ip addr>(68), x packets

_/-\o_

However m'n interface neemt dat ip adres niet aan.
snap er geen klap van 8)7

[ Voor 54% gewijzigd door Kabouterplop01 op 15-11-2014 13:20 ]