Geforce flashen... Lukt niet !!!!! Wie weet wat?

[Verwijderd]

Hi

ik heb een Hercules 3d prophet 2 mx videokaart, die wou ik gaan flashen, dus ik naar de website van hercules, biosje gedowload, ik c:\gflash ofzo gezet in ieder geval zoals de bedoeling was volgens de readme, ik naar MS-dos modus (start, afsluiten, ms-dos modus), Proggie gestart (Compleet volgens handleiding), zegt ie dat ie geen Guillemot kaart kan vinden !!!!!

Ikke drivers van guillemot geinstalleerd, nog niets!

Ik heb alles goed gedaan!

Wie weet wat?

[Verwijderd]

heb je backup van oude bio's ? anders ben je De lul

[Verwijderd]

How-to dump using NVFlash 3.03
NVidia changed the options in version 3.00 so here is a tutorial on how to dump your BIOS using NVFlash 3
16.Download NVFlash 3.03 (or newer), (in the BIOS -> Flashing (& Dumping) Tools area ) and DOS4GW (also in the BIOS -> Flashing (& Dumping) Tools area).
17.Extract all files in one directory
18.Restart in MS-DOS mode (Press F8 while booting, choose Boot to MS-DOS Prompt).
19.Go the directory where you had extracted.
20.Type: "NVFlash -bBIOSNAME.ROM". (Exchange BIOSNAME.ROM for the name you wish to give to the dumped BIOS.)
You've now dumped your BIOS.......

How-to flash using NVFlash 3.03
NVidia changed the options in version 3.00 so here is a tutorial on how to flash your BIOS using NVFlash 3
21.First of all... Backup your BIOS!
22.Download NVFlash 3.03 (or newer), (in the BIOS -> Flashing (& Dumping) Tools area) and DOS4GW (also in the BIOS -> Flashing (& Dumping) Tools area).
23.Extract all files in one directory and copy the reference bios you wish to flash also in the directory.
24.Restart in MS-DOS mode (Press F8 while booting, choose Boot to MS-DOS Prompt).
25.Go the directory where you had extracted everything and type: "NVFlash -r". This will disable write-protection in case it is activated on your card. Your monitor might turn off for a while but that's ok.
26.Now type: "nvflash -fBIOSNAME.ROM" (Exchange BIOSNAME.ROM for the name of your bios. Example: "nvflash -fnv5bt.rom"). Your monitor will go in a stand-by (up to a minute). DO NOT RESTART THE COMPUTER UNTIL THE SCREEN HAS COME BACK!
27.Now relax and press CTRL-ALT-DEL. If everything had gone right than your system should now display the newly flashed BIOS. If your system doesn't come up you fucked-up your card...
Your system should now be happily running the BIOS you wanted to flash.


hoop dat het je wat helpt.