beste tweakers,
lang verhaal maar door browsergekloot was t allemaal weg....
daarom korte versie:
1. ik had vorige week dat mn linux pc ineens niet meer boot, grub gaf aan dat de filesystem niet readable was oid
2. ik check in parted magic de smart-status: read errors, bad bloks... oh oh
3. googlen vertelde me dat het wissen van de schijf kon helpen --> schijf gewist
4. nieuwe partitie tabel aangemaakt met gparted --> alles lijkt goed
5. rebooten, bios geeft schijf aan als 0GB capacity....
6. nogmaals in gparted is de schijf ineens 32mb, net als in andere dos tooltjes. Die 32mb was wel te partitioneren...
7. googlen leert me dat je de max. capacity soms kunt instellen -->werkte niet
8. vanavond weer schijf gewist en nieuwe partities gemaakt met gparted, alles lijkt goed. IN bios ook 1000gb capacity weergegeven.
Maar:
De smart-test geven nog steeds errors. Zowel de short als long self test geven me errors.
Moet ik deze schijf heel snel de garantie insturen of kan ik hem gewoon blijven gebruiken voor multimedia ed?
Smart:log http://pastebin.com/tYrpxkjG
lang verhaal maar door browsergekloot was t allemaal weg....
daarom korte versie:
1. ik had vorige week dat mn linux pc ineens niet meer boot, grub gaf aan dat de filesystem niet readable was oid
2. ik check in parted magic de smart-status: read errors, bad bloks... oh oh
3. googlen vertelde me dat het wissen van de schijf kon helpen --> schijf gewist
4. nieuwe partitie tabel aangemaakt met gparted --> alles lijkt goed
5. rebooten, bios geeft schijf aan als 0GB capacity....
6. nogmaals in gparted is de schijf ineens 32mb, net als in andere dos tooltjes. Die 32mb was wel te partitioneren...
7. googlen leert me dat je de max. capacity soms kunt instellen -->werkte niet
8. vanavond weer schijf gewist en nieuwe partities gemaakt met gparted, alles lijkt goed. IN bios ook 1000gb capacity weergegeven.
Maar:
De smart-test geven nog steeds errors. Zowel de short als long self test geven me errors.
Moet ik deze schijf heel snel de garantie insturen of kan ik hem gewoon blijven gebruiken voor multimedia ed?
Smart:log http://pastebin.com/tYrpxkjG
smartctl 5.43 2012-06-30 r3573 [i686-linux-3.8.13-pmagic] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital AV-GP (Adv. Format)
Device Model: WDC WD10EURS-630AB1
Serial Number: WD-WCAV5V513588
LU WWN Device Id: 5 0014ee 25b9d9d2c
Firmware Version: 80.00A80
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sat Jul 20 21:30:11 2013 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (20880) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 240) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 199 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 193 179 021 Pre-fail Always - 6333
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 664
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 097 097 000 Old_age Always - 2324
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 223
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 54
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 609
194 Temperature_Celsius 0x0022 112 091 000 Old_age Always - 35
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 2
SMART Error Log Version: 1
ATA Error Count: 79 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 79 occurred at disk power-on lifetime: 2079 hours (86 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 50 7e 73 eb Error: UNC 128 sectors at LBA = 0x0b737e50 = 192118352
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 80 d2 7d 73 eb 00 02:57:15.614 READ DMA
ec 00 00 00 00 00 a0 00 02:57:15.605 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 02:57:15.597 SET FEATURES [Set transfer mode]
Error 78 occurred at disk power-on lifetime: 2079 hours (86 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 50 7e 73 eb Error: UNC 128 sectors at LBA = 0x0b737e50 = 192118352
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 80 d2 7d 73 eb 00 02:57:12.917 READ DMA
ec 00 00 00 00 00 a0 00 02:57:12.908 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 02:57:12.900 SET FEATURES [Set transfer mode]
Error 77 occurred at disk power-on lifetime: 2079 hours (86 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 50 7e 73 eb Error: UNC 128 sectors at LBA = 0x0b737e50 = 192118352
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 80 d2 7d 73 eb 00 02:57:10.231 READ DMA
ec 00 00 00 00 00 a0 00 02:57:10.222 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 02:57:10.215 SET FEATURES [Set transfer mode]
Error 76 occurred at disk power-on lifetime: 2079 hours (86 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 50 7e 73 eb Error: UNC 128 sectors at LBA = 0x0b737e50 = 192118352
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 80 d2 7d 73 eb 00 02:57:07.534 READ DMA
ec 00 00 00 00 00 a0 00 02:57:07.525 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 02:57:07.517 SET FEATURES [Set transfer mode]
Error 75 occurred at disk power-on lifetime: 2079 hours (86 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 50 7e 73 eb Error: UNC 128 sectors at LBA = 0x0b737e50 = 192118352
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 80 d2 7d 73 eb 00 02:57:04.837 READ DMA
ec 00 00 00 00 00 a0 00 02:57:04.828 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 02:57:04.820 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 2324 134927944
# 2 Short offline Completed: read failure 10% 2324 189549600
# 3 Short offline Completed: read failure 10% 2322 189549600
# 4 Short offline Completed: read failure 10% 2322 189549600
# 5 Short offline Completed: read failure 10% 2321 189549600
# 6 Short offline Completed: read failure 90% 2312 189547320
# 7 Short offline Completed: read failure 90% 2311 189547320
# 8 Short offline Completed: read failure 90% 2310 189547320
# 9 Short offline Completed: read failure 90% 2310 189547320
#10 Short offline Completed: read failure 90% 2310 189547320
#11 Short offline Completed: read failure 90% 2310 189547320
#12 Short offline Completed: read failure 90% 2310 189547320
#13 Short offline Completed: read failure 90% 2310 189547320
#14 Short offline Completed: read failure 90% 2310 189547320
#15 Extended offline Completed: read failure 90% 2309 189547320
#16 Short offline Completed: read failure 90% 2309 189547320
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
/u/87795/voetje.png?f=community)
/u/221823/crop5db1c1f284bca_cropped.png?f=community)
Hun garantie is goed geregeld!