Van een Britse website gedownload, een setup wizard met losse templates bijgevoegd.
Deze is specifiek voor NL (tg789, tg789v2, tg789v3) :
' 2012-10-16 extended generic CWMP, script, tls, etc. to prevent locked models shafting setup after reboot
' 2012-10-03 added generic CWMP to prevent locked models shafting setup after reboot
' added generic DNSS to allow reliable URL web-config access
' 2012-05-04 NL translation updated (thanks: Speedmaster)
' 2012-05-02 r8 order: efm, sntpc, xdsl, env, wizard, phone, ipqos, qos, atm, wireless, vlan_res, vlan_priomap, bridge,
' vlanbridge, bridgevlan, vlanbridge_del, vlanbridgerule, bridgeunknownvlan, igmpsnooping, eth,
' pptp, ppprelay, dhcspool, label, ppp, ip, ipqosmeter, dnss, dhcrule, dhcs, dhcr, dhcc, expr,
' labelrule, nat, igmp, connection, system, dsd, wansensing, mlpuser, voice, servmgr
' 2012-03-20 added empty wansensing section to defeat ISP auto-re-config mechanisms
' bugfix: syntax error on DE WLAN Security Type (Sicherheitstyp) translation
' added Date/Time NTP-Server setup section
' 2011-10-06 bugfix: translation crossed-wires fixed
' 2011-09-30 bugfix to WLAN locale options hidden below dialog; added 789vn v2
' 2011-09-19 added 789vn v3
' 2011-08-01 Mod: region changed to `Nederland' from `All'
[ sntpc.ini ]
add name=$GEO version=3
config state=enabled poll=60 pollpresync=5
[ script.ini ]
flush
[ env.ini ]
set var=CONF_DEVICE value="789vn|789vn v2|789vn v3"
set var=CONF_REGION value="Nederland"
set var=CONF_PROVIDER value="tr(2,VDSL-NL)"
set var=CONF_DESCRIPTION value="tr(3,PPPoE across VDSL, spoofing. This is suitable for The Netherlands (VID=6).)"
set var=CONF_SERVICE value="tr(4,PPPoE over VDSL, spoofing - NL)"
set var=CONF_DATE value=""
set var=CONF_DATETIME value="0001-01-01T00:00:00Z"
set var=CONF_TPVERSION value="2.0.0"
set var=HOST_SETUP value="auto"
set var=HOST_LANGUAGE value="en"
set var=UPGRADE_URL value="http://downloads.thomson.net/telecom/upgrade/upgrade.htm"
set var=IS_NOT_DSL_DEVICE value=0
set var=%ST_SYS_USERID value="Administrator"
set var=%ST_SYS_PASSWORD value=""
set var=%TG_SYS_PASSWORD value=""
set var=WL0_SSID_PREFIX_CUSTOM value=Thomson
set var=WL1_SSID_PREFIX_CUSTOM value=ThomCom
set var=WL2_SSID_PREFIX_CUSTOM value=ThomMob
set var=WL3_SSID_PREFIX_CUSTOM value=ThomGst
set var=WL0_SSID value=${WL0_SSID_PREFIX_CUSTOM}${_SSID_POSTFIX_LEGACY_OR_MAC}
set var=WL1_SSID value=${WL1_SSID_PREFIX_CUSTOM}${_SSID_POSTFIX_LEGACY_OR_MAC}
set var=WL2_SSID value=${WL2_SSID_PREFIX_CUSTOM}${_SSID_POSTFIX_LEGACY_OR_MAC}
set var=WL3_SSID value=${WL3_SSID_PREFIX_CUSTOM}${_SSID_POSTFIX_LEGACY_OR_MAC}
set var=TPL_VERSION value=20121016
set var=SESSIONTIMEOUT value=3600
[ wizard.ini ]
'ST Security
'-----------
def var=ST type=grp desc="tr(17,Specify user name and password to prevent unwanted access to the Thomson Gateway management interface.)" alias="tr(18,Access Control)"
def var=%ST_SYS_USERID type=string grp=ST alias="tr(19,User Name)" req=yes desc="tr(20,Enter a user name.)"
def var=%ST_SYS_PASSWORD type=passw grp=ST alias="tr(21,Password)" desc="tr(22,Enter a password.)" max=32
def var=%dummy2 type=passwcheck grp=ST alias="tr(23,Confirm Password)" desc="tr(24,Re-enter the password.)" linkvar=%ST_SYS_PASSWORD max=32
'LAN/WAN Access
'--------------
def var=TG type=grp desc="tr(63,Specify an extra user name and password to give access from either LAN or WAN to the Thomson Gateway management interface. To ignore this, enter nothing and click 'Next'.)" alias="tr(18,Access Control)"
def var=%TG_SYS_USERID type=string grp=TG alias="tr(19,User Name)" req=yes desc="tr(20,Enter a user name.)" default="su"
def var=%TG_SYS_PASSWORD type=passw grp=TG alias="tr(21,Password)" desc="tr(22,Enter a password.)" max=32
def var=%dummy2 type=passwcheck grp=TG alias="tr(23,Confirm Password)" desc="tr(24,Re-enter the password.)" linkvar=%TG_SYS_PASSWORD max=32
def var=TG_SYS_ROLE type=radioset grp=TG req=yes alias="Role" data="SuperUser,root" dalias="SuperUser,Root" default="SuperUser"
' Date/Time
'--------
def var=DT type=grp desc="tr(100,Specify your geographic location. This will be used to establish and keep the correct local date and time within the Gateway from a nearby NTP Server.)" alias="tr(101,Date, Time + Geolocation)"
def var=GEO type=combo grp=DT req=yes alias="Geo-Location" data="africa.pool.ntp.org,asia.pool.ntp.org,europe.pool.ntp.org,north-america.pool.ntp.org,oceania.pool.ntp.org,south-america.pool.ntp.org" desc="tr(102,Choose your continent from this list of NTP Servers)" default="europe.pool.ntp.org"
def var=TZ type=combo grp=DT req=yes alias="TimeZone" data="-12:00,-11:00,-10:00,-09:00,-08:00,-07:00,-06:00,-05:00,-04:00,-03:00,-02:00,-01:00,+00:00,+01:00,+02:00,+03:00,+04:00,+05:00,+06:00,+07:00,+08:00,+09:00,+10:00,+11:00,+12:00,+13:00,+14:00" desc="tr(103,Choose your Time Zone (UTC))" default="+00:00"
def var=DST type=radioset grp=DT req=yes alias="DST" data="disabled,enabled" dalias="tr(104,'Daylight Saving Time OFF','Daylight Saving Time ON')" default="disabled"
' PPP Settings
'-------------
def var=PPP type=grp desc="tr(9,Specify the details of your Internet Account. All information should be provided by your ISP.)" alias="tr(10,Internet Account Settings)"
def var=ST_PPP_USER type=string grp=PPP alias="tr(11,User Name)" req=yes desc="tr(12,Enter your Internet connection user name.)"
def var=%ST_PPP_PASSWORD type=passw grp=PPP alias="tr(13,Password)" req=yes desc="tr(14,Enter your Internet connection password.)" max=32
def var=%dummy1 type=passwcheck grp=PPP alias="tr(15,Confirm Password)" desc="tr(16,Re-enter your password.)" linkvar=%ST_PPP_PASSWORD max=32
' Wireless Security
'--------
def var=SEC type=grp desc="tr(30,Specify the type of wireless <b>Network Name</b>, <b>Security Type</b> and <b>WPA Preshared Key</b>. The label on the bottom of the router details the Security Key to use with WEP security.)" alias="tr(31,Wireless Security)"
def var=WL0_SSID1 type=string grp=SEC alias="tr(32,Wireless Name (SSID))" req=yes desc="tr(33,Enter your desired network name.)" min=4 max=32 default=$WL0_SSID
def var=WirelessSec type=radioset grp=SEC req=yes alias="tr(34,Security Type)" data="disable,wep,wpa-psk" dalias="tr(35,'Disabled (Unsecure) Red WLAN LED','WEP (64bit HEX Key) Orange WLAN LED','WPA+WPA2 (Preshared Key) Green WLAN LED')" default="wpa-psk"
def var=WirelessKey type=string grp=SEC alias="tr(36,WPA+WPA2 Preshared Key)" desc="tr(37,(only used if WPA+WPA2 is chosen above.))" min=8 max=32 default=$_WL0_WPAKEY_SERIAL
def var=WPAKeyInfo type=label grp=SEC desc="tr(38,<b>Note</b> WPA+WPA2 Keys are <b>CaSE SEnsiTIvE</b>. Ensure you enter the information correctly when configuring your wireless client.)"
' Wireless Locale
'--------
def var=FINAL type=grp desc="tr(64,Specify your Wireless Locale.)" alias="tr(65,Wireless Locale)"
def var=WirelessLoc type=radioset grp=FINAL req=yes alias="WLAN Locale" data="Worldwide,Israel,Jordan,China,Europe,Singapore" default="Europe"
def var=LocaleInfo type=label grp=FINAL desc="tr(66,This is the last screen. When you press 'Next', your router will be setup with all the options that you have chosen. If you press 'Cancel', your router configuration will remain unchanged.)"
[ phone.ini ]
[ ipqos.ini ]
[ qos.ini ]
config format=bytes
[ atm.ini ]
[ wireless.ini ]
ifconfig channel=auto flags=bootup state=enabled
ifconfig ssid=$WL0_SSID1
ifconfig locale=$WirelessLoc
qos config mode=wmm
secmode config mode=wep
secmode wpa-psk presharedkey=$WirelessKey
secmode wpa-psk version=WPA+WPA2
secmode config mode=$WirelessSec
wds config state=disabled
[ vlan_res.ini ]
add name=WAN vid=2 addrule=disabled
add name=Internet_vdsl vid=6 addrule=disabled
[ vlan_priomap.ini ]
config entry=prio_0_7_2vlan priomap=0,0,0,0,0,0,0,0
config entry=prio_8_15_2vlan priomap=0,0,5,0,0,0,5,0
config entry=prio_0_7_2de priomap=0,0,0,0,0,0,0,0
config entry=prio_8_15_2de priomap=0,0,0,0,0,0,0,0
config entry=vlan2prio_de_0 priomap=4,0,2,6,8,10,14,15
config entry=vlan2prio_de_1 priomap=4,0,2,6,8,10,14,15
[ bridge.ini ]
ifadd brname=bridge intf=ethport2 dest=ethif2 logging=disabled
ifadd brname=bridge intf=ethport3 dest=ethif3 logging=disabled
ifadd brname=bridge intf=ethport4 dest=ethif4 logging=disabled
ifadd brname=bridge intf=virt dest=ethif6 logging=disabled
ifadd brname=bridge intf=WLAN dest=wlif1 logging=disabled
ifadd brname=bridge intf=VDSL2 dest=efmif1 logging=disabled
ifconfig brname=bridge intf=ethport1 wan=disabled logging=disabled
ifconfig brname=bridge intf=ethport2 wan=disabled logging=disabled
ifconfig brname=bridge intf=ethport3 wan=disabled logging=disabled
ifconfig brname=bridge intf=ethport4 wan=disabled logging=disabled
ifconfig brname=bridge intf=virt wan=disabled logging=disabled
ifconfig brname=bridge intf=WLAN wan=disabled logging=disabled
ifconfig brname=bridge intf=VDSL2 wan=enabled logging=disabled
ifattach brname=bridge intf=ethport2 logging=disabled
ifattach brname=bridge intf=ethport3 logging=disabled
ifattach brname=bridge intf=ethport4 logging=disabled
ifattach brname=bridge intf=virt logging=disabled
ifattach brname=bridge intf=WLAN logging=disabled
ifattach brname=bridge intf=VDSL2 logging=disabled
igmpsnooping config state disabled
config brname=bridge age=300 filter=none vlan=enabled
ippriomap brname=bridge type=tos tostable=Default precedencemap=4,7,9,11,13,14,15,15
ippriomap brname=bridge type=tos tostable=MinimizeDelay precedencemap=4,7,9,11,13,14,15,15
ippriomap brname=bridge type=tos tostable=MaximizeThroughput precedencemap=4,7,9,11,13,14,15,15
ippriomap brname=bridge type=tos tostable=MaximizeReliability precedencemap=4,7,9,11,13,14,15,15
ippriomap brname=bridge type=tos tostable=MinimizeCost precedencemap=4,7,9,11,13,14,15,15
ippriomap brname=bridge type=dscp dscpidx=dscp_0_7 precedencemap=4,4,4,4,4,4,4,4
ippriomap brname=bridge type=dscp dscpidx=dscp_8_15 precedencemap=7,7,7,7,6,6,6,6
ippriomap brname=bridge type=dscp dscpidx=dscp_16_23 precedencemap=9,9,9,9,8,8,8,8
ippriomap brname=bridge type=dscp dscpidx=dscp_24_31 precedencemap=11,11,11,11,10,10,10,10
ippriomap brname=bridge type=dscp dscpidx=dscp_32_39 precedencemap=13,13,13,13,12,12,12,12
ippriomap brname=bridge type=dscp dscpidx=dscp_40_47 precedencemap=14,14,14,14,14,14,14,14
ippriomap brname=bridge type=dscp dscpidx=dscp_48_55 precedencemap=15,15,15,15,15,15,15,15
ippriomap brname=bridge type=dscp dscpidx=dscp_56_63 precedencemap=15,15,15,15,15,15,15,15
[ vlanbridge.ini ]
ifadd name=WAN intf=VDSL2
ifadd name=Internet_vdsl intf=OBC untagged=disabled
ifadd name=Internet_vdsl intf=VDSL2 untagged=disabled
[ bridgevlan.ini ]
ifconfig brname=bridge intf=VDSL2 vlan=WAN
[ vlanbridge_del.ini ]
ifdelete name=default intf=VDSL2
[ igmpsnooping.ini ]
config brname=bridge state=enabled
[ eth.ini ]
device ifautoneg intf=ethif5 pause=both
ifadd intf=ETH_Internet_vdsl
ifconfig intf=ETH_Internet_vdsl dest=bridge vlan=Internet_vdsl
ifattach intf=ETH_Internet_vdsl
ifconfig intf=ETH_Internet_vdsl wan=enabled priotag=disabled
[ ppp.ini ]
ifadd intf=Internet
rtadd intf=Internet dst=0.0.0.0/0 src=0.0.0.0/0 metric=10
ifconfig intf=Internet dest=ETH_Internet_vdsl
ifconfig intf=Internet user=$ST_PPP_USER password=$%ST_PPP_PASSWORD
ifconfig intf=Internet class=15 accomp=enabled pool=spoofpool format=none echo=10 mru=1492 doddelay=120 dnsmetric=10 idletime=0 restart=enabled
ifattach intf=Internet
[ dnss.ini ]
config domain=lan timeout=15 suppress=0 state=enabled trace=disabled syslog=disabled WANDownSpoofing=enabled WDSpoofedIP=198.18.1.0
host add name=speedtouch addr=0.0.0.0 ttl=1200
host add name=dsldevice addr=0.0.0.0 ttl=1200
[ cwmp.ini ]
config state=disabled
server config url="" username="" password=\"\"
[ nat.ini ]
ifconfig intf=Internet translation=disabled
ifconfig intf=LocalNetwork translation=transparent
[ system.ini ]
settime timezone=$TZ daylightsaving=$DST
config upnp=disabled mdap=enabled resetbutton=enabled
config digestauth=enabled defaultconnection=Internet
config autosave=enabled autosavedelay=30
config WANMode=VDSL WANEthPort=""
locale dec_symbol=, group_symbol=. date_separator=- date_format=ddmmyyyy time_format=iso datetime_format=date+time duration_format=dhmmss
[ dsd.ini ]
intercept config WDSpoofedIP=198.18.1.1 servertimeout=10 connecterrorurl=/cgi/b/ic/connect/ categoryerrorurl=/cgi/b/ic/connect/ monitorintercepturl=/cgi/b/ic/connect/ unauthorizedrequrl=/cgi/b/ic/blocked/ imageredirect=enabled imageredirecturl=/images/spacer.gif alwaysuseip=disabled
urlfilter config state=disabled blockproxy=disabled blockipaddress=disabled blockobscuredip=disabled defaultaction=accept
syslog config syslog=unauthorized
debug config turbomode=disabled
debug proxy state=disabled dest=0.0.0.0 port=0
debug recycling state=enabled interval=5 httpidle=1 otheridle=12
config state=disabled
[ wansensing.ini ]
[ mlpuser.ini ]
#if $%ST_SYS_PASSWORD=""
add name=$%ST_SYS_USERID password="" role=Administrator defuser=enabled
#else
add name=$%ST_SYS_USERID password=$%ST_SYS_PASSWORD role=Administrator defuser=enabled
#endif
#if $%TG_SYS_PASSWORD=""
#else
add name=$%TG_SYS_USERID password=$%TG_SYS_PASSWORD role=$TG_SYS_ROLE
#endif
add name=tech password=$_PROD_SERIAL_NBR role=TechnicalSupport defremadmin=enabled
config name=tech password=$__SEC_MODEM_ACCESS_CODE
[ tls.ini ]
acs-client config state=disabled auth-serv=enabled valid-date=disabled valid-domain=disabled
https-server config state=enabled auth-client=disabled valid-date=disabled valid-domain=disabled
[ servmgr.ini ]
ifadd name=PPTP group=lan
ifadd name=HTTP group=lan
ifadd name=HTTPs group=lan
ifadd name=FTP group=lan
ifadd name=TELNET group=lan
ifadd name=DNS-S group=lan
ifadd name=SNMP_AGENT group=lan
ifadd name=SSDP group=lan
ifadd name=MDAP group=lan
ifadd name=PING_RESPONDER group=lan
modify name=PPTP state=enabled
modify name=DNS-C state=enabled
modify name=SNTP state=enabled
modify name=HTTP state=enabled
modify name=HTTPs state=enabled
modify name=WEBF state=disabled
modify name=TFTP-C state=disabled
modify name=FTP state=enabled
modify name=TELNET state=enabled
modify name=RIP state=disabled
modify name=IGMP-Proxy state=disabled
modify name=DNS-S state=enabled
modify name=DHCP-S state=enabled
modify name=SNMP_AGENT state=disabled
modify name=SSDP state=enabled
modify name=MDAP state=enabled
modify name=CWMP_client state=disabled
modify name=CWMP_server state=disabled
modify name=VOIP_SIP state=disabled
modify name=IP_COMMANDS state=enabled
modify name=PING_RESPONDER state=enabled
mapadd name=HTTP port=www-http
mapadd name=HTTPs port=443
mapadd name=HTTPI intf=LocalNetwork port=www-http
mapadd name=HTTPI intf=LocalNetwork port=1080
mapadd name=HTTPI intf=LocalNetwork port=httpproxy
mapadd name=FTP port=ftp
mapadd name=TELNET port=telnet
mapadd name=DNS-S port=dns
mapadd name=SNMP_AGENT port=snmp
mapadd name=SSDP port=1900
mapadd name=MDAP port=3235
[ language.ini ]
langdef lang=nl charset=ISO8859-1
t r="1, Overal"
t r="2, VDSL-NL"
t r="3, PPPoE over VDSL, spoofing. Dit is geschikt voor Nederland (VID = 6)."
t r="4, PPPoE over VDSL, spoofing - NL"
t r="9, Specificeer de gegevens van uw Internetaccount. Alle informatie wordt door uw ISP verstrekt."
t r="10, Instellingen Internetaccount"
t r="11, Gebruikersnaam"
t r="12, Voer de gebruikersnaam voor uw Internetverbinding in."
t r="13, Wachtwoord"
t r="14, Voer het wachtwoord voor uw Internetverbinding in."
t r="15, Wachtwoord bevestigen"
t r="16, Voer uw wachtwoord nog eens in."
t r="17, Specificeer een gebruikersnaam en wachtwoord, zodat onbevoegden geen toegang krijgen tot de managementinterface van de Thomson Gateway."
t r="18, Toegangscontrole"
t r="19, Gebruikersnaam"
t r="20, Voer een gebruikersnaam in."
t r="21, Wachtwoord"
t r="22, Voer een wachtwoord in."
t r="23, Wachtwoord bevestigen"
t r="24, Voer uw wachtwoord nog eens in."
t r="30, Geef het type draadloze <b>Network Name</ b>, <b>Security Type</ b> en <b>WPA vooraf gedeelde sleutel</ b>. Het etiket op de onderkant van de router gegevens van de Security Key te gebruiken met WEP-beveiliging."
t r="31, Draadloze beveiliging"
t r="32, Draadloos (SSID)"
t r="33, Geef de gewenste naam van het netwerk."
t r="34, Type beveiliging"
t r="35, 'Gehandicapten (onbeveiligd) Rode WLAN-lampje','WEP (64 bit HEX Key) Oranje WLAN-lampje','WPA+WPA2 (vooraf gedeelde sleutel) LED Groen WLAN'"
t r="36, WPA+WPA2 vooraf gedeelde sleutel"
t r="37, (alleen gebruikt als WPA+WPA2 is gekozen hierboven.)"
t r="38, <b>Opmerking</ b> WPA+WPA2 Keys zijn <b>HoOfdLeTteRgeVoEliG</ b>. Zorg ervoor dat u de gegevens correct invoerd bij het configureren van uw draadloze client."
t r="63, Geef een extra gebruikersnaam en wachtwoord om toegang te krijgen van ofwel LAN of WAN naar de Thomson Gateway Management Interface geven. Te negeren, niets invullen en klik op 'Volgende'."
t r="64, Geef uw draadloze Locale."
t r="65, Wireless-Locale"
t r="66, Dit is het laatste scherm. Wanneer u op 'Volgende' drukt, zal uw router worden ingesteld met alle opties die u hebt gekozen. Als u op 'Cancel' drukt, blijft uw router configuratie ongewijzigd."
t r="100, Geef uw geografische locatie. Dit zal worden gebruikt om uw locatie in te stellen op de juiste lokale datum en tijd binnen de Gateway van een nabijgelegen NTP-server."
t r="101, Datum, tijd + Geolocation"
t r="102, Kies uw continent uit deze lijst van NTP-servers"
t r="103, Kies uw tijdzone (UTC)"
t r="104, 'Zomertijd UIT','Zomertijd AAN'"
langdef lang=fr charset=ISO8859-1
t r="1, Un quelconque"
t r="2, VDSL-NL"
t r="3, PPPoE dans VDSL, spoofing. Ceci est approprié pour les Pays-Bas (VID = 6)."
t r="4, PPPoE dans VDSL, spoofing - NL"
t r="9, Spécifiez les détails relatifs à votre compte Internet. Toutes ces informations doivent être fournies par votre fournisseur de services."
t r="10, Paramètres du compte Internet"
t r="11, Nom d'utilisateur"
t r="12, Entrez le nom d'utilisateur employé pour votre connexion à Internet."
t r="13, Mot de passe"
t r="14, Entrez le mot de passe employé pour votre connexion à Internet."
t r="15, Confirmer le mot de passe"
t r="16, Entrez à nouveau le mot de passe."
t r="17, Entrez le nom d'utilisateur et le mot de passe afin d'empêcher l'accès non désiré à l'interface de gestion de votre Thomson Gateway."
t r="18, Contrôle d'accès"
t r="19, Nom d'utilisateur"
t r="20, Entrez un nom d'utilisateur."
t r="21, Mot de passe"
t r="22, Entrez un mot de passe."
t r="23, Confirmer le mot de passe"
t r="24, Entrez à nouveau le mot de passe."
t r="30, Préciser le type de réseau sans fil <b>Nom</ b>, <b>Type de sécurité</ b> et <b>clé pré-partagée WPA</ b>. L'étiquette sur le fond des détails routeur la clé de sécurité à utiliser avec la sécurité WEP."
t r="31, Sécurité sans fil"
t r="32, Nom sans fil (SSID)"
t r="33, Entrez votre nom de réseau désiré."
t r="34, Type de sécurité"
t r="35, 'Désactivé (non sécurisé) WLAN LED rouge','WEP (64 bits HEX Key) WLAN LED orange','WPA+WPA2 (clé pré-partagée) WLAN LED verte'"
t r="36, WPA + WPA2 clé pré-partagée"
t r="37, (utilisée uniquement si WPA + WPA2 est choisi ci-dessus.)"
t r="38, <b>Remarque</ b> WPA+WPA2 Keys sont <b>SenSiBlE</ b>. Assurez-vous d'entrer correctement les informations lors de la configuration de votre client sans fil."
t r="63, Indiquez un nom d'utilisateur et mot de passe supplémentaire pour donner l'accès des deux LAN ou WAN à l'interface de gestion Passerelle Thomson. Pour ignorer ce, n'entrez rien et cliquez sur «Suivant»."
t r="64, Précisez vos paramètres régionaux sans fil."
t r="65, Wireless Locale"
t r="66, Ceci est le dernier écran. Lorsque vous appuyez sur «Suivant», votre routeur sera configuré avec toutes les options que vous avez choisi. Si vous appuyez sur «Annuler», la configuration de votre routeur restera inchangée."
t r="100, Indiquez votre emplacement géographique. Ce sera utilisée pour établir et maintenir la bonne date et l'heure locale au sein de la passerelle à partir d'un serveur NTP à proximité."
t r="101, Date, heure + Géolocalisation"
t r="102, Choisissez votre continent à partir de cette liste de serveurs NTP"
t r="103, Choisissez votre fuseau horaire (UTC)"
t r="104, 'Heure d'été ARRÊT','Heure d'été ON'"
langdef lang=es charset=ISO8859-1
t r="1, Cualquiera"
t r="2, VDSL-NL"
t r="3, PPPoE a través de VDSL, spoofing. Esto es conveniente para los Países Bajos (VID = 6)."
t r="4, PPPoE a través de VDSL, spoofing - NL"
t r="9, Especifique los detalles de la cuenta de Internet. Toda la información debe proporcionarla el ISP."
t r="10, Configuración de la cuenta de Internet"
t r="11, Nombre de usuario"
t r="12, Escriba el nombre de usuario de conexión a Internet."
t r="13, Contraseña"
t r="14, Escriba la contraseña de conexión a Internet."
t r="15, Confirme la contraseña"
t r="16, Vuelva a escribir la contraseña."
t r="17, Especifique el nombre de usuario y la contraseña para evitar el acceso no deseado a la interfaz de administración del Thomson Gateway."
t r="18, Control de acceso"
t r="19, Nombre de usuario"
t r="20, Escriba un nombre de usuario."
t r="21, Contraseña"
t r="22, Escriba una contraseña."
t r="23, Confirme la contraseña"
t r="24, Vuelva a escribir la contraseña."
t r="30, Especificar el tipo de <b>nombre de red</ b> inalámbrica, <b>Tipo de seguridad</ b> y <b>clave previamente compartida WPA</ b>. La etiqueta en la parte inferior de los detalles del router la clave de seguridad para utilizar con seguridad WEP."
t r="31, Seguridad inalámbrica"
t r="32, Nombre inalámbrica (SSID)"
t r="33, Introduzca el nombre que quieras de la red."
t r="34, Tipo de seguridad"
t r="35, 'personas de movilidad reducida (no seguro) WLAN LED rojo','WEP (64 bits clave HEX) WLAN LED naranja','WPA+WPA2 (clave previamente compartida) WLAN LED verde'"
t r="36, WPA+WPA2 clave previamente compartida"
t r="37, (sólo se utiliza si WPA+WPA2 es elegido anteriormente.)"
t r="38, <b>Nota</ b> WPA+WPA2 claves son <b>eN cAsO sEnSiBlE</ b>. Asegúrese de introducir la información correcta al configurar su cliente inalámbrico."
t r="63, Especifique un nombre de usuario y una contraseña adicional para permitir el acceso desde cualquier red LAN o WAN a la interfaz de gestión de Puerta de enlace Thomson. Hacer caso omiso de esto, entre nada y haga clic en 'Siguiente'."
t r="64, Especificar la configuración regional Wireless."
t r="65, Inalámbrico de configuración regional"
t r="66, Esta es la última pantalla. Cuando se pulsa en 'Siguiente', el router se puede configurar con todas las opciones que usted ha elegido. Si pulsa 'Cancelar', la configuración del router se mantendrán sin cambios."
t r="100, Especifique su ubicación geográfica. Esto se utiliza para establecer y mantener la fecha y la hora local correcta dentro de la puerta de enlace de un servidor NTP cercana."
t r="101, Fecha, Hora + Geolocalización"
t r="102, Elija su continente a partir de esta lista de servidores NTP"
t r="103, Elija su zona horaria (UTC)"
t r="104, 'Horario de verano APAGADO','horario de verano EN'"
langdef lang=sv charset=ISO8859-1
t r="1, Valfri"
t r="2, VDSL-NL"
t r="3, PPPoE över VDSL, spoofing. Detta passar för Nederländerna (VID = 6)."
t r="4, PPPoE över VDSL, spoofing - NL"
t r="9, Ange uppgifter för Internet-kontot. Din ISP ska kunna ge all information."
t r="10, Inställningar för Internet-konto"
t r="11, Användarnamn"
t r="12, Ange användarnamn för Internet-anslutningen."
t r="13, Lösenord"
t r="14, Ange lösenord för Internet-anslutningen."
t r="15, Bekräfta lösenord"
t r="16, Skriv lösenordet igen."
t r="17, Ange användarnamn och lösenord för att förhindra obehörig åtkomst till hanteringsgränssnittet på din Thomson-gateway."
t r="18, AC (Access Control)"
t r="19, Användarnamn"
t r="20, Ange ett användarnamn."
t r="21, Lösenord"
t r="22, Ange ett lösenord."
t r="23, Bekräfta lösenord"
t r="24, Skriv lösenordet igen."
t r="30, Ange vilken typ av trådlös <b>Network Name</ b>, <b>Säkerhet</ b> och <b>WPA i förväg delad nyckel</ b>. Etiketten på undersidan av routern detaljer säkerhetsnyckeln att använda med WEP-säkerhet."
t r="31, Trådlös säkerhet"
t r="32, Trådlös (SSID)"
t r="33, Ange önskat nätverksnamn."
t r="34, Säkerhet Typ"
t r="35, 'funktionshindrade (osäkert) Röd WLAN-lampan','WEP (64 bitars HEX Key) Orange WLAN-lampan','WPA+WPA2 (i förväg delad nyckel) Grön LED WLAN'"
t r="36, WPA+WPA2 förväg delad nyckel"
t r="37, (endast användas om WPA+WPA2 är vald ovan.)"
t r="38, <b>Obs</ b> WPA+WPA2 Keys är <b>sMå BoKsTävEr</ b>. Se till att du anger informationen korrekt när du konfigurerar din trådlösa klient."
t r="63, Ange ett extra användarnamn och lösenord för att ge åtkomst från antingen LAN eller WAN till Thomson Gateway administrationsgränssnittet. Att bortse från detta, skriv ingenting och klicka på 'Nästa'."
t r="64, Ange ditt trådlösa Locale."
t r="65, Trådlös Locale"
t r="66, Detta är den sista skärmen. När du trycker på 'Nästa', kommer routern ställas in med alla de alternativ som du har valt. Om du trycker på 'Avbryt', kommer din router konfiguration förblir oförändrade."
t r="100, Ange ditt geografiska område. Detta kommer att användas för att upprätta och hålla rätt lokal tid och datum i Gateway från en närliggande NTP-server."
t r="101, Datum, tid + Geolocation"
t r="102, Välj kontinenten från den här listan över NTP-servrar"
t r="103, Välj din tidszon (UTC)"
t r="104, 'Sommartid AV','Sommartid PÅ'"
langdef lang=pt charset=ISO8859-1
t r="1, Qualquer"
t r="2, VDSL-NL"
t r="3, PPPoE em VDSL, spoofing. Isso é adequado para a Holanda (VID = 6)."
t r="4, PPPoE em VDSL, spoofing - NL"
t r="9, Especifique os detalhes da sua conta na Internet. Todas as informações devem ser fornecidas pelo seu provedor de serviços de Internet."
t r="10, Configurações da conta na Internet"
t r="11, Nome de usuário"
t r="12, Digite seu nome de usuário de conexão com a Internet."
t r="13, Senha"
t r="14, Digite sua senha de conexão com a Internet."
t r="15, Confirme a senha"
t r="16, Digite novamente sua senha."
t r="17, Especifique nome de usuário e senha para impedir acesso indesejado à interface de gerenciamento do Thomson Gateway."
t r="18, Controle de acesso"
t r="19, Nome de usuário"
t r="20, Digite um nome de usuário."
t r="21, Senha"
t r="22, Digite uma senha."
t r="23, Confirme a senha"
t r="24, Digite novamente a senha."
t r="30, Especifique o tipo de wireless <b>Nome Rede</ b>, <b>Tipo de segurança</ b> e <b>pré-compartilhada WPA Key</ b>. A etiqueta na parte inferior dos detalhes router a chave de segurança para usar com segurança WEP."
t r="31, Segurança sem fio"
t r="32, Wireless Name (SSID)"
t r="33, Digite o nome da rede desejada."
t r="34, Tipo de segurança"
t r="35, 'Deficientes (insegura) WLAN LED vermelho','WEP (64 bits da chave de hex) WLAN LED laranja','WPA+WPA2 (chave pré-compartilhada) WLAN LED verde'"
t r="36, WPA+WPA2 chave pré-compartilhada"
t r="37, (usado somente se WPA+WPA2 é escolhido acima.)"
t r="38, <b>Nota</ b> WPA+WPA2 Keys são <b>CaSe sEnSiTiVe</ b>. Certifique-se de digitar as informações corretamente ao configurar o seu cliente sem fio."
t r="63, Especifique um nome de usuário e senha extra para dar acesso de LAN ou WAN para a interface de gerenciamento do Thomson Gateway. Para ignorar isso, digite nada e clique em 'Avançar'."
t r="64, Especificar sua localidade Wireless."
t r="65, Local sem fio"
t r="66, Esta é a última tela. Quando você pressiona 'Next', o seu router será configurado com todas as opções que você escolheu. Se você pressionar 'Cancelar', a configuração do roteador permanecerá inalterada."
t r="100, Especificar sua localização geográfica. Isso será usado para estabelecer e manter a data correta ea hora local dentro do Gateway de um servidor NTP próximo."
t r="101, Data, Hora + Geolocation"
t r="102, Escolha o seu continente a partir desta lista de servidores NTP"
t r="103, Escolha o seu fuso horário (UTC)"
t r="104, 'Horário de Verão DESLIGADO','Horário de Verão'"
langdef lang=it charset=ISO8859-1
t r="1, Qualunque"
t r="2, VDSL-NL"
t r="3, PPPoE su VDSL, spoofing. Questo è adatto per i Paesi Bassi (VID = 6)."
t r="4, PPPoE su VDSL, spoofing - NL"
t r="9, Specificare i dettagli dell'account Internet. Tutte le informazioni devono essere fornite dal provider di servizi Internet."
t r="10, Impostazioni account Internet"
t r="11, Nome utente"
t r="12, Inserire il nome utente di connessione a Internet."
t r="13, Password"
t r="14, Inserire la password di connessione a Internet."
t r="15, Conferma password"
t r="16, Inserire di nuovo la password."
t r="17, Specificare nome utente e password per impedire l'accesso non desiderato all'interfaccia di gestione di Thomson Gateway."
t r="18, Controllo accesso"
t r="19, Nome utente"
t r="20, Inserire un nome utente."
t r="21, Password"
t r="22, Inserire una password."
t r="23, Conferma password"
t r="24, Inserire nuovamente la password."
t r="30, Specificare il tipo di rete wireless <b>Nome</ b>, <b>Sicurezza Tipo</ b> e <b>WPA con chiave già condivisa</ b>. L'etichetta sul fondo dei dettagli router la chiave di sicurezza da utilizzare con sicurezza WEP."
t r="31, Wireless Security"
t r="32, Wireless Nome (SSID)"
t r="33, Inserisci il tuo nome rete desiderata."
t r="34, Tipo di protezione"
t r="35, 'Disabilitato (non protetta) WLAN LED rosso','WEP (64 bit chiave esagonale) WLAN LED arancione','WPA+WPA2 (chiave già condivisa) WLAN LED verde'"
t r="36, WPA+WPA2 chiave già condivisa"
t r="37, (utilizzato solo se WPA+WPA2 viene scelto in precedenza.)"
t r="38, Nota <b> </ b> WPA + WPA2 tasti sono <b>sEnSiBiLi</ b>. Assicurarsi di inserire le informazioni in modo corretto quando la configurazione del client wireless."
t r="63, Specificare un nome utente e la password in più per dare accesso da LAN o WAN per l'interfaccia di gestione di Thomson Gateway. Per ignorare questo, entra niente e fare clic su 'Avanti'."
t r="64, Specifica il tuo Locale wireless."
t r="65, Wireless Locale"
t r="66, Questa è l'ultima schermata. Quando si preme 'Next', il vostro router sarà configurato con tutte le opzioni che avete scelto. Se si preme 'Annulla', la configurazione del router rimarranno invariati."
t r="100, Indicare la propria posizione geografica. Questo verrà utilizzato per stabilire e mantenere la data corretta e l'ora locale all'interno del Gateway da un server NTP vicino."
t r="101, Data, ora + Geolocation"
t r="102, Scegli il tuo continente da questa lista di server NTP"
t r="103, Scegli il tuo fuso orario (UTC)"
t r="104, 'Ora Legale OFF','Ora Legale ON'"
langdef lang=de charset=ISO8859-1
t r="1, Alle"
t r="2, VDSL-NL"
t r="3, PPPoE über VDSL, spoofing. Dies ist für die Niederlande (VID = 6)."
t r="4, PPPoE über VDSL, spoofing - NL"
t r="9, Geben Sie die Details zu Ihrem Internetkonto ein. Ihr Internetdienstanbieter kann Ihnen alle Informationen bereitstellen."
t r="10, Internetkontoeinstellungen"
t r="11, Benutzername"
t r="12, Geben Sie den Benutzernamen für die Internetverbindung ein."
t r="13, Kennwort"
t r="14, Geben Sie das Kennwort für die Internetverbindung ein."
t r="15, Kennwort bestätigen"
t r="16, Geben Sie das Kennwort erneut ein."
t r="17, Geben Sie den Benutzernamen und das Kennwort ein, mit denen der unbefugte Zugriff auf die Verwaltungsschnittstelle des Thomson Gateway verhindert werden soll."
t r="18, Zugangskontrolle"
t r="19, Benutzername"
t r="20, Geben Sie einen Benutzernamen ein."
t r="21, Kennwort"
t r="22, Geben Sie ein Kennwort ein."
t r="23, Kennwort bestätigen"
t r="24, Geben Sie das Kennwort erneut ein."
t r="30, Geben Sie die Art von Wireless <b>Network Name</ b>, <b>Sicherheit</ b> und <b>WPA Preshared Key</ b>. Das Etikett auf der Unterseite des Routers Details der Sicherheitsschlüssel, um mit WEP-Sicherheit verwenden."
t r="31, Wireless Security"
t r="32, Wireless Name (SSID)"
t r="33, Geben Sie den gewünschten Netzwerknamen."
t r="34, Sicherheitstyp"
t r="35, 'Behinderte (unsicheren) Red WLAN-LED','WEP (64 bit HEX Key) Orange WLAN-LED','WPA+WPA2 (Preshared Key) Green WLAN-LED'"
t r="36, WPA+WPA2 Preshared Key"
t r="37, (nur verwendet, wenn WPA+WPA2 oben gewählt wird.)"
t r="38, <b>Hinweis</ b> WPA+WPA2 Keys sind <b>gRoß-/kLeiNsChReiBuNg</ b>. Vergewissern Sie sich, geben Sie die Informationen korrekt bei der Konfiguration Ihres WLAN-Client."
t r="63, Geben Sie eine zusätzliche Benutzernamen und Passwort zum Zugang von beiden LAN oder WAN mit dem Thomson Gateway Management Interface. Dies zu ignorieren, geben Sie nichts ein und klicken Sie auf 'Weiter'."
t r="64, Geben Sie Ihren Wireless-Locale."
t r="65, Wireless-Locale"
t r="66, Dies ist die letzte Bildschirm. Wenn Sie auf 'Weiter' drücken, wird der Router-Setup mit allen Optionen, die Sie gewählt haben werden. Wenn Sie auf 'Abbrechen' drücken, wird der Router-Konfiguration bleibt unverändert."
t r="100, Geben Sie Ihren geographischen Standort. Dies wird verwendet, um Sie erstellt und führt die korrekte lokale Datum und die Uhrzeit im Gateway von einem NTP-Server in der Nähe sein."
t r="101, Datum, Zeit + Geolocation"
t r="102, Wählen Sie Ihren Kontinent aus dieser Liste von NTP-Server"
t r="103, Wählen Sie Ihre Zeitzone (UTC)"
t r="104, 'Sommerzeit OFF','Sommerzeit ON'"
[ endofarch ]
:strip_icc():strip_exif()/u/506130/keitjes.jpg?f=community)
/u/34216/avatar-60x60.png?f=community){kind=avatar}
Geen idee of Alcadis hier een gewijzigde of extra template in heeft gestopt, want qua bestandsgrootte is dit hetzelfde als van de Technicolor website.