Asus CUBX?

Pagina: 1
Acties:

  • oehoe
  • Registratie: Mei 2000
  • Laatst online: 28-08 16:52

oehoe

blije prutser, ouwe sok

Topicstarter
Ik wil eigenlijk binnenkort een ASUS CUBX aanschaffen, en de recensies bij Anandtech waren errug ok. Maar ik wil ff weten, heeft iemand hier al zo'n ding? En? Isset wat, of helemaal niet? Vast bedankt.

George Orwell considered some variations of 1984. All money should be marked so that anything could be traced back and men should be made to carry devices so that their position would be known. It seemed so unrealistic that he dropped these ideas..


Verwijderd

hij ziet er wel erug stoer uit, maar ik adviseer toch de Abit BE6-II, meer FSBtjes enz

  • oehoe
  • Registratie: Mei 2000
  • Laatst online: 28-08 16:52

oehoe

blije prutser, ouwe sok

Topicstarter
ja da's wel weer waar, hmmmm.... (keuzes, keuzes)

George Orwell considered some variations of 1984. All money should be marked so that anything could be traced back and men should be made to carry devices so that their position would be known. It seemed so unrealistic that he dropped these ideas..


  • Mex
  • Registratie: Maart 2000
  • Laatst online: 21:43

Mex

Mijn BE6-II is naar de haaien, kan nu kiezen tussen of een andere BE6-II of een m'n $$ terug. Ga liever voor de CUBX met een socket ipv slot. Slot is :( koelen. Ik wacht nog een weekje en dan ga ik waarschijnlijk voor de CUBX.

  • Gert
  • Registratie: Juni 1999
  • Laatst online: 05-12-2025
'k Heb em, en na enig gezeur ben ik er nu :D mee.

Je moet nl. als je de U66 controller wil gebruiken nadat je de drivers hebt geïnstalleerd, per schijf aangeven welke modus ze gebruiken, anders pakt hij nl voor alles piomode 0...en dat is l a n g z a a m. Verder stabiel als de andere asus borden, en als je het leuk vindt is die 5 USB poorten hub ook wel leuk.
Mijn c366 wou in mij oude p3b-f (de slot1 versie van de CUBX zegmaar) niet werken op 550, en met deze plank wel. Standaard cooler, 2,0v.

Verwijderd

de Asus CUV4X en P3V4X zijn ook hele goede opties, met name de P3V4X... ik ga deze binnenkort halen i.c.m. P3 600E

  • Rashann
  • Registratie: Maart 2000
  • Laatst online: 24-08 07:20

Rashann

Zoek de hond...

Ik heb dit bord niet zelf, maar laatst wel bij een vriend een systeem omheen gebouwd.... ik heb tot nu toe nog geen problemen gehoord, dus voor standaard gebruik issie zeker goed... maar ja, ik neem aan dat dat niet je bedoeling is, dat standaard ;) :)

If nothing is written below, I was the last to reply...


  • oehoe
  • Registratie: Mei 2000
  • Laatst online: 28-08 16:52

oehoe

blije prutser, ouwe sok

Topicstarter
thnx so far guyz...

Mex > idd . . .

RainManX > dat standaard is idd niet de bedoeling :)

Cronik > wat is dan het verschil tussen die CUV4X en de CUBX, slot/socket?

George Orwell considered some variations of 1984. All money should be marked so that anything could be traced back and men should be made to carry devices so that their position would be known. It seemed so unrealistic that he dropped these ideas..


Verwijderd

Het verschil ligt in de chip-set.. de CUVBX is een BX [Intel] chip set (de befaamde) en de CUV4X is een VIA chip set.

CUV4X:
is based on VIA® 694X/694Z AGPset which supports Intel® FCPGA 300~800MHz, AGP 4X/Pro, and UltraDMA/66 BM IDE. Also available in
P3V4X:
The ASUS P3V4X Mainboard is based on the VIA® Apollo Pro133A chipset with ATX form factor for the latest support in Intel Pentium® II/III

  • oehoe
  • Registratie: Mei 2000
  • Laatst online: 28-08 16:52

oehoe

blije prutser, ouwe sok

Topicstarter
Cronik > aah, of course

Nu even dit: ik ging laatst ff wat info checken (prijs e.d.) en een verkoper van de Vobis :( beweert glashard dat _alle_ ASUS mobo's teruggehaald gaan worden van de markt want "...wanteuh er zitteneuh foutje in". Vraag ik waar dan wel precies in " ja euh dat weet ik niet hoor, maareuh je moet ABIT hebben". Mooie zultkop, die vent. Ik bedoel als ik ABIT wil dan vraag ik daar wel om en als je geen ASUS levert kun je dat toch gewoon zeggen? Ok, ok, ik weet dat ik ook nooit bij de Vobis naar binnen had moeten gaan, maar ik kon gewoon mijn nieuwsgierigheid nit bedwingen ;)

George Orwell considered some variations of 1984. All money should be marked so that anything could be traced back and men should be made to carry devices so that their position would be known. It seemed so unrealistic that he dropped these ideas..


Verwijderd

Dat over het terug halen van Asus borden, kan wel kloppen. Echter ging het om borden die de i820 chip set heeft!

Ik zou nooit naar advies (als je dat nog mag noemen) van een vobis dealer luisteren.

Kijk/Luister hier op GOT!

Verwijderd

Niet alle 820 borden gaan terug, de p3c serie gaat niet terug en blijft gewoon in produktie
met rimm sockets

  • Gert
  • Registratie: Juni 1999
  • Laatst online: 05-12-2025
Een Vobis dealer praat alleen kletskoek. Moet je hem nadat hij een verhaaltje vertelt heeft eens vragen of hij die laatste zin nog even kan herhalen.

<h6>Dan is het fluister stil...</h6>

Oja, alleen de i820 borden met de brakke hub tussen Sd-ram en Rimm gaan terug, dus ook die van Intel, Supermicro,...Abit niet omdat zij er geen een hadden.

Verwijderd

Found it...
Dear valued customers:
We would like to make an important announcement regarding motherboards with
Intel ?s MTH (Memory Translator Hub). ASUS has just learned from Intel that the
MTH may cause systems to experience errors in the memory pathways caused by
the
MTH generating excessive noise.

We are making the following statements on this issue:
1. We will immediately stop shipment of MTH embedded motherboards
(P3C2000,
CUC2000, CUC2000-M). As soon as this issue is clarified and resolved by
Intel,
we will inform you of our long-term actions and solutions.

2. For all ASUS motherboards with MTH in your possession or in transit,
we
will take proper measures to recall them and make reimbursements to you.

3. For all ASUS motherboards with MTH that you have sold to your
customers
already, we will cooperate with Intel for proper treatment. The treatment
details will be disclosed to you as soon as they are finalized. Please
kindly
wait for our instructions.

We regret to cause you such inconvenience from this incident but we hope
that
you will cooperate with us to reduce the negative impacts to customers and
still
render the best service under this situation.

Thank you,
Pagina: 1