[Debian] Xen - USB printer windows client

[Centauriprime]

Hoi,

Ik zit met het volgende wat ik niet helemaal begrijp.

serv01:~# lsusb
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 015: ID 043d:000c Lexmark International, Inc. Optra E312 Printer
Bus 001 Device 014: ID 051d:0002 American Power Conversion Back-UPS Pro 500/1000/1500
Bus 001 Device 013: ID 04b8:083f Seiko Epson Corp.
Bus 001 Device 001: ID 0000:0000

Hier staan twee printers in de Dom0

Vul ik de Lexmark in in het opstart script voor de Windows client, dan werkt dat gewoon.

usb=1
usbdevice='host:043d:000c'

Doe ik dat met de Epson, dan werkt het niet??

usb=1
usbdevice='host:04b8:083f'

Zie ik wat over het hoofd? Als het voor de Lexmark werkt dan toch ook voor de Epson?

serv01:~# cat /proc/bus/usb/devices

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=10
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-xen0 ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:02.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10
B: Alloc= 3/900 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.18-xen0 ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:00:02.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 14 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=051d ProdID=0002 Rev= 0.06
S: Manufacturer=American Power Conversion
S: Product=Back-UPS CS 500 FW:808.q8.I USB FW:q8
S: SerialNumber=8B0703R14899
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 6 Ivl=100ms

T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 15 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=043d ProdID=000c Rev= 1.00
S: Manufacturer=Lexmark International, Inc.
S: Product=Lexmark Optra E312
S: SerialNumber=6190414
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms

T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 13 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04b8 ProdID=083f Rev= 0.01
S: Manufacturer=EPSON
S: Product=USB1.1 MFP(Full-Speed)
S: SerialNumber=B06110711091454027
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms


Bedankt.

[Centauriprime]

Niemand???