[X1950 Pro AGP] geen 1680x1050 onder linux

Pagina: 1
Acties:

  • Punkie
  • Registratie: Oktober 2005
  • Laatst online: 06-12-2025
De gebruikte distributie is PClinuxOS2007, ik denk afgeleid van mandriva. Hun helpforum heeft geen soelaas gebracht. Het relaas is hier te lezen.
http://www.pclinuxos.com/...f&Itemid=58&topic=28751.0

Het probleem:
Geen 1680x1050 resolutie.
Bij het scrollen doet ie 1 sec om het beeld te hertekenen. Dit zou te wijten zijn aan de slechte driver (Xorg > vesa) en komt niet voor bij ati > radeon (fglrx) drivers.

hardware:
athlon 64 3200+ clawhammer
1GB RAM
Saphire X1950 Pro AGP 512MB
SyncMaster 226bw resolution 1680x1050

Met de driver vendor > ati > radeon(vesa) haal ik 1280x1024. Ook met xorg > vesa. Op 1680x1050 werkt het echter niet goed. Er wordt dan een andere resolutie gebruikt en het beeld wordt geschaald.

Met behulp van de synaptics manager heb ik package dkms-ati_legacy geprobeerd.
Bij het kiezen van Vendor > ati > Radeon( fglrx) in XFdrake vraagt ie of je de proprietaire driver wilt gebruiken of niet
*antwoord no (no proprietary driver)
Niets werkt meer. XFdrake geeft:
code:
1
2
3
4
An error occurred:
(EE) No devices detected.

Try to change some parameters


*antwoord yes
op 1280x1024 werkt het
op 1680x1050: niks. De monitor wordt zwart en toont een een kader
code:
1
2
3
Not Optimum mode
Recommended mode :
1680x1050 60Hz

Dit komt van de monitor, dus niet van X.

Ook nog geprobeerd om de drivers van de site van ati te installeren. Herstart en het systeem wou enkel nog in single user mode werken. Deinstalleren dan maar.
Heb wel de xorg.conf bewaard:
code:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
# File generated by XFdrake (rev 57713)

# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************

Section "Files"
    # font server independent of the X server to render fonts.
    FontPath "unix/:-1"
    
    # minimal fonts to allow X to run without xfs
    FontPath "/usr/share/fonts/misc:unscaled"
EndSection

Section "Extensions"
    EndSection

Section "ServerFlags"
    #DontZap # disable <Crtl><Alt><BS> (server abort)
    AllowMouseOpenFail # allows the server to start up even if the mouse does not work
    #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection

Section "Module"
    Load "dbe" # Double-Buffering Extension
    Load "v4l" # Video for Linux
    Load "extmod"
    Load "type1"
    Load "freetype"
    Load "glx" # 3D layer
    Load "dri" # direct rendering
EndSection

Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us(alt-intl)"
    Option "XkbOptions" "compose:rwin"
EndSection

Section "InputDevice"
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "ExplorerPS/2"
    Option "Device" "/dev/mouse"
EndSection

Section "InputDevice"
    Identifier "Mouse2"
    Driver "evdev"
    Option "product" "0xc50e"
    Option "vendor" "0x046d"
    Option "HWheelRelativeAxisButtons" "7 6"
EndSection

Section "Monitor"
    Identifier "monitor1"
    VendorName "Plug'n Play"
    ModelName "SyncMaster"
    HorizSync 30-81
    VertRefresh 56-75
    
    # Monitor preferred modeline (59.9 Hz vsync, 64.7 kHz hsync, ratio 16/10)
    ModeLine "1680x1050" 119 1680 1728 1760 1840 1050 1053 1059 1080 -hsync +vsync
    
    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
    
    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1680x1050_120"  313.20  1680 1816 2000 2320  1050 1051 1054 1125  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1680x1050_100"  256.20  1680 1808 1992 2304  1050 1051 1054 1112  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1680x1050_85"  214.51  1680 1800 1984 2288  1050 1051 1054 1103  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1680x1050_75"  188.07  1680 1800 1984 2288  1050 1051 1054 1096  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1680x1050_60"  147.14  1680 1784 1968 2256  1050 1051 1054 1087  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1680x1050_50"  120.21  1680 1776 1952 2224  1050 1051 1054 1081  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x1000_120"  284.04  1600 1728 1904 2208  1000 1001 1004 1072  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x1000_100"  232.13  1600 1720 1896 2192  1000 1001 1004 1059  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x1000_85"  194.21  1600 1712 1888 2176  1000 1001 1004 1050  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x1000_75"  169.13  1600 1704 1880 2160  1000 1001 1004 1044  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x1000_60"  133.14  1600 1704 1872 2144  1000 1001 1004 1035  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1600x1000_50"  108.66  1600 1688 1856 2112  1000 1001 1004 1029  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_120"  229.75  1440 1552 1712 1984  900 901 904 965  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_100"  187.55  1440 1544 1704 1968  900 901 904 953  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_85"  156.79  1440 1536 1696 1952  900 901 904 945  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_75"  136.49  1440 1536 1688 1936  900 901 904 940  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_60"  106.47  1440 1520 1672 1904  900 901 904 932  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1440x900_50"  87.41  1440 1512 1664 1888  900 901 904 926  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_120"  181.21  1280 1376 1520 1760  800 801 804 858  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_100"  147.89  1280 1376 1512 1744  800 801 804 848  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_85"  123.38  1280 1368 1504 1728  800 801 804 840  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_75"  107.21  1280 1360 1496 1712  800 801 804 835  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_60"  83.46  1280 1344 1480 1680  800 801 804 828  -HSync +Vsync
    
    # modeline generated by gtf(1) [handled by XFdrake]
    ModeLine "1280x800_50"  68.56  1280 1336 1472 1664  800 801 804 824  -HSync +Vsync
EndSection

Section "Device"
    Identifier "device1"
    BoardName "ATI Radeon (fglrx)"
    Driver "fglrx"
    Option "DPMS"
    
    # === disable PnP Monitor  ===
    #Option                              "NoDDC"
    # === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
    # === FireGL DDX driver module specific settings ===
    # === Screen Management ===
    Option "DesktopSetup"               "0x00000000" 
    Option "MonitorLayout"              "AUTO, AUTO"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "unspecified" 
    Option "VRefresh2"                  "unspecified" 
    Option "ScreenOverlap"              "0" 
    # === TV-out Management ===
    Option "NoTV"                       "yes"     
    Option "TVStandard"                 "NTSC-M"     
    Option "TVHSizeAdj"                 "0"     
    Option "TVVSizeAdj"                 "0"     
    Option "TVHPosAdj"                  "0"     
    Option "TVVPosAdj"                  "0"     
    Option "TVHStartAdj"                "0"     
    Option "TVColorAdj"                 "0"     
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
    # === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
    # === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
    # === OpenGL Overlay ===
    # Note: When OpenGL Overlay is enabled, Video Overlay
    #       will be disabled automatically
    Option "OpenGLOverlay"              "off"
    Option "CenterMode"                 "off"
    # === QBS Support ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
    # === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "no"
    Option "ForceGenericCPU"            "no"
    # === FSAA ===
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
EndSection

Section "Screen"
    Identifier "screen1"
    Device "device1"
    Monitor "monitor1"
    DefaultColorDepth 24
    
    Subsection "Display"
        Depth 8
        Modes "1680x1050" "1600x1000" "1440x900" "1280x800"
    EndSubsection
    
    Subsection "Display"
        Depth 15
        Modes "1680x1050" "1600x1000" "1440x900" "1280x800"
    EndSubsection
    
    Subsection "Display"
        Depth 16
        Modes "1680x1050" "1600x1000" "1440x900" "1280x800"
    EndSubsection
    
    Subsection "Display"
        Depth 24
        Modes "1680x1050" "1600x1000" "1440x900" "1280x800"
    EndSubsection
EndSection

Section "ServerLayout"
    Identifier "layout1"
    InputDevice "Keyboard1" "CoreKeyboard"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Mouse2" "SendCoreEvents"
    Screen "screen1"
EndSection

  • Punkie
  • Registratie: Oktober 2005
  • Laatst online: 06-12-2025
Echt niemand die een suggestie heeft??

  • Ultraman
  • Registratie: Februari 2002
  • Laatst online: 31-01 00:14

Ultraman

Moderator Harde Waren

Boefje

Dit soort vragen komen om een of andere reden vaak bij NOS terecht. Als je wilt kan ik je vraag daar wel naar verplaatsen.

Ik heb even je xorg.conf door zitten kijken en ik zie dat je wel ModeLines gedefineerd hebt. Dat zou namelijk mijn eerste suggestie zijn. Maar ik zie ModeLines van 120Hz en dergelijke. Volgens mij gebruikt Xorg vaak de hoogste refreshrate die beschikbaar is. Het kan zijn dat het daar mis gaat en de monitor een dergelijk hoge refreshrate toegezonden krijgt dat deze daar niet mee wilt werken.
Heb je al die ModeLines zelf aangemaakt, al zei dat met utilities, of heeft de installatie van je distro dat gedaan? Als je dat zelf niet hebt gedaan zou ik eens voor de grap al die Modelines commenten zodat ze niet meer actief zijn op misschien de bovenste na.

Mocht de ATi driver zelf gebruik maken van DPMS en DDC om de eigenschappen van de monitor te bepalen dan zou je ook eens de DMPS kunnen commenten door
code:
1
# Option "DMPS"
te zetten en de optie
code:
1
Option "NoDDC"
in kunnen schakelen.
DMPS of DDC wordt geloof ik default al gebruikt door de ATi driver om de monitor te detecteren. Maar als je een ModeLine hebt is dat niet noodzakelijk. Door het uit te schakelen zou je dus misschien die een juiste ModeLine kunnen forceren.

Voordat je echter met je xorg.conf gaat klooien ben ik wel benieuwd naar de opties die de 'xrandr' app je biedt. Open dus eens een terminal in een X omgeving en bekijk eens de output van xrandr.
Staat daar wel een 1680x1050 resolutie bij? Post voor de compleetheid ook eens die output hier.

Mocht alles overigens geen baat hebben dan zou je ook zelf even een nieuwe xorg.conf aan kunnen maken. Maar daar kijken we later wel even naar.

[ Voor 5% gewijzigd door Ultraman op 01-08-2007 21:34 ]

Als je stil blijft staan, komt de hoek wel naar jou toe.


  • Punkie
  • Registratie: Oktober 2005
  • Laatst online: 06-12-2025
De xorg.conf bovenaan is gemaakt door XFdrake. Het beeldscherm word automatisch correct herkent bij installatie van de distro. Deze conf file was gemaakt door XFdrake *nadat* ik de drivers vanop de ati website had geinstallerd en vervolgens XFdrake vertelt deze driver te gebruiken met 1680x1050 24bit.

Deze driver liet het systeem niet meer goed werken (enkel nog single user mode) waarna ik de driver terug gedesinstalleerd heb.

Output van xrandr.
code:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
 SZ:    Pixels          Physical       Refresh
*0   1280 x 1024   ( 471mm x 302mm )  *75   70   60
 1   1152 x 864    ( 471mm x 302mm )   75   70   60
 2   1024 x 768    ( 471mm x 302mm )   75   72   70   60
 3    800 x 600    ( 471mm x 302mm )   75   72   70   60   56
 4    640 x 480    ( 471mm x 302mm )   75   72   60
 5    320 x 240    ( 471mm x 302mm )   60
 6   1280 x 720    ( 471mm x 302mm )   60
 7    768 x 576    ( 471mm x 302mm )   79   99
 8    720 x 480    ( 471mm x 302mm )   60
 9    640 x 432    ( 471mm x 302mm )   60
 10   640 x 400    ( 471mm x 302mm )   60
 11   512 x 384    ( 471mm x 302mm )   60
 12   400 x 300    ( 471mm x 302mm )   60
 13   320 x 200    ( 471mm x 302mm )   60
Current rotation - normal
Current reflection - none
Rotations possible - normal
Reflections possible - none

Let wel! Deze output is genomen met de ati > radeon(fglrx) drivers vanuit het dkms-ati package. Dus NIET dezelde als waarvoor de conf file werd geschreven!
Maximum resolutie in de output hier is 1280x1024 en dat is dan ook de resolutie waarop het staat ingesteld, op 75Hz.


PS indien het op NOS beter staat, mag het gerust verplaatst worden. Met dank.

  • Ultraman
  • Registratie: Februari 2002
  • Laatst online: 31-01 00:14

Ultraman

Moderator Harde Waren

Boefje

Hmm, als ik me niet vergis heeft die ATi fglrx driver zelf een Xorg configuratie utility. Daarmee heb ik zelf een keer op een PC met een recentere Radeon geworsteld om de juiste resoluties er in te beuken. Dat werkte toen na 2 keer prutsen, maar is al een tijdje geleden en het exacte ben ik dus even kwijt.
Bekijk eens de readme files en driver documentatie, daar zullen vast wel vermeldingen in staan over dat soort dingen. En zoek ook zeker het forum door van je distro, omdat deze afgeleid lijkt te zijn van Mandrake/Mandriva zou ik ook daar eens gaan snuffelen.

Ik gooi deze even naar NOS omdat daar wat meer kans is op de juiste hulp dan in VB.

[ Voor 15% gewijzigd door Ultraman op 02-08-2007 15:20 ]

Als je stil blijft staan, komt de hoek wel naar jou toe.


  • Punkie
  • Registratie: Oktober 2005
  • Laatst online: 06-12-2025
De informatie van xrandr is afgeleid van wat de driver aankan? Of eerder van de huidige instellingen?
Onderstaand is een testverslag. Ik heb bij alle drivers de standaard instellingen geprobeerd op 1680x1050 en some ook 1280x1024. De xorg.conf wordt daarbij angepast door een kde achtige gui van XFdrake. Daarnaast heb ik bij elke driver de xorg.conf met de hand gemodifieerd om de juiste resoluties in de conf file te krijgen.

Met de org > vesa driver kan ik1680x1050 instellen maar dan verzet hij dat zelf naar 1600x1200.
xrandr
code:
1
2
3
4
5
6
7
8
9
10
11
12
 SZ:    Pixels          Physical       Refresh
*0   1600 x 1200   ( 473mm x 302mm )  *66
 1   1400 x 1050   ( 473mm x 302mm )   75
 2   1280 x 1024   ( 473mm x 302mm )   76
 3   1152 x 864    ( 473mm x 302mm )   76
 4   1024 x 768    ( 473mm x 302mm )   76
 5    800 x 600    ( 473mm x 302mm )   73
 6    640 x 480    ( 473mm x 302mm )   73
Current rotation - normal
Current reflection - none
Rotations possible - normal
Reflections possible - none


xorg > ati
(EE) No devices detected.


vendor > ati > radeon
(EE) No devices detected.

vendor > ati > fglrx > no (no proprietary driver)
(EE) No devices detected.

vendor > ati > fglrx > yes (proprietary driver)
not optimum mode
1280x1024 werkt
1680x105 niet en geeft de xorg.conf
code:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
Section "Device"
    Identifier "device1"
    BoardName "ATI Radeon (fglrx)"
    Driver "fglrx"
    Option "DPMS"
    
    # === disable PnP Monitor  ===
    #Option                              "NoDDC"
    # === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
    # === FireGL DDX driver module specific settings ===
    # === Screen Management ===
    Option "DesktopSetup"               "0x00000000" 
    Option "MonitorLayout"              "AUTO, AUTO"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "unspecified" 
    Option "VRefresh2"                  "unspecified" 
    Option "ScreenOverlap"              "0" 
    # === TV-out Management ===
    Option "NoTV"                       "yes"     
    Option "TVStandard"                 "NTSC-M"     
    Option "TVHSizeAdj"                 "0"     
    Option "TVVSizeAdj"                 "0"     
    Option "TVHPosAdj"                  "0"     
    Option "TVVPosAdj"                  "0"     
    Option "TVHStartAdj"                "0"     
    Option "TVColorAdj"                 "0"     
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
    # === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
    # === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
    # === OpenGL Overlay ===
    # Note: When OpenGL Overlay is enabled, Video Overlay
    #       will be disabled automatically
    Option "OpenGLOverlay"              "off"
    Option "CenterMode"                 "off"
    # === QBS Support ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
    # === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "no"
    Option "ForceGenericCPU"            "no"
    # === FSAA ===
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
EndSection


Ook nog geprobeerd om alles op de juiste reslties te zetten en DPMS af en NODDC op te zetten.
Geen success, steeds weer het scherm dat niets wil tonen buiten
code:
1
2
3
Not Optimum mode
Recommended mode :
1680x1050 60Hz


Das alles na enkele uren zwoegen. Ik heb nog enkele drivers te gaan welke ik morgen probeer.

  • Punkie
  • Registratie: Oktober 2005
  • Laatst online: 06-12-2025
Ik denk dat ik al iets verder ben. Het package dkms-ait_legacy geinstalleerd. Bij initialisatie van de driver vermeld ie
code:
1
2
(EE) fglrx(0): Chipset 0x7280 is not recognized
(EE) fglrx(0): PreInitConfig failed

Heb x herstart en heb (je leert elke dag bij) een logfile ervan gevonden in /var/log/
Daarin staat
code:
1
2
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x7280) rev 154, Mem @ 0xd0000000/28, 0xff3f0000/16, I/O @ 0x9800/8, BIOS @ 0xff3c0000/17
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x72a0) rev 154, Mem @ 0xff3e0000/16


En nog wat verder:
code:
1
2
3
4
5
6
7
8
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.28.8
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.28g1                           
(II) ATI Proprietary Linux Driver Build Date: Aug 17 2006 09:28:12
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.28.1.1.2.3-driver-lnx-x86-x86_64-287161
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset (null) found



En nog wat verder:
code:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(EE) fglrx(0): Chipset 0x7280 is not recognized
(EE) fglrx(0): PreInitConfig failed
SetVBEMode failed
(EE) fglrx(0): R200PreInit failed
(II) fglrx(0): === [R200PreInit] === end
(II) UnloadModule: "fglrx"
(II) UnloadModule: "int10"
(II) Unloading /usr/lib/xorg/modules/libint10.so
(II) UnloadModule: "vgahw"
(II) Unloading /usr/lib/xorg/modules/libvgahw.so
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found


Er stond ook nog een epistel in over ATI Radeon/FireGL die een heelpak cipsets ondersteunt maar niet X1950.

  • Punkie
  • Registratie: Oktober 2005
  • Laatst online: 06-12-2025
Ik denk dat het uiteindelijk gelukt is. Een screenshot nemen toont mij uiteindelijk een resolutie van 1680x1050 en het ziet er ook scherper uit. Scrollen gaat zonder stoten. Indien je het screen shot hierbij gesloten bekijkt, zijn de grijze zones, vb bij de 'r' of de 'i' te wijten aan het herschalen van het beeld of aan anti aliasing?
Afbeeldingslocatie: http://users.pandora.be/zeverzever/1680x1050.png

Een hint aan andere mensen die met dezelfde problemen zitten:
  • /usr/share/ati bevat logs van de installatie
  • /var/log/ gevat logs van oa het starten van X.
  • het aticonfig tool doet niet altijd wat hij beweert te doen. check zelf de xorg.conf
  • verwijder andere drivers! klinkt raar maar deze packages lopen toch in de weg
  • wat XFdrake aangeeft als instellingen is niet altijd correct ivm de conf file
  • ati zet de composite optie aan. Afzetten!
Pagina: 1