Ik heb weer een leuke uitdaging gevonden, ik heb een nieuw mobo en ik probeer eea aan de gang te krijgen om een mediasysteem te bouwen.
Specs:
Epia EN15000 met CN700 chipset (Video drivers en DRM werken goed)
Fedora core5 met 2.6.18-1.2257 kernel
ik probeer nu een Hauppage PVR500 aan de praat te krijgen met de IVTV driver, dat is gedeeltelijk gelukt want op de 2e tuner (/dev/video1) kan ik beeld krijgen, dit loopt goed,
als ik echter probeer de 1e tuner te gebruiken krijg ik na een paar seconden de melding:
er word met mplayer zelfs geen window geopend
/var/log/messages:
En als ik probeer iets af te spelen met player van /dev/video1 krijg ik dit erbij:
Ik snap even niet waarom dit zo is
alle instellingen van de tuners zijn identiek verder.
Specs:
Epia EN15000 met CN700 chipset (Video drivers en DRM werken goed)
Fedora core5 met 2.6.18-1.2257 kernel
ik probeer nu een Hauppage PVR500 aan de praat te krijgen met de IVTV driver, dat is gedeeltelijk gelukt want op de 2e tuner (/dev/video1) kan ik beeld krijgen, dit loopt goed,
als ik echter probeer de 1e tuner te gebruiken krijg ik na een paar seconden de melding:
code:
1
| localhost kernel: Disabling IRG#153 |
er word met mplayer zelfs geen window geopend
/var/log/messages:
code:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
| Jan 7 14:57:59 localhost kernel: ivtv: ==================== START INIT IVTV ==================== Jan 7 14:57:59 localhost kernel: ivtv: version 0.8.2 (tagged release) loading Jan 7 14:57:59 localhost kernel: ivtv: Linux version: 2.6.18-1.2257.fc5 mod_unload 686 REGPARM 4KSTACKS gcc-4.1 Jan 7 14:57:59 localhost kernel: ivtv: In case of problems please include the debug info between Jan 7 14:57:59 localhost kernel: ivtv: the START INIT IVTV and END INIT IVTV lines, along with Jan 7 14:57:59 localhost kernel: ivtv: any module options, when mailing the ivtv-users mailinglist. Jan 7 14:57:59 localhost kernel: ivtv0: Autodetected Hauppauge card (cx23416 based) Jan 7 14:57:59 localhost kernel: ivtv0: Unreasonably low latency timer, setting to 64 (was 32) Jan 7 14:57:59 localhost kernel: USB Universal Host Controller Interface driver v3.0 Jan 7 14:57:59 localhost kernel: ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) Jan 7 14:57:59 localhost kernel: tveeprom 1-0050: Hauppauge model 23559, rev D491, serial# 9522423 Jan 7 14:57:59 localhost kernel: tveeprom 1-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) Jan 7 14:57:59 localhost kernel: tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) Jan 7 14:57:59 localhost kernel: tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) Jan 7 14:57:59 localhost kernel: tveeprom 1-0050: audio processor is CX25843 (idx 37) Jan 7 14:57:59 localhost kernel: tveeprom 1-0050: decoder processor is CX25843 (idx 30) Jan 7 14:57:59 localhost kernel: tveeprom 1-0050: has radio, has no IR remote Jan 7 14:57:59 localhost kernel: ivtv0: Autodetected WinTV PVR 500 (unit #1) Jan 7 14:57:59 localhost kernel: tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0) Jan 7 14:57:59 localhost kernel: tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner) Jan 7 14:57:59 localhost kernel: tuner 1-0060: TEA5767 detected. Jan 7 14:57:59 localhost kernel: tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0) Jan 7 14:57:59 localhost kernel: tuner 1-0060: type set to 62 (Philips TEA5767HN FM Radio) Jan 7 14:57:59 localhost kernel: tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) Jan 7 14:57:59 localhost kernel: cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) Jan 7 14:57:59 localhost kernel: cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes) Jan 7 14:57:59 localhost kernel: wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) Jan 7 14:57:59 localhost kernel: ivtv0: Encoder revision: 0x02050032 Jan 7 14:57:59 localhost kernel: ivtv0: Registered device video0 for encoder MPEG Jan 7 14:57:59 localhost kernel: ivtv0: Registered device video32 for encoder YUV Jan 7 14:57:59 localhost kernel: ivtv0: Registered device vbi0 for encoder VBI Jan 7 14:57:59 localhost kernel: ivtv0: Registered device video24 for encoder PCM audio Jan 7 14:57:59 localhost kernel: ivtv0: Registered device radio0 for encoder radio Jan 7 14:57:59 localhost kernel: tuner 1-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) Jan 7 14:57:59 localhost kernel: ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 Jan 7 14:57:59 localhost kernel: ivtv: ====================== NEXT CARD ====================== Jan 7 14:57:59 localhost kernel: ivtv1: Autodetected Hauppauge card (cx23416 based) Jan 7 14:57:59 localhost kernel: ivtv1: Unreasonably low latency timer, setting to 64 (was 32) Jan 7 14:57:59 localhost kernel: PCI: VIA IRQ fixup for 0000:00:10.0, from 5 to 1 Jan 7 14:57:59 localhost kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller Jan 7 14:57:59 localhost kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 Jan 7 14:57:59 localhost kernel: uhci_hcd 0000:00:10.0: irq 177, io base 0x0000d800 Jan 7 14:57:59 localhost kernel: usb usb1: configuration #1 chosen from 1 choice Jan 7 14:57:59 localhost kernel: hub 1-0:1.0: USB hub found Jan 7 14:57:59 localhost kernel: hub 1-0:1.0: 2 ports detected Jan 7 14:57:59 localhost kernel: PCI: VIA IRQ fixup for 0000:00:10.1, from 5 to 1 Jan 7 14:57:59 localhost kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller Jan 7 14:57:59 localhost kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 Jan 7 14:57:59 localhost kernel: uhci_hcd 0000:00:10.1: irq 177, io base 0x0000d400 Jan 7 14:57:59 localhost kernel: usb usb2: configuration #1 chosen from 1 choice Jan 7 14:57:59 localhost kernel: hub 2-0:1.0: USB hub found Jan 7 14:57:59 localhost kernel: hub 2-0:1.0: 2 ports detected Jan 7 14:57:59 localhost kernel: PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 1 Jan 7 14:57:59 localhost kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller Jan 7 14:57:59 localhost kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 Jan 7 14:57:59 localhost kernel: uhci_hcd 0000:00:10.2: irq 177, io base 0x0000d000 Jan 7 14:57:59 localhost kernel: usb usb3: configuration #1 chosen from 1 choice Jan 7 14:57:59 localhost kernel: hub 3-0:1.0: USB hub found Jan 7 14:57:59 localhost kernel: hub 3-0:1.0: 2 ports detected Jan 7 14:57:59 localhost kernel: ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) Jan 7 14:57:59 localhost kernel: usb 3-1: new low speed USB device using uhci_hcd and address 2 Jan 7 14:57:59 localhost kernel: usb 3-1: configuration #1 chosen from 1 choice Jan 7 14:57:59 localhost kernel: tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1) Jan 7 14:57:59 localhost kernel: tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner) Jan 7 14:57:59 localhost kernel: tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1) Jan 7 14:57:59 localhost kernel: input: GASIA USB JOYSTICK as /class/input/input3 Jan 7 14:57:59 localhost kernel: input: USB HID v1.10 Joystick [GASIA USB JOYSTICK] on usb-0000:00:10.2-1 Jan 7 14:57:59 localhost kernel: cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) Jan 7 14:57:59 localhost kernel: usb 3-2: new full speed USB device using uhci_hcd and address 3 Jan 7 14:57:59 localhost kernel: usb 3-2: configuration #1 chosen from 1 choice Jan 7 14:57:59 localhost kernel: Initializing USB Mass Storage driver... Jan 7 14:57:59 localhost kernel: scsi2 : SCSI emulation for USB Mass Storage devices Jan 7 14:57:59 localhost kernel: usbcore: registered new driver usb-storage Jan 7 14:57:59 localhost kernel: USB Mass Storage support registered. Jan 7 14:57:59 localhost kernel: cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes) Jan 7 14:57:59 localhost kernel: wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) Jan 7 14:57:59 localhost kernel: tveeprom 2-0050: Hauppauge model 23559, rev D491, serial# 9522423 Jan 7 14:57:59 localhost kernel: tveeprom 2-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56) Jan 7 14:57:59 localhost kernel: tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) Jan 7 14:57:59 localhost kernel: tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62) Jan 7 14:57:59 localhost kernel: tveeprom 2-0050: audio processor is CX25843 (idx 37) Jan 7 14:57:59 localhost kernel: tveeprom 2-0050: decoder processor is CX25843 (idx 30) Jan 7 14:57:59 localhost kernel: tveeprom 2-0050: has radio, has no IR remote Jan 7 14:57:59 localhost kernel: ivtv1: Correcting tveeprom data: no radio present on second unit Jan 7 14:57:59 localhost kernel: ivtv1: Autodetected WinTV PVR 500 (unit #2) Jan 7 14:57:59 localhost kernel: Vendor: Generic Model: USB SD Reader Rev: 1.00 Jan 7 14:57:59 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00 Jan 7 14:57:59 localhost kernel: sd 2:0:0:0: Attached scsi removable disk sda Jan 7 14:57:59 localhost kernel: Vendor: Generic Model: USB CF Reader Rev: 1.01 Jan 7 14:57:59 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00 Jan 7 14:57:59 localhost kernel: sd 2:0:0:1: Attached scsi removable disk sdb Jan 7 14:57:59 localhost kernel: Vendor: Generic Model: USB SM Reader Rev: 1.02 Jan 7 14:57:59 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00 Jan 7 14:57:59 localhost kernel: ivtv1: Encoder revision: 0x02050032 Jan 7 14:57:59 localhost kernel: ivtv1: Registered device video1 for encoder MPEG Jan 7 14:57:59 localhost kernel: ivtv1: Registered device video33 for encoder YUV Jan 7 14:57:59 localhost kernel: ivtv1: Registered device vbi1 for encoder VBI Jan 7 14:57:59 localhost kernel: ivtv1: Registered device video25 for encoder PCM audio Jan 7 14:57:59 localhost kernel: tuner 2-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4)) Jan 7 14:57:59 localhost kernel: sd 2:0:0:2: Attached scsi removable disk sdc Jan 7 14:57:59 localhost kernel: Vendor: Generic Model: USB MS Reader Rev: 1.03 Jan 7 14:57:59 localhost kernel: Type: Direct-Access ANSI SCSI revision: 00 Jan 7 14:57:59 localhost kernel: sd 2:0:0:3: Attached scsi removable disk sdd Jan 7 14:57:59 localhost kernel: ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 Jan 7 14:57:59 localhost kernel: PCI: VIA IRQ fixup for 0000:00:10.4, from 10 to 1 Jan 7 14:57:59 localhost kernel: ehci_hcd 0000:00:10.4: EHCI Host Controller Jan 7 14:57:59 localhost kernel: ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 4 Jan 7 14:57:59 localhost kernel: ehci_hcd 0000:00:10.4: irq 177, io mem 0xfdffd000 Jan 7 14:57:59 localhost kernel: ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 Jan 7 14:57:59 localhost kernel: usb usb4: configuration #1 chosen from 1 choice Jan 7 14:57:59 localhost kernel: hub 4-0:1.0: USB hub found Jan 7 14:57:59 localhost kernel: hub 4-0:1.0: 6 ports detected Jan 7 14:57:59 localhost kernel: ivtv: ==================== END INIT IVTV ==================== |
En als ik probeer iets af te spelen met player van /dev/video1 krijg ik dit erbij:
code:
1
2
3
4
5
6
7
8
9
10
11
12
13
| Jan 7 15:13:30 localhost kernel: irq 153: nobody cared (try booting with the "irqpoll" option) Jan 7 15:13:30 localhost kernel: [<c0403f28>] dump_trace+0x69/0x1af Jan 7 15:13:30 localhost kernel: [<c0404086>] show_trace_log_lvl+0x18/0x2c Jan 7 15:13:30 localhost kernel: [<c0404601>] show_trace+0xf/0x11 Jan 7 15:13:30 localhost kernel: [<c040468b>] dump_stack+0x15/0x17 Jan 7 15:13:30 localhost kernel: [<c043ffc6>] __report_bad_irq+0x36/0x7d Jan 7 15:13:30 localhost kernel: [<c04401af>] note_interrupt+0x1a2/0x1df Jan 7 15:13:30 localhost kernel: [<c043f86a>] __do_IRQ+0xa6/0xde Jan 7 15:13:30 localhost kernel: [<c0405385>] do_IRQ+0x9a/0xb8 Jan 7 15:13:30 localhost kernel: ======================= Jan 7 15:13:30 localhost kernel: handlers: Jan 7 15:13:30 localhost kernel: [<dd255b8b>] (ohci_irq_handler+0x0/0x786 [ohci1394]) Jan 7 15:13:30 localhost kernel: Disabling IRQ #153 |
Ik snap even niet waarom dit zo is
[ Voor 103% gewijzigd door RoBBS op 07-01-2007 15:28 ]
I said I'd be back...