[Ubuntu Edgy] Pinnacle PCTV i40 wordt niet herkend

[DaWit]

Ik probeer MythTV te installeren via deze guide, maar mijn pinnacle PCTV i40 lijkt niet te worden herkend door mijn Ubuntu Edgy systeem.

Als ik lspci intyp krijg ik dit:

code:

00:00.0 Host bridge: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 945G/GZ/P/PL Express PCI Express Root Port (rev 02)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation Unknown device 01df (rev a1)
03:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5789 Gigabit Ethernet PCI Express (rev 11)
04:02.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d0)
04:06.0 Mass storage controller: <pci_lookup_name: buffer too small> (rev 13)

En als ik dmesg intyp, krijg ik dit:

code:

[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[17179569.184000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[17179569.184000]  BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[17179569.184000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000f5080
[17179569.184000] On node 0 totalpages: 262128
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 32752 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 GBT                                   ) @ 0x000f69f0
[17179569.184000] ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
[17179569.184000] ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff30c0
[17179569.184000] ACPI: MCFG (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff6bc0
[17179569.184000] ACPI: MADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff6b00
[17179569.184000] ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x408
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:6 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:6 APIC version 20
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hdb1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 3015.154 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.580000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179569.580000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179569.600000] Memory: 1029508k/1048512k available (1910k kernel code, 18368k reserved, 1070k data, 308k init, 131008k highmem)
[17179569.600000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.680000] Calibrating delay using timer specific routine.. 6036.92 BogoMIPS (lpj=12073853)
[17179569.680000] Security Framework v1.0.0 initialized
[17179569.680000] SELinux:  Disabled at boot.
[17179569.680000] Mount-cache hash table entries: 512
[17179569.680000] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e43d 00000000 00000001
[17179569.680000] CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e43d 00000000 00000001
[17179569.680000] monitor/mwait feature present.
[17179569.680000] using mwait in idle threads.
[17179569.680000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179569.680000] CPU: L2 cache: 2048K
[17179569.680000] CPU: Hyper-Threading is disabled
[17179569.680000] CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e43d 00000000 00000001
[17179569.680000] Checking 'hlt' instruction... OK.
[17179569.696000] SMP alternatives: switching to UP code
[17179569.696000] checking if image is initramfs... it is
[17179570.136000] Freeing initrd memory: 5564k freed
[17179570.136000] ACPI: Core revision 20060707
[17179570.140000] ACPI: Looking for DSDT ... not found!
[17179570.144000] CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02
[17179570.144000] SMP alternatives: switching to SMP code
[17179570.144000] Booting processor 1/1 eip 3000
[17179570.152000] Initializing CPU#1
[17179570.236000] Calibrating delay using timer specific routine.. 6029.57 BogoMIPS (lpj=12059149)
[17179570.236000] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e43d 00000000 00000001
[17179570.236000] CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e43d 00000000 00000001
[17179570.236000] monitor/mwait feature present.
[17179570.236000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179570.236000] CPU: L2 cache: 2048K
[17179570.236000] CPU: Hyper-Threading is disabled
[17179570.236000] CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e43d 00000000 00000001
[17179570.236000] CPU1: Intel(R) Pentium(R) D CPU 3.00GHz stepping 02
[17179570.236000] Total of 2 processors activated (12066.50 BogoMIPS).
[17179570.236000] ENABLING IO-APIC IRQs
[17179570.236000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179570.380000] checking TSC synchronization across 2 CPUs: passed.
[17179570.384000] Brought up 2 CPUs
[17179570.460000] migration_cost=4000
[17179570.460000] NET: Registered protocol family 16
[17179570.460000] EISA bus registered
[17179570.460000] ACPI: bus type pci registered
[17179570.460000] PCI: Using MMCONFIG
[17179570.460000] Setting up standard PCI resources
[17179570.472000] ACPI: Interpreter enabled
[17179570.472000] ACPI: Using IOAPIC for interrupt routing
[17179570.476000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179570.476000] PCI: Probing PCI hardware (bus 00)
[17179570.476000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179570.476000] Boot video device is 0000:01:00.0
[17179570.476000] PCI: Transparent bridge - 0000:00:1e.0
[17179570.476000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179570.488000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[17179570.488000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[17179570.492000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[17179570.492000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[17179570.492000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.492000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[17179570.496000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[17179570.496000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.496000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[17179570.496000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[17179570.496000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[17179570.496000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179570.496000] pnp: PnP ACPI init
[17179570.500000] pnp: PnP ACPI: found 14 devices
[17179570.500000] PnPBIOS: Disabled by ACPI PNP
[17179570.500000] PCI: Using ACPI for IRQ routing
[17179570.500000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[17179570.500000] pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved
[17179570.500000] PCI: Bridge: 0000:00:01.0
[17179570.500000]   IO window: disabled.
[17179570.500000]   MEM window: e0000000-e2ffffff
[17179570.500000]   PREFETCH window: d0000000-dfffffff
[17179570.500000] PCI: Bridge: 0000:00:1c.0
[17179570.500000]   IO window: 8000-8fff
[17179570.500000]   MEM window: disabled.
[17179570.500000]   PREFETCH window: disabled.
[17179570.500000] PCI: Bridge: 0000:00:1c.2
[17179570.500000]   IO window: disabled.
[17179570.500000]   MEM window: e5000000-e50fffff
[17179570.500000]   PREFETCH window: disabled.
[17179570.500000] PCI: Bridge: 0000:00:1e.0
[17179570.500000]   IO window: 9000-afff
[17179570.500000]   MEM window: e3000000-e4ffffff
[17179570.500000]   PREFETCH window: 50000000-500fffff
[17179570.500000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.500000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.500000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.500000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179570.500000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 177
[17179570.500000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[17179570.500000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179570.500000] NET: Registered protocol family 2
[17179570.544000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179570.544000] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[17179570.544000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[17179570.544000] TCP: Hash tables configured (established 131072 bind 65536)
[17179570.544000] TCP reno registered
[17179570.544000] audit: initializing netlink socket (disabled)
[17179570.544000] audit(1162651655.544:1): initialized
[17179570.544000] highmem bounce pool size: 64 pages
[17179570.544000] VFS: Disk quotas dquot_6.5.1
[17179570.544000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179570.544000] Initializing Cryptographic API
[17179570.544000] io scheduler noop registered
[17179570.544000] io scheduler anticipatory registered
[17179570.544000] io scheduler deadline registered
[17179570.544000] io scheduler cfq registered (default)
[17179570.544000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.544000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179570.544000] assign_interrupt_mode Found MSI capability
[17179570.544000] Allocate Port Service[0000:00:01.0:pcie00]
[17179570.544000] Allocate Port Service[0000:00:01.0:pcie03]
[17179570.544000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179570.544000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179570.544000] assign_interrupt_mode Found MSI capability
[17179570.544000] Allocate Port Service[0000:00:1c.0:pcie00]
[17179570.544000] Allocate Port Service[0000:00:1c.0:pcie02]
[17179570.544000] Allocate Port Service[0000:00:1c.0:pcie03]
[17179570.544000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 177
[17179570.544000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[17179570.544000] assign_interrupt_mode Found MSI capability
[17179570.544000] Allocate Port Service[0000:00:1c.2:pcie00]
[17179570.544000] Allocate Port Service[0000:00:1c.2:pcie02]
[17179570.544000] Allocate Port Service[0000:00:1c.2:pcie03]
[17179570.544000] isapnp: Scanning for PnP cards...
[17179570.896000] isapnp: No Plug & Play device found
[17179570.920000] Real Time Clock Driver v1.12ac
[17179570.920000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179570.920000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.920000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179570.924000] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179570.924000] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[17179570.924000] mice: PS/2 mouse device common for all mice
[17179570.924000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179570.924000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179570.924000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179570.924000] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[17179570.924000] PNP: PS/2 controller doesn't have KBD irq; using default 1
[17179570.936000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179570.936000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179570.948000] EISA: Probing bus 0 at eisa.0
[17179570.948000] Cannot allocate resource for EISA slot 8
[17179570.948000] EISA: Detected 0 cards.
[17179570.948000] TCP bic registered
[17179570.948000] NET: Registered protocol family 1
[17179570.948000] NET: Registered protocol family 8
[17179570.948000] NET: Registered protocol family 20
[17179570.948000] Starting balanced_irq
[17179570.948000] Using IPI No-Shortcut mode
[17179570.948000] ACPI: (supports S0 S3 S4 S5)
[17179570.948000] Freeing unused kernel memory: 308k freed
[17179571.744000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179572.808000] Capability LSM initialized
[17179572.844000] ACPI: Processor [CPU0] (supports 2 throttling states)
[17179572.844000] ACPI: Processor [CPU1] (supports 2 throttling states)
[17179573.200000] ICH7: IDE controller at PCI slot 0000:00:1f.1
[17179573.200000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177
[17179573.200000] ICH7: chipset revision 1
[17179573.200000] ICH7: not 100% native mode: will probe irqs later
[17179573.200000]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[17179573.200000]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
[17179573.200000] Probing IDE interface ide0...
[17179573.492000] hda: WDC WD2500JB-00GVC0, ATA DISK drive
[17179573.776000] hdb: WDC WD2500JB-00GVC0, ATA DISK drive
[17179573.836000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179573.856000] Probing IDE interface ide1...
[17179574.432000] hda: max request size: 512KiB
[17179574.432000] hda: Host Protected Area detected.
[17179574.432000]       current capacity is 488395055 sectors (250058 MB)
[17179574.432000]       native  capacity is 488397168 sectors (250059 MB)
[17179574.436000] hda: Host Protected Area disabled.
[17179574.436000] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
[17179574.436000] hda: cache flushes supported
[17179574.436000]  hda: hda1 hda2
[17179574.452000] hdb: max request size: 512KiB
[17179574.452000] hdb: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63, UDMA(100)
[17179574.456000] hdb: cache flushes supported
[17179574.456000]  hdb: hdb1 hdb2 < hdb5 >
[17179574.868000] SCSI subsystem initialized
[17179574.872000] libata version 1.20 loaded.
[17179574.872000] ata_piix 0000:00:1f.2: version 1.05
[17179574.872000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 217
[17179574.872000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179574.872000] ata1: SATA max UDMA/133 cmd 0xD000 ctl 0xD402 bmdma 0xE000 irq 217
[17179574.872000] ata2: SATA max UDMA/133 cmd 0xD800 ctl 0xDC02 bmdma 0xE008 irq 217
[17179575.040000] ata1: disabling port
[17179575.040000] scsi0 : ata_piix
[17179575.208000] ata2: disabling port
[17179575.208000] scsi1 : ata_piix
[17179575.256000] IT8212: IDE controller at PCI slot 0000:04:06.0
[17179575.256000] ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 22 (level, low) -> IRQ 225
[17179575.256000] IT8212: chipset revision 19
[17179575.256000] it821x: controller in pass through mode.
[17179575.256000] IT8212: 100% native mode on irq 225
[17179575.256000]     ide2: BM-DMA at 0xa000-0xa007, BIOS settings: hde:pio, hdf:pio
[17179575.256000]     ide3: BM-DMA at 0xa008-0xa00f, BIOS settings: hdg:pio, hdh:pio
[17179575.256000] Probing IDE interface ide2...
[17179576.000000] hde: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
[17179576.340000] ide2 at 0x9010-0x9017,0x9402 on irq 225
[17179576.340000] Probing IDE interface ide3...
[17179576.920000] hde: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
[17179576.920000] Uniform CD-ROM driver Revision: 3.20
[17179576.992000] Probing IDE interface ide1...
[17179577.024000] usbcore: registered new driver usbfs
[17179577.024000] usbcore: registered new driver hub
[17179577.024000] USB Universal Host Controller Interface driver v3.0
[17179577.024000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
[17179577.024000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179577.024000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179577.024000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179577.024000] uhci_hcd 0000:00:1d.0: irq 233, io base 0x0000bc00
[17179577.024000] usb usb1: configuration #1 chosen from 1 choice
[17179577.024000] hub 1-0:1.0: USB hub found
[17179577.024000] hub 1-0:1.0: 2 ports detected
[17179577.132000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 217
[17179577.132000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179577.132000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179577.132000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179577.132000] uhci_hcd 0000:00:1d.1: irq 217, io base 0x0000b000
[17179577.132000] usb usb2: configuration #1 chosen from 1 choice
[17179577.132000] hub 2-0:1.0: USB hub found
[17179577.132000] hub 2-0:1.0: 2 ports detected
[17179577.240000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177
[17179577.240000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179577.240000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179577.240000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179577.240000] uhci_hcd 0000:00:1d.2: irq 177, io base 0x0000b400
[17179577.240000] usb usb3: configuration #1 chosen from 1 choice
[17179577.240000] hub 3-0:1.0: USB hub found
[17179577.240000] hub 3-0:1.0: 2 ports detected
[17179577.348000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
[17179577.348000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179577.348000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179577.348000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[17179577.348000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000b800
[17179577.348000] usb usb4: configuration #1 chosen from 1 choice
[17179577.348000] hub 4-0:1.0: USB hub found
[17179577.348000] hub 4-0:1.0: 2 ports detected
[17179577.456000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
[17179577.456000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179577.456000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179577.456000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[17179577.456000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[17179577.456000] ehci_hcd 0000:00:1d.7: irq 233, io mem 0xe5104000
[17179577.460000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179577.460000] usb usb5: configuration #1 chosen from 1 choice
[17179577.460000] hub 5-0:1.0: USB hub found
[17179577.460000] hub 5-0:1.0: 8 ports detected
[17179577.480000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[17179577.560000] Probing IDE interface ide3...
[17179578.160000] Attempting manual resume
[17179578.224000] kjournald starting.  Commit interval 5 seconds
[17179578.224000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.308000] usb 5-3: new high speed USB device using ehci_hcd and address 2
[17179578.464000] usb 5-3: configuration #1 chosen from 1 choice
[17179579.448000] usb 3-1: new full speed USB device using uhci_hcd and address 2
[17179579.652000] usb 3-1: configuration #1 chosen from 1 choice
[17179579.896000] usb 3-2: new full speed USB device using uhci_hcd and address 3
[17179580.156000] usb 3-2: configuration #1 chosen from 1 choice
[17179580.400000] usb 4-1: new low speed USB device using uhci_hcd and address 2
[17179580.592000] usb 4-1: configuration #1 chosen from 1 choice
[17179580.836000] usb 4-2: new low speed USB device using uhci_hcd and address 3
[17179581.020000] usb 4-2: configuration #1 chosen from 1 choice
[17179588.304000] Linux video capture interface: v1.00
[17179588.416000] input: PC Speaker as /class/input/input1
[17179588.492000] parport: PnPBIOS parport detected.
[17179588.492000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[17179588.568000] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
[17179588.644000] Linux agpgart interface v0.101 (c) Dave Jones
[17179588.660000] agpgart: Detected an Intel 945G Chipset.
[17179588.676000] agpgart: AGP aperture is 256M @ 0x0
[17179588.728000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179588.756000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179588.908000] saa7130/34: v4l2 driver version 0.2.14 loaded
[17179588.908000] ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 18 (level, low) -> IRQ 177
[17179588.908000] saa7133[0]: found at 0000:04:02.0, rev: 208, irq: 177, latency: 32, mmio: 0xe4000000
[17179588.908000] saa7133[0]: subsystem: 11bd:002e, board: Pinnacle PCTV 40i/50i/110i (saa7133) [card=77,autodetected]
[17179588.908000] saa7133[0]: board init: gpio is 200c000
[17179589.036000] input: Pinnacle PCTV as /class/input/input3
[17179589.036000] ir-kbd-i2c: Pinnacle PCTV detected at i2c-0/0-0047/ir0 [saa7133[0]]
[17179589.088000] saa7133[0]: i2c eeprom 00: bd 11 2e 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[17179589.088000] saa7133[0]: i2c eeprom 10: ff e0 60 02 ff 20 ff ff ff ff ff ff ff ff ff ff
[17179589.088000] saa7133[0]: i2c eeprom 20: 01 2c 01 02 02 01 04 30 98 ff 00 a0 ff 22 00 c2
[17179589.088000] saa7133[0]: i2c eeprom 30: 96 ff 03 30 15 01 ff ff 0c 22 17 87 03 48 d8 65
[17179589.088000] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179589.088000] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179589.088000] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179589.088000] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[17179589.104000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179589.104000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[17179589.132000] usbcore: registered new driver hiddev
[17179589.148000] input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input4
[17179589.148000] input: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.3-1
[17179589.168000] nvidia: module license 'NVIDIA' taints kernel.
[17179589.172000] input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input5
[17179589.172000] input: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.3-1
[17179589.188000] ts: Compaq touchscreen protocol output
[17179589.192000] input: Logitech USB Trackball as /class/input/input6
[17179589.192000] input: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1d.3-2
[17179589.192000] usbcore: registered new driver usbhid
[17179589.192000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179589.256000] drivers/media/video/spca5xx/spca5xx-main.c: USB SPCA5XX camera found. Type Vimicro Zc301P 0x301b
[17179589.352000] tuner 0-004b: chip found @ 0x96 (saa7133[0])
[17179589.416000] tuner 0-004b: setting tuner address to 61
[17179589.464000] tuner 0-004b: type set to tda8290+75a
[17179589.544000] usbcore: registered new driver spca5xx
[17179589.544000] drivers/media/video/spca5xx/spca5xx-main.c: spca5xx driver 00.57.08 registered
[17179589.548000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x03F0 pid 0x4911
[17179589.548000] usbcore: registered new driver usblp
[17179589.548000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[17179589.548000] usbcore: registered new driver libusual
[17179589.556000] saa7133[0]: registered device video1 [v4l2]
[17179589.556000] saa7133[0]: registered device vbi0
[17179589.556000] saa7133[0]: registered device radio0
[17179589.564000] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[17179589.568000] Initializing USB Mass Storage driver...
[17179589.568000] scsi2 : SCSI emulation for USB Mass Storage devices
[17179589.572000] usb-storage: device found at 2
[17179589.572000] usb-storage: waiting for device to settle before scanning
[17179589.572000] scsi3 : SCSI emulation for USB Mass Storage devices
[17179589.572000] usb-storage: device found at 3
[17179589.572000] usb-storage: waiting for device to settle before scanning
[17179589.572000] usbcore: registered new driver usb-storage
[17179589.572000] USB Mass Storage support registered.
[17179589.580000] saa7134 ALSA driver for DMA sound loaded
[17179589.580000] saa7133[0]/alsa: saa7133[0] at 0xe4000000 irq 177 registered as card -1
[17179589.628000] hw_random hardware driver 1.0.0 loaded
[17179589.816000] tg3.c:v3.59.1 (August 25, 2006)
[17179589.816000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 177
[17179589.816000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[17179589.852000] eth0: Tigon3 [partno(BCM95789) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:14:85:c3:e4:e9
[17179589.852000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
[17179589.852000] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[17179589.852000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[17179589.852000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[17179589.852000] NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-8776  Mon Oct 16 21:56:04 PDT 2006
[17179590.196000] lp0: using parport0 (interrupt-driven).
[17179590.224000] Adding 3028212k swap on /dev/disk/by-uuid/1ee85bdb-a620-4af5-8c7a-2bf68c1f2693.  Priority:-1 extents:1 across:3028212k
[17179590.272000] EXT3 FS on hdb1, internal journal
[17179591.140000] NET: Registered protocol family 17
[17179591.736000] tg3: eth0: Link is up at 100 Mbps, full duplex.
[17179591.736000] tg3: eth0: Flow control is on for TX and on for RX.
[17179594.576000] usb-storage: device scan complete
[17179594.576000]   Vendor: Generic   Model: STORAGE DEVICE    Rev: 9317
[17179594.576000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[17179594.576000] usb-storage: device scan complete
[17179594.576000]   Vendor: Generic   Model: STORAGE DEVICE    Rev: 9317
[17179594.576000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[17179594.576000]   Vendor: Generic   Model: STORAGE DEVICE    Rev: 9317
[17179594.576000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[17179594.576000]   Vendor: Generic   Model: STORAGE DEVICE    Rev: 9317
[17179594.576000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[17179594.580000]   Vendor: HP        Model: PSC 2355          Rev: 1.00
[17179594.580000]   Type:   Direct-Access                      ANSI SCSI revision: 02
[17179594.608000] sd 2:0:0:0: Attached scsi removable disk sda
[17179594.616000] sd 2:0:0:1: Attached scsi removable disk sdb
[17179594.616000] sd 2:0:0:2: Attached scsi removable disk sdc
[17179594.624000] sd 2:0:0:3: Attached scsi removable disk sdd
[17179594.640000] sd 3:0:0:0: Attached scsi removable disk sde
[17179594.652000] sd 2:0:0:0: Attached scsi generic sg0 type 0
[17179594.652000] sd 2:0:0:1: Attached scsi generic sg1 type 0
[17179594.652000] sd 2:0:0:2: Attached scsi generic sg2 type 0
[17179594.652000] sd 2:0:0:3: Attached scsi generic sg3 type 0
[17179594.652000] sd 3:0:0:0: Attached scsi generic sg4 type 0
[17179595.012000] NET: Registered protocol family 10
[17179595.016000] lo: Disabled Privacy Extensions
[17179595.016000] IPv6 over IPv4 tunneling driver
[17179595.752000] ACPI: Power Button (FF) [PWRF]
[17179595.752000] ACPI: Power Button (CM) [PWRB]
[17179595.860000] ibm_acpi: ec object not found
[17179595.896000] pcc_acpi: loading...
[17179599.904000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179599.904000] apm: disabled - APM is not SMP safe.
[17179603.292000] Bluetooth: Core ver 2.8
[17179603.292000] NET: Registered protocol family 31
[17179603.292000] Bluetooth: HCI device and connection manager initialized
[17179603.292000] Bluetooth: HCI socket layer initialized
[17179603.308000] Bluetooth: L2CAP ver 2.8
[17179603.308000] Bluetooth: L2CAP socket layer initialized
[17179603.316000] Bluetooth: RFCOMM socket layer initialized
[17179603.316000] Bluetooth: RFCOMM TTY layer initialized
[17179603.316000] Bluetooth: RFCOMM ver 1.7
[17179605.324000] eth0: no IPv6 routers present

Excuses voor de lange tekst, maar ik kon niet vinden hoe je dit kan inkorten.

Ik gebruik de 2.6.17-10-generic kernel. Onder XP wordt de kaart trouwens wel herkend en volgens verschillende fora zou Linux hem ook moeten herkennen

[Chiron]

Ik heb zelf ook een pinnacle kaart, en opgelost door met modprobe te kloten. Standaard worden er geen parameters aan de bttv module meegegeven, die heb ik zelf achteraf nog een keer uit moeten vinden. Zoek eens op documentatie over de bttv module

Zelf heb ik het zaakje iig aan het werk gekregen door eerst de module uit te laden met 'sudo modprobe -r bttv' en vervolgens 'sudo modprobe bttv tuner=39 pll=1' om de module met de juiste gegevens in te laden (maar dat verschilt per merk/type kaart wat voor tuner erop zit).

[Verwijderd]

Ik zelf heb volgens lspci een Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
Op de doos staat E-Tech TVPI03 ik heb die nog steeds niet goed aan de praat gekregen (ook niet onder Dapper) het beste wat me gelukt is is de saa7134 module laden met card=78 helaas zonder geluid.

[Chiron]

Het geluid is een kwestie van aanpielen met je ALSA mixer, waarschijnlijk staat de goeie input niet geselecteerd of staat de fader van dat kanaal gewoon dicht

(Als er iemand een goeie guide heeft over de ALSA mixer icm een terratec dmx 6fire geef een brul aub)

[Mark_Steverink]

Volgens mij wordt de kaart wel herkend, en is deze benaderbaar via /dev/video1 . Dat staat in de uitvoer van je dmesg.
Het is trouwens geen bttv, dus alle replies daarover kun je negeren.

[Chiron]

Hier kwam mijn tv kaart ook gewoon voorbij in de dmesg, maar zonder de goede tuner erbij, dus dat ging toch echt niet werken.

Het zal best geen bttv zijn, maar je moet wel met modprobe aan de gang om hem de juiste tuner mee te geven, anders doet ie het alsnog niet. Maargoed als de TS dat genegeerd had dan had ie nu nog geeneens beeld

Met de saa7134 module heeft ie blijkbaar wel de goede te pakken En nogmaals het geluid is afaik een kwestie van de ALSA mixer uitvissen, aangenomen dat wat betreft audio de tv kaart via een line-kabel naar de geluidskaart doorgelust is.