[grub] start niet

Pagina: 1
Acties:

  • Sosabowski
  • Registratie: Juni 2003
  • Laatst online: 18-12-2025
ok, ik zit redelijk met mijn handen in t haar.

Als ik opstart komt grub niet verder dan
code:
1
2
3
Grub loading stage 1.5.

Grub loading, please wait...

Nou kan ik lang wachten maar er gebeurt helemaal niks. Echter als ik de twee sata schijven loskoppel van de sata controller start hij wel normaal op. Het ligt niet aan de schijven want als ik er twee andere aan hang weigert hij ook. Alle vier de schijven zijn prima te benaderen als ze on-board worden aangesloten. Voor de duidelijkheid, grub/ubuntu staan op een ide schijf.

Het verplaatsen van de sata controller naar een ander pci slot bied ook geen soelaas. Herinstallatie van grub ook niet.

Op de faq van grub wordt dit probleem verklaart door een onjuiste device.map. Hier is de mijne:
code:
1
2
3
4
5
6
(hd0)   /dev/hda
(hd1)   /dev/hdb
(hd2)   /dev/sda
(hd3)   /dev/sdb
(hd4)   /dev/sdc
(hd5)   /dev/sdd

Linux en grub staan dus op de primaire master schijf (hda), hdb is de primaire slave schijf en sd* zijn de schijven op de onboard controller en op de satakaart (ieder twee).

Tot slot, de biosen van de sata chips herkennen de schijven prima, dus lijkt het toch een software probleem te zijn. Wie helpt me uit de brand?

The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts. -- Bertrand Russell


  • cherwin
  • Registratie: Maart 2006
  • Niet online
Probeer eens de sata schijven van de device map af te halen, zodat je dit krijgt

code:
1
2
(hd0)   /dev/hda
(hd1)   /dev/hdb

Tell me your problem, not the solution you think I should build for you.


  • Sosabowski
  • Registratie: Juni 2003
  • Laatst online: 18-12-2025
nope, geen verbetering.

The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts. -- Bertrand Russell


  • Sosabowski
  • Registratie: Juni 2003
  • Laatst online: 18-12-2025
SCHOP!

The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts. -- Bertrand Russell


Verwijderd

Wat voor distro en hoe ziet je grub.conf of menu.lst eruit?

  • Sosabowski
  • Registratie: Juni 2003
  • Laatst online: 18-12-2025
Verwijderd schreef op zondag 19 november 2006 @ 18:25:
Wat voor distro en hoe ziet je grub.conf of menu.lst eruit?
Kubuntu 6.10
menu.lst
code:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
default         0
timeout         3
hiddenmenu

title           Ubuntu, kernel 2.6.17-10-generic
root            (hd0,0)
kernel          /boot/vmlinuz-2.6.17-10-generic root=/dev/hda1 ro quiet splash
initrd          /boot/initrd.img-2.6.17-10-generic
quiet
savedefault
boot

title           Ubuntu, kernel 2.6.17-10-generic (recovery mode)
root            (hd0,0)
kernel          /boot/vmlinuz-2.6.17-10-generic root=/dev/hda1 ro single
initrd          /boot/initrd.img-2.6.17-10-generic
boot

title           Ubuntu, memtest86+
root            (hd0,0)
kernel          /boot/memtest86+.bin
quiet
boot

Als ik deze lees kan het ook nog aan het bios liggen. Maar die staat netjes ingestald als de IDE schijf als eerste boot optie.

[ Voor 10% gewijzigd door Sosabowski op 20-11-2006 22:43 ]

The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts. -- Bertrand Russell


  • DJrDJ666
  • Registratie: April 2002
  • Laatst online: 20-10-2025
ik had zojuist hetzelfde probleem (winXP op sda en Mandriva op hda) met grub precies dezelfde melding.
ik heb toen in de bios de bootvolgorde veranderd en toen werkte het wel :)

  • Sosabowski
  • Registratie: Juni 2003
  • Laatst online: 18-12-2025
schopje....

ook met 7.04 geen verbetering...

The whole problem with the world is that fools and fanatics are always so certain of themselves, and wiser people so full of doubts. -- Bertrand Russell


  • deadinspace
  • Registratie: Juni 2001
  • Laatst online: 01-02 13:45

deadinspace

The what goes where now?

Probeer eens je device.map zo aan te passen:
code:
1
2
3
4
5
6
(hd0)   /dev/sda
(hd1)   /dev/sdb
(hd2)   /dev/sdc
(hd3)   /dev/sdd
(hd4)   /dev/hda
(hd5)   /dev/hdb

Of zo:
code:
1
2
3
4
5
6
(hd0)   /dev/sda
(hd1)   /dev/sdb
(hd2)   /dev/hda
(hd3)   /dev/hdb
(hd4)   /dev/sdc
(hd5)   /dev/sdd
Pagina: 1