Toon posts:

[Xorg 7.0] unichrome onder arch linux

Pagina: 1
Acties:
  • 128 views sinds 30-01-2008
  • Reageer

woensdag 15 maart 2006 21:11

Acties:
  • jurp5
  • Registratie: Februari 2003
  • Laatst online: 30-01 20:52

jurp5

Topicstarter
Ik heb arch linux geinstalleerd evenals xf86-video-unichrome
maar als ik xorg nu config werkt de module van unichrome(via) niet,
ik krijg een knipperend lampje op mijn monitor(wat duid op out of range of standby)
als ik via in xorg.conf verander naar vesa werkt het allemaal wel.
Ik zou graag willen dat unichrome met drm en glx zou werken.

--
Jurriaan

woensdag 15 maart 2006 22:40

Acties:
  • jurp5
  • Registratie: Februari 2003
  • Laatst online: 30-01 20:52

jurp5

Topicstarter
ik heb een K8M800 chip

het maakt trouwens niks uit of ik de h en vsync wijzig

X(andere xorg.conf gemaakt met xorgconfig) -verbose output:
code:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313

X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.15-ARCH i686
Current Operating System: Linux jurp5 2.6.15-ARCH #1 SMP PREEMPT Sat Mar 11 11:41:17 CET 2006 i686
Build Date: 04 March 2006
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Wed Mar 15 21:55:11 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "My Monitor"
(**) |   |-->Device "* Generic VESA compatible"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/TTF").
(**) FontPath set to "/usr/share/fonts/misc"
(**) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.0.0
(--) using VT number 8

(--) PCI:*(1:0:0) unknown vendor (0x1106) unknown chipset (0x3108) rev 1, Mem @ 0xf4000000/26, 0xfb000000/24, BIOS @ 0xfaf00000/16
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 7.0.0, module version = 2.1.0
(II) Loading /usr/lib/xorg/modules/drivers/via_drv.so
(II) Module via: vendor="http://unichrome.sf.net/"
    compiled for 7.0.0, module version = 0.2.3
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.0.4
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.0.1
(II) VIA: driver for VIA Unichrome integrated graphics.
(II)     VT3122: CLE266 (CastleRock).
(II)     VT7205: KM400, KM400A, KN400, P4M800 (Unichrome).
(II)     VT3108: K8M800, K8N800, K8N800A (Unichrome Pro, aka Pro B).
(II)     VT3118: CN400, PM800, PM880, PN800 (Unichrome Pro A).
(II)     VT3344: VN800, P4M800Pro (Unichrome Pro).
(II)     VT3157: CX700 (Unichrome Pro - not yet released).
(--) Assigning device section with no busID to primary device
(--) Chipset VT3108 found
(!!) VIA Technologies does not support or endorse this driver in any way.
(!!) For support, please refer to http://unichrome.sf.net/ or your X vendor.
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 0.1.0
(**) VIA(0): Depth 16, (--) framebuffer bpp 16
(==) VIA(0): RGB weight 565
(==) VIA(0): Default visual is TrueColor
(==) VIA(0): Using HW cursor
(--) VIA(0): Chipset: "VT3108"
(WW) VIA(0): Support for VT3108 is limited at this time.
(--) VIA(0): mapping MMIO @ 0xfb000000 with size 0x9000
(--) VIA(0): mapping BitBlt MMIO @ 0xfb200000 with size 0x10000
(--) VIA(0): Chipset Rev.: 0
(--) VIA(0): Detected Asustek K8V-MX.
(==) VIA(0): Using gamma correction (1.0, 1.0, 1.0)
(--) VIA(0): videoram =  32768k
(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.2.0
(II) VIA(0): I2C bus "I2C bus 1" initialized.
(II) VIA(0): I2C bus "I2C bus 2" initialized.
(II) VIA(0): I2C bus "I2C bus 3" initialized.
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.0.0
(II) VIA(0): I2C device "I2C bus 1:ddc2" registered at address 0xA0.
(II) VIA(0): I2C device "I2C bus 1:ddc2" removed.
(II) VIA(0): My Monitor: Using hsync range of 31.50-64.30 kHz
(II) VIA(0): My Monitor: Using vrefresh range of 50.00-70.00 Hz
(II) VIA(0): Clock range:  20.00 to 230.00 MHz
(II) VIA(0): Not using default mode "640x350" (vrefresh out of range)
(II) VIA(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "640x400" (vrefresh out of range)
(II) VIA(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "720x400" (vrefresh out of range)
(II) VIA(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "640x480" (vrefresh out of range)
(II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "640x480" (vrefresh out of range)
(II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "640x480" (vrefresh out of range)
(II) VIA(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "800x600" (vrefresh out of range)
(II) VIA(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1024x768" (interlace mode not supported)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1024x768" (vrefresh out of range)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1024x768" (hsync out of range)
(II) VIA(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1152x864" (hsync out of range)
(II) VIA(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1280x960" (hsync out of range)
(II) VIA(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) VIA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1280x1024" (hsync out of range)
(II) VIA(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1600x1200" (hsync out of range)
(II) VIA(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1792x1344" (hsync out of range)
(II) VIA(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1856x1392" (hsync out of range)
(II) VIA(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "832x624" (vrefresh out of range)
(II) VIA(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1152x864" (hsync out of range)
(II) VIA(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) VIA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) VIA(0): CrtcHSyncEnd out of range.
(II) VIA(0): Not using default mode "1400x1050" (horizontal sync too wide)
(II) VIA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) VIA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1920x1200" (hsync out of range)
(II) VIA(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "848x480" (hsync out of range)
(II) VIA(0): Not using default mode "424x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "424x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "848x480" (vrefresh out of range)
(II) VIA(0): Not using default mode "424x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "848x480" (vrefresh out of range)
(II) VIA(0): Not using default mode "424x240" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1152x864" (hsync out of range)
(II) VIA(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1152x864" (hsync out of range)
(II) VIA(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) VIA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1400x1050" (hsync out of range)
(II) VIA(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1280x800" (vrefresh out of range)
(II) VIA(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1280x800" (hsync out of range)
(II) VIA(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1680x1050" (hsync out of range)
(II) VIA(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1680x1050" (hsync out of range)
(II) VIA(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1680x1050" (hsync out of range)
(II) VIA(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1680x1050" (hsync out of range)
(II) VIA(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "640x360" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "640x360" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1280x720" (vrefresh out of range)
(II) VIA(0): Not using default mode "640x360" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1280x720" (vrefresh out of range)
(II) VIA(0): Not using default mode "640x360" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1280x768" (vrefresh out of range)
(II) VIA(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1280x768" (hsync out of range)
(II) VIA(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1920x1200" (hsync out of range)
(II) VIA(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) VIA(0): CrtcHBlankStart out of range.
(II) VIA(0): Not using default mode "1920x1200" (horizontal timing out of range)
(II) VIA(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "2560x1600" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "2560x1600" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "2560x1600" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "2560x1600" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1280x800" (bad mode clock/interlace/doublescan)
(II) VIA(0): Not using default mode "1400x1050" (width too large for virtual size)
(--) VIA(0): Virtual size is 1280x1024 (pitch 1280)
(**) VIA(0): *Default mode "1280x1024": 108.0 MHz (scaled from -2059165.7 MHz), 64.0 kHz, 60.0 Hz
(**) VIA(0): *Default mode "1024x768": 75.0 MHz (scaled from 478898.2 MHz), 56.5 kHz, 70.1 Hz
(**) VIA(0): *Default mode "800x600": 40.0 MHz (scaled from -2035236.9 MHz), 37.9 kHz, 60.3 Hz
(**) VIA(0): *Default mode "640x480": 25.2 MHz (scaled from -1625796.6 MHz), 31.5 kHz, 60.0 Hz
(**) VIA(0):  Default mode "1280x960": 108.0 MHz (scaled from -2059165.7 MHz), 60.0 kHz, 60.0 Hz
(**) VIA(0):  Default mode "1280x800": 98.9 MHz (scaled from -547668.5 MHz), 58.3 kHz, 70.0 Hz
(**) VIA(0):  Default mode "1280x800": 83.5 MHz (scaled from 117165.1 MHz), 49.7 kHz, 60.0 Hz
(**) VIA(0):  Default mode "1152x864": 96.8 MHz (scaled from -233642.5 MHz), 63.0 kHz, 70.0 Hz
(**) VIA(0):  Default mode "1152x864": 81.6 MHz (scaled from 794901.5 MHz), 53.7 kHz, 60.0 Hz
(**) VIA(0):  Default mode "1280x768": 95.0 MHz (scaled from 355650.6 MHz), 56.0 kHz, 70.0 Hz
(**) VIA(0):  Default mode "1280x768": 80.1 MHz (scaled from -1741134.8 MHz), 47.7 kHz, 60.0 Hz
(**) VIA(0):  Default mode "1280x720": 89.0 MHz (scaled from -304189.4 MHz), 52.5 kHz, 70.0 Hz
(**) VIA(0):  Default mode "1280x720": 74.5 MHz (scaled from -2037264.4 MHz), 44.8 kHz, 60.0 Hz
(**) VIA(0):  Default mode "1152x768": 65.0 MHz (scaled from 137558.3 MHz), 44.2 kHz, 54.8 Hz
(**) VIA(0):  Default mode "1024x768": 65.0 MHz (scaled from 987707.4 MHz), 48.4 kHz, 60.0 Hz
(**) VIA(0):  Default mode "800x600": 36.0 MHz (scaled from 745267.2 MHz), 35.2 kHz, 56.2 Hz
(**) VIA(0):  Default mode "848x480": 37.5 MHz (scaled from 1492561.9 MHz), 35.0 kHz, 70.0 Hz
(==) VIA(0): DPI set to (75, 75)
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.0.0
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.2.0
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 0.1.0
(--) VIA(0): mapping framebuffer @ 0xf4000000 with size 0x2000000
(==) VIA(0): Removed MMIO write-combining range (0xf4000000,0x2000000)
(==) VIA(0): Write-combining range (0xf4000000,0x2000000)
(--) VIA(0): Frame buffer start: 0xb5b7a000, free start: 0x280000 end: 0x2000000
(--) VIA(0): mapping MMIO @ 0xfb000000 with size 0x9000
(--) VIA(0): mapping BitBlt MMIO @ 0xfb200000 with size 0x10000
(II) VIA(0): 3D Engine has been initialized.
(II) VIA(0): [drm] Not using DMA for copying to FB (no DRI)
.(II) VIA(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    8x8 color pattern filled rectangles
    Solid Lines
    Dashed Lines
    Image Writes
    Offscreen Pixmaps
    Setting up tile and stipple cache:
        32 128x128 slots
        9 256x256 slots
        32 8x8 color pattern slots
(==) VIA(0): Backing store disabled
(II) VIA(0): direct rendering disabled
(==) RandR enabled
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "IMPS/2"
(**) Mouse1: Core Pointer
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Keyboard1: Core Keyboard
(**) Keyboard1: Protocol: standard
(**) Keyboard1: XkbRules: "xorg"
(**) Keyboard1: XkbModel: "pc105"
(**) Keyboard1: XkbLayout: "us"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing.

[ Voor 31% gewijzigd door jurp5 op 16-03-2006 06:59 ]

donderdag 16 maart 2006 00:02

Acties:
  • mOrPhie
  • Registratie: September 2000
  • Laatst online: 29-01 12:00

mOrPhie

❤️❤️❤️❤️🤍

Er is niets mis met X, je hebt immers geen (EE) regels in je log. Wat je moet doen is in de specificaties van je monitor de h- en vsync opzoeken. Soms is het type-nummer van je monitor + "xorg.conf" in google al genoeg om een direct te kopieren "Monitor" section te vinden die eruit ziet als zoiets:

code:
1
2
3
4
5

Section "Monitor"
    Identifier  "190S"
    HorizSync   63.9
    VertRefresh 60
EndSection

Een experimentele community-site: https://technobabblenerdtalk.nl/. DM voor invite code.

donderdag 16 maart 2006 06:53

Acties:
  • jurp5
  • Registratie: Februari 2003
  • Laatst online: 30-01 20:52

jurp5

Topicstarter
ik kan niks vinden als ik zoek op "acana advance 17s xorg" (zonder haakjes).
zonder xorg of xorg.conf zijn er wel resultaten maar met niet.
maar als ik de via driver in vesa verander werkt het wel.
dus ik denk niet dat het aan de hsync en vsync ligt

donderdag 16 maart 2006 08:42

Acties:
  • VROEM!
  • Registratie: Februari 2000
  • Laatst online: 18-05-2025

VROEM!

broembroem!

Ik zet vaak de horizsync niet eens in de xorg.conf, alleen de vertrefresh zet ik vast op 60. Dat werkt tot nog toe altijd bij mij :)

ieeeepppppp :P

vrijdag 17 maart 2006 16:19

Acties:
  • jurp5
  • Registratie: Februari 2003
  • Laatst online: 30-01 20:52

jurp5

Topicstarter
bij mij niet :(

vrijdag 17 maart 2006 20:08

Acties:
  • _JGC_
  • Registratie: Juli 2000
  • Laatst online: 19:48

_JGC_

Heb je xf86-video-via al geprobeerd? beide drivers zijn in principe hetzelfde, maar de unichrome driver is iets losser qua modelines. Waar de VIA driver alleen modes doet die in je videobios staan, vuurt de unichrome driver zowat alles op je scherm af waar jij een modeline voor genereert.

vrijdag 17 maart 2006 22:40

Acties:
  • jurp5
  • Registratie: Februari 2003
  • Laatst online: 30-01 20:52

jurp5

Topicstarter
werkkt glx en dri dan wel?

vrijdag 17 maart 2006 22:54

Acties:
  • jurp5
  • Registratie: Februari 2003
  • Laatst online: 30-01 20:52

jurp5

Topicstarter
Ik heb het geprobeert, de via driver werkt wel dri word geladen en glx ook maar desnelheid is niet echt hoog(opengl is zeer schokkerig enz.
glxinfo geeft(met kdm) ::
code:
1

direct rendering: No


zonder kdm is het echter :
code:
1

direct rendering: Yes


maar opengl werkt dan nogsteeds schokkerig
:?

edit: nu ik het als root uitvoer werkt het wel snel(62 fps met supertux geen schokken)
maar de achtergrond is wit, dat is raar


glxgears:
code:
1
2

3759 frames in 5.0 seconds = 751.713 FPS
3777 frames in 5.0 seconds = 755.308 FPS

dat klinkt goed maar nu moet ik kdm en supertux nog goed krijgen(dri en glx werkt alleen op losse X, zonder kdm)

[ Voor 94% gewijzigd door jurp5 op 17-03-2006 23:09 ]

zaterdag 18 maart 2006 08:14

Acties:
  • jurp5
  • Registratie: Februari 2003
  • Laatst online: 30-01 20:52

jurp5

Topicstarter
ik moet mode 0666 uncommenten bij de dri sectie en dan werkt dri ook onder kdm.
maar nu gweeft supertux nogsteeds een witte achtergrond. hoe zou dat kome?

zaterdag 18 maart 2006 23:35

Acties:
  • _JGC_
  • Registratie: Juli 2000
  • Laatst online: 19:48

_JGC_

Buggy OpenGL driver, ik heb het hier ook met mga en MergedFB ingeschakeld, is supertux ook niet om aan te zien. Verschil tussen via en unichrome zou je niet moeten merken in 3D, aangezien de 3D driver dezelfde uit Mesa 6.4.2 is.

zaterdag 18 maart 2006 23:41

Acties:
  • Arjan
  • Registratie: Juni 2001
  • Niet online

Arjan

copyright is wrong

offtopic:
weet iemand wanneer xorg7.0 richting debian komt? kan niet wachten op compiz...

oprecht vertrouwen wordt nooit geschaad

Pagina: 1
Reageer

Apple iPhone 17 LG OLED evo G5 Google Pixel 10 Samsung Galaxy S25 Star Wars: Outlaws Nintendo Switch 2 Apple AirPods Pro (2e generatie) Sony PlayStation 5 Pro

Tweakers is onderdeel van DPG Media B.V.
Alle rechten voorbehouden - Auteursrecht © 1998 - 2026 • Hosting door TrueFullstaq