Raid 10 waarvan schijf mist

[Verwijderd]

ik heb hier een raid 10 configuratie op een intel ICH7R southbride, 4x 250GB waarop ondermeer mijn windows installatie staat.

nu heeft er bij 1 van de schijven een powerkabeltje los gehangen en nu is die schijf uit de array gehaald hoe voeg ik deze weer toe? (zie foto)

[MADG0BLIN]

Voedingskabel er terug in doen, aansluiten en de meeste rebuilden dan automatisch. :0

[FastBunny]

Kun je niet kiezen voor replace missing disk of iets dergelijks?

[Occy74]

Volgens de manual die hier te vinden is:

21.1.6 Degraded RAID 10 Volume
A RAID 10 volume is reported as ;Degraded; when one of the members has failed or is
disconnected. A RAID 10 volume is reported as ;Failed; when at least two of the members have
failed or are disconnected. If this occurs, restore the volume by following the appropriate
procedure below:

Missing Member
1. Make sure the system is powered off.
2. Reconnect the missing hard drive.
3. Power on the system. During the system startup, the Intel Matrix Storage option ROM
user interface will display the RAID 10 volume status as ;Rebuild;.
4. After the operating system is running, select Intel Matrix Storage Console from the
Start menu or click the Intel Matrix Storage Manager tray icon.
5. From the View menu, select ;Advanced Mode; to display a detailed view of the Intel
Matrix Storage Console.
6. From the Volumes view in the device pane, select the volume and view the information
pane. The status shows as ;
7. Rebuilding: % complete;. After the rebuild is complete, the status shows as ;Normal;.

Failed Members
1. Make sure the system is powered off.
2. Replace the failed hard drive with new hard drive that is of equal or greater capacity.
3. Power on the system. During the system startup, the Intel Matrix Storage option ROM
user interface will display the RAID 10 volume status as ;Rebuild;.
4. After the operating system is running, select Intel Matrix Storage Console from the
Start menu or click the Intel Matrix Storage Manager tray icon.
5. From the View menu, select ;Advanced Mode; to display a detailed view of the Intel
Matrix Storage Console.
6. From the Volumes view in the device pane, select the volume and view the information
pane. The status shows as;
7. Rebuilding: % complete;. After the rebuild is complete, the status shows as ;Normal;.

[Verwijderd]

vooral die laatste post was erg behulpzaam, ding heeft eerst met 3 schijven staan rebuilden (duurt een uur) en nu met de 4e schijf! thx all