Toon posts:

Nero doet vaag (scsi/ide fout???)

Pagina: 1
Acties:

zaterdag 20 januari 2001 11:44

Acties:
  • PLozekoot
  • Registratie: Juni 2000
  • Laatst online: 04-01 20:10

PLozekoot

Topicstarter
Hoi,

Laatste tijd als ik met nero datacd's etc brand heb ik vaak gelazer.
Eerst dacht ik dat het kwam door de optie 'cd afronden' maar vandaag was het helemaal te gek voor woorden, gewoon zomaar een scsi/ide fout?

weet iemand wat dit is en wat ik eraan kan doen?
thnx!

btw. hier is de log van de verotte cd!

Lozekoot
Lozekoot
1500-4010-1122-0228-8534-9545*

Windows 98 4.10
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 5-6-98 23:33:14
Nero-versie: 5.0.2.0
Recorder: <CREATIVE CD-RW RW8438E> Versie: FC03 - HA 1 TA 0 - 5.0.2.0
Adapter-stuurprogramma:<ESDI_506> HA 1
Drive buffer : 2048kB
CD-ROM: <CREATIVE CD-RW RW8438E> Versie: FC03 - HA 1 TA 0 - 5.0.2.0
Adapter-stuurprogramma:<ESDI_506> HA 1
BCD 40SB CD-ROM (Target 1, D:): Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
CREATIVE CD-RW RW8438E (Target 0, E:): Autoinsert On, DMA On, Disconnect On, SyncDataXfer Off
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 20971520 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 127MB (130216kB)
Free physical memory: 0MB (20kB)
Memory in use : 75 %
Uncached PFiles: 0xFC
Wizard: On

CD-ROM (ISO)
20.1.2001

11:32:06 #1 Text 0 File BusArbiter.cpp, Line 84
bus arbitration: bus type category
SCSI 0
unknown 1
other 2
IDE 3
drives from category 1 and 3 competition level 1
stall writers at 95%, reactivate at 70%

11:32:06 #2 Text 0 File Reader.cpp, Line 75
Reader running

11:32:06 #3 Text 0 File Writer.cpp, Line 129
Writer CREATIVE CD-RW RW8438E running

11:32:06 #4 Text 0 File BusArbiter.cpp, Line 827
Sat Jan 20 11:32:06 2001
CREATIVE CD-RW RW8438E: Register
arbitration enabled
n. category bus drive writer name
0. 3 1 0 yes CREATIVE CD-RW RW8438E
i
r

11:32:06 #5 ISO9660GEN -11 File geniso.cpp, Line 3236
First writeable address = 0 (0x00000000)

11:32:07 #6 Text 0 File ThreadedTransferInterface.cpp, Line 637
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 209578 (209578) = #209578
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

11:32:12 #7 Text 0 File Burncd.cpp, Line 1527
Recorder: CREATIVE CD-RW RW8438E;
CDR code: 00 97 31 00; CD manufacturer: Ritek Co.

11:32:12 #8 Text 0 File ThreadedTransferInterface.cpp, Line 769
Prepare recorder CREATIVE CD-RW RW8438E for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 429522944

11:32:12 #9 Text 0 File ThreadedTransferInterface.cpp, Line 797
Removed 2 run-out blocks from end of track 1.

11:32:12 #10 Text 0 File ThreadedTransferInterface.cpp, Line 637
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 209578 (209578) = #209578
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 209576 blocks [CREATIVE CD-RW RW8438E]
--------------------------------------------------------------

11:32:12 #11 Phase 24 File dlgbrnst.cpp, Line 1163
Begin met cache-opslag van bestanden

11:32:31 #12 Phase 25 File dlgbrnst.cpp, Line 1163
Cache-opslag van bestanden voltooid

11:32:31 #13 Phase 36 File dlgbrnst.cpp, Line 1163
Begin brandproces met 8x (1200 kb/s)

11:32:32 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1711
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

11:32:32 #15 Text 0 File BusArbiter.cpp, Line 827
Sat Jan 20 11:32:32 2001
READ: Register
arbitration enabled
n. category bus drive writer name
0. 3 1 0 yes CREATIVE CD-RW RW8438E
1. 1 -1 -1 no READ
i i
r r

11:33:52 #16 Text 0 File Scsicmd.cpp, Line 1788
SCSI timeout (b)

11:33:52 #17 CDR -1175 File Cdrdrv.cpp, Line 1244
Internal trace
Command timeout occured: timeout 30000ms, counter 1
CDB Data: 0x2A 0x00 0x00 0x00 0x61 0x26 0x00 0x00 0x1E 0x00 0x00 0x00


11:33:52 #18 SCSI -1000 File Cdrdrv.cpp, Line 1275
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04B4D9E0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x61 0x26 0x00 0x00 0x1E 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

11:33:52 #19 SCSI -1000 File Cdrdrv.cpp, Line 1325
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04B4D9E0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x61 0x26 0x00 0x00 0x1E 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

11:33:52 #20 CDR -1000 File Writer.cpp, Line 309
SCSI/IDE-fout

11:33:52 #21 Text 0 File ThreadedTransfer.cpp, Line 211
all writers idle, stopping conversion

11:33:52 #22 Text 0 File ThreadedTransfer.cpp, Line 205
conversion idle, stopping reader

11:34:02 #23 Text 0 File Scsicmd.cpp, Line 1788
SCSI timeout (b)

11:34:02 #24 SCSI -1000 File Cdrdrv.cpp, Line 1124
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06ABFD98
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

11:34:02 #25 CDR -1175 File Cdrdrv.cpp, Line 1150
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00


11:34:02 #26 SCSI -1000 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06ABFD98
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

11:34:02 #27 Text 0 File Scsicmd.cpp, Line 1782
SCSI timeout (a)

11:34:02 #28 SCSI -1000 File Cdrdrv.cpp, Line 1124
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

11:34:02 #29 CDR -1175 File Cdrdrv.cpp, Line 1150
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00


11:34:02 #30 SCSI -1000 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

11:34:12 #31 Text 0 File Scsicmd.cpp, Line 1782
SCSI timeout (a)

11:34:12 #32 SCSI -1000 File Cdrdrv.cpp, Line 1124
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

11:34:12 #33 CDR -1175 File Cdrdrv.cpp, Line 1150
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00


11:34:12 #34 SCSI -1000 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

11:36:23 #35 CDR -1000 File WriterStatus.cpp, Line 152
SCSI/IDE-fout

11:36:23 #36 TRANSFER -18 File WriterStatus.cpp, Line 152
Kon EndTrack niet uitvoeren

11:36:23 #37 CDR -201 File WriterStatus.cpp, Line 155
Ongeldige schrijfstatus

11:36:23 #38 TRANSFER -18 File WriterStatus.cpp, Line 155
Kon EndTrack niet uitvoeren

11:36:33 #39 Text 0 File Scsicmd.cpp, Line 1782
SCSI timeout (a)

11:36:33 #40 SCSI -1000 File Cdrdrv.cpp, Line 1124
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x044D07C0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0xE6 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
ModeSel: 0x00 0x00 0x00 0xFF 0xBF 0xFF 0x7F 0xDD
0xFF 0xDC 0xBF 0xFD 0xFF 0xDF 0xBF 0x75
0x00 0xFF 0x6B 0xD5 0xFB 0xF9 0x00 0x96
0xFB 0x7B 0xB7 0xFD 0xEF 0x75 0x9A 0xFF
0x5A 0xF9 0xFF 0x5F 0xEF 0xFE 0xFF 0xF7
0xFB 0xEF 0x6E 0xF7 0x7E 0x55 0xFB 0xFD
0xEF 0xFD 0xF6 0xDE 0xAF 0xFF 0xFF 0xBF
0xBE 0x5D 0x7E 0xFD 0x74 0x61 0x3A 0x20
0x30 0x78 0x30 0x30 0x20 0x30 0x78 0x300x500x65

11:36:33 #41 CDR -1175 File Cdrdrv.cpp, Line 1150
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0xE6 0x00 0x00 0x00


11:36:33 #42 SCSI -1000 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x044D07C0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0xE6 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00
ModeSel: 0x00 0x00 0x00 0xFF 0xBF 0xFF 0x7F 0xDD
0xFF 0xDC 0xBF 0xFD 0xFF 0xDF 0xBF 0x75
0x00 0xFF 0x6B 0xD5 0xFB 0xF9 0x00 0x96
0xFB 0x7B 0xB7 0xFD 0xEF 0x75 0x9A 0xFF
0x5A 0xF9 0xFF 0x5F 0xEF 0xFE 0xFF 0xF7
0xFB 0xEF 0x6E 0xF7 0x7E 0x55 0xFB 0xFD
0xEF 0xFD 0xF6 0xDE 0xAF 0xFF 0xFF 0xBF
0xBE 0x5D 0x7E 0xFD 0x74 0x61 0x3A 0x20
0x30 0x78 0x30 0x30 0x20 0x30 0x78 0x300x500x65

11:36:33 #43 CDR -1000 File WriterStatus.cpp, Line 194
SCSI/IDE-fout

11:36:33 #44 TRANSFER -19 File WriterStatus.cpp, Line 194
Kon Fixatie niet uitvoeren

11:36:33 #45 Text 0 File WriterStatus.cpp, Line 203
falling back to disc fixation

11:36:43 #46 Text 0 File Scsicmd.cpp, Line 1782
SCSI timeout (a)

11:36:43 #47 SCSI -1000 File Cdrdrv.cpp, Line 1124
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x044D06A0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x40 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

11:36:43 #48 CDR -1175 File Cdrdrv.cpp, Line 1150
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x40 0x00 0x00 0x00


11:36:43 #49 SCSI -1000 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x044D06A0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x40 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

11:36:43 #50 CDR -1000 File WriterStatus.cpp, Line 194
SCSI/IDE-fout

11:36:43 #51 TRANSFER -19 File WriterStatus.cpp, Line 194
Kon Fixatie niet uitvoeren

11:36:53 #52 Phase 38 File dlgbrnst.cpp, Line 1163
Brandproces mislukt met 8x (1200 kb/s)

11:36:53 #53 Text 0 File Scsicmd.cpp, Line 271
SCSI not using temporary buffers

11:36:53 #54 Text 0 File Scsicmd.cpp, Line 294
10 out of 10 temporary buffers allocated

11:36:53 #55 Text 0 File WinNeroThreads.cpp, Line 909
Thread priorities:
Pri. name -> class / level
0. Idle -> 32 / -15 = default
1. Background -> 32 / -2 = default
2. Normal -> 32 / 0 = default
3. HighIdle -> 128 / -1 = default
4. High -> 128 / 0 = default
5. Higher -> 128 / 1 = default
6. Realtime -> 128 / 2 = default

11:37:05 #56 Text 0 File Scsicmd.cpp, Line 1782
SCSI timeout (a)

11:37:05 #57 SCSI -1000 File Cdrdrv.cpp, Line 1124
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

11:37:05 #58 CDR -1175 File Cdrdrv.cpp, Line 1150
Internal trace
Command timeout occured: timeout 1000ms, counter 1
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00


11:37:05 #59 SCSI -1000 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

11:37:15 #60 Text 0 File Scsicmd.cpp, Line 1782
SCSI timeout (a)

11:37:15 #61 SCSI -1000 File Cdrdrv.cpp, Line 1124
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

11:37:15 #62 CDR -1175 File Cdrdrv.cpp, Line 1150
Internal trace
Command timeout occured: timeout 10000ms, counter 1
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00


11:37:15 #63 SCSI -1000 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x00 (0x02, SCSI_PENDING)
HA-Status 0x00 (0x00, OK)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x1E 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00

11:37:15 #64 CDR -1000 File Burncd.cpp, Line 818
SCSI/IDE-fout


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 16-5-98 4:01:00
File 'IoSubsys\NEROCD95.VXD': Ver=4, 0, 0, 8, size=30887 bytes, created 25-4-00 16:52:56
File 'IoSubsys\CDR4VSD.VXD': Ver=2.5 (089), size=197984 bytes, created 10-4-00 7:10:56
File 'PTUDF.VXD': Ver=Version 1.5.170, size=72347 bytes, created 12-9-00 0:48:40
File 'IoSubsys\PTUDFDR.VXD': Ver=1.5.170, size=42657 bytes, created 12-9-00 0:47:58
File 'PTUDFAPP.EXE': Ver=1, 5, 0, 170, size=274432 bytes, created 12-9-00 1:08:16
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 16-5-98 4:01:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.1998, size=24406 bytes, created 16-5-98 4:01:00

woensdag 8 augustus 2001 18:06

Acties:
  • Ivo
  • Registratie: Juni 2001
  • Laatst online: 14-01-2025

Ivo

Ik heb dus precies het zelfde met nero, CloneCd en CDRWIN. CDRWIN geeft aan dat ik geen apparaten in de SCSI of IDE bus heb zitten. Dat heb ik wel, of het ding is eruit geflikkerd. Ik heb alle draadjes nageken en alles zit er nog in.

Wtf moet ik hiermee? :?

woensdag 8 augustus 2001 18:51

Acties:
  • Ivo
  • Registratie: Juni 2001
  • Laatst online: 14-01-2025

Ivo

Ik heb het al door. Je moet de bus drivers opnieuw installeren. Toen ik dat had gedaan had ik wel conflicten. De VIA BM DMA Controller had een conflict met de Primaire IDE bus controller. Toen heb ik de IDE ingesteld op PIO ipv DMA en zie:

:) :9 Ik kan weer fikken :9 :)
Reageer