Voor de liefhebbers, linux's dmesg:
Linux version 2.2.18 (root@riant) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #1 SMP Mon Jan 15 20:21:10 CET 2001
Intel MultiProcessor Specification v1.1
Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #1 Pentium(tm) Pro APIC version 17
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Detected 166195 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 330.95 BogoMIPS
Memory: 63184k/65536k available (972k kernel code, 424k reserved, 884k data, 72k init)
Dentry hash table entries: 8192 (order 4, 64k)
Buffer cache hash table entries: 65536 (order 6, 256k)
Page cache hash table entries: 16384 (order 4, 64k)
VFS: Diskquotas version dquot_6.4.0 initialized
512K L2 cache (4 way)
CPU: L2 Cache: 512K
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
512K L2 cache (4 way)
CPU: L2 Cache: 512K
per-CPU timeslice cutoff: 99.92 usecs.
CPU1: Intel Pentium Pro stepping 07
calibrating APIC timer ...
..... CPU clock speed is 166.2084 MHz.
..... system bus clock speed is 66.4832 MHz.
Booting processor 0 eip 2000
Calibrating delay loop... 331.77 BogoMIPS
Intel machine check reporting enabled on CPU#0.
512K L2 cache (4 way)
CPU: L2 Cache: 512K
OK.
CPU0: Intel Pentium Pro stepping 07
Total of 2 processors activated (662.73 BogoMIPS).
enabling symmetric IO mode... ...done.
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-13, 2-17, 2-18, 2-20, 2-21, 2-22, 2-23 not connected.
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00170011
....... : max redirection entries: 0017
....... : IO APIC version: 0011
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 0 0 0 0 0 1 1 59
02 0FF 0F 0 0 0 0 0 1 1 51
03 000 00 0 0 0 0 0 1 1 61
04 000 00 0 0 0 0 0 1 1 69
05 000 00 0 0 0 0 0 1 1 71
06 000 00 0 0 0 0 0 1 1 79
07 000 00 0 0 0 0 0 1 1 81
08 000 00 0 0 0 0 0 1 1 89
09 000 00 0 0 0 0 0 1 1 91
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 0 0 0 0 0 1 1 99
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 0 0 0 0 0 1 1 A1
0f 000 00 0 0 0 0 0 1 1 A9
10 0FF 0F 1 1 0 1 0 1 1 B1
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 0FF 0F 1 1 0 1 0 1 1 B9
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 2
IRQ1 -> 1
IRQ3 -> 3
IRQ4 -> 4
IRQ5 -> 5
IRQ6 -> 6
IRQ7 -> 7
IRQ8 -> 8
IRQ9 -> 9
IRQ10 -> 19
IRQ11 -> 16
IRQ12 -> 12
IRQ14 -> 14
IRQ15 -> 15
.................................... done.
checking TSC synchronization across CPUs: passed.
PCI: PCI BIOS revision 2.10 entry at 0xf0460
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: 00:00 [8086/1237]: Passive release enable (00)
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 65536 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
PIIX3: IDE controller on PCI bus 00 dev 09
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb : pio
ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:pio, hdd : pio
hda: GCD-R580B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 8X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
sym53c8xx: at PCI bus 0, device 9, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c875 detected with Symbios NVRAM
sym53c875-0: rev 0x3 on pci bus 0 device 9 function 0 irq 10
sym53c875-0: Symbios format NVRAM, ID 7, Fast-20, Parity Checking
scsi0 : sym53c8xx-1.7.1-20000726
scsi : 1 host.
Vendor: QUANTUM Model: XP34550W Rev: LXY4
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 4, lun 0
scsi : detected 1 SCSI disk total.
sym53c875-0-<4,*>: FAST-5 SCSI 5.0 MB/s (200 ns, offset 16)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 8890760 [4341 MB] [4.3 GB]
3c59x.c 15Sep00 Donald Becker and others
http://www.scyld.com/network/vortex.html
Partition check:
sda: sda1 sda2
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 72k freed
Adding Swap: 147788k swap-space (priority -1)
Ja, op het moment ff 64MB RAM want ik heb nog een PPro als server die dat geheugen ff mot hebben.