SORRY VOOR DE LANGE POST MAAR DIT HEB IK GEVONDEN OP WWW.OVERCLOCKERS.COM!!
Celeron II 700 Results....
Total Entries in Database for Celeron II 700 - 14
Average overclocked speed - 912 Mhz
1050 2.10 SL4P8 Malay 46 P3V4X Runnig stable at 1050 with golden orb
1050 1.80 SL4E6 Malaysia 38 Abit BX133 RAID Breezing 1050 with a Golden Orb. Needs better cooling to go any further but this will do nicely. A bargain solid setup
1050 1.80 SL4E6 Malaysia 38 Abit BX133 RAID Breezing 1050 with a Golden Orb. Needs better cooling to go any further but this will do nicely. A bargain solid setup
935 1.90 SL4P2 Malaysia 47 Abit BE-6II Running a stable 935@90Mhz FSB with original Intel in-a-box Fan Heatsink. Any FSB above 90Mhz eventually crashes using whatever settings. I'm using Win2kPro. Stability was tested by encoding MP3's and playing ST Elite Force) 235 above 700 is great though since I couldn't get my last Celeron 400sepp any higher than 450@75! So this means almost 500Mhz more, plus SSE extensions! I'm happy with this CPU...
935 1.90 SL4P2 Malaysia 47 Abit BE-6II Running a stable 935@90Mhz FSB with original Intel in-a-box Fan Heatsink. Any FSB above 90Mhz eventually crashes using whatever settings. I'm using Win2kPro. Stability was tested by encoding MP3's and playing ST Elite Force) 235 above 700 is great though since I couldn't get my last Celeron 400sepp any higher than 450@75! So this means almost 500Mhz more, plus SSE extensions! I'm happy with this CPU...
903 1.80 SL4E6 Malay 42 ABIT BP6 Using Neo S370 adapter, Global Win Fep32 HS, 3 case fans.
903 1.80 SL4E6 Malay 42 ABIT BP6 Using Neo S370 adapter, Global Win Fep32 HS, 3 case fans.
875 1.65 SL4P8 Malay 47 Gigabyte BX-2000 Running with 128MB PC100, TNT2 Ultra. Cooling courtesy of bog-standard paste and coolermaster. sink/fan. Note: Golden Orbs are crap if you ask me.
875 1.65 SL4P8 Malay 47 Gigabyte BX-2000 Running with 128MB PC100, TNT2 Ultra. Cooling courtesy of bog-standard paste and coolermaster. sink/fan. Note: Golden Orbs are crap if you ask me.
875 1.75 SL4P8 Malaysia 49 Asus P3B-F A real disapointment. I am sure it would do 90 FSB but beyond 100 it won't do it. I have tried it with a 50 Watt Peltier as well can break 875 Mhz.
871 1.70 SL4P8 Malay 50 Asus CUSL2 Doesn't boot at 100, and CUSL2 doesn't have manual PCI divider...
871 1.70 SL4P8 Malay 50 Asus CUSL2 Doesn't boot at 100, and CUSL2 doesn't have manual PCI divider...
787 1.80 SL48F Malay 40 Asus P2B HW rev 1.02 Used a MSI MS6905 Slocket, a regular cooler fan, and BIOS v1012. Board won't go lower than 1.80V. tried 871 Mhz as well, but Intel ATA was unstable @ 83/2Mhz even with DMA turned off. Tried a Promise Ultra66 as well, did do DMA, but a bit unstable.. Wouldn't POST 1050Mhz@1.80/1.85/190 Volt (Gonna try to get a slocket with Voltage regulator for the 1.65V & buy an Orb orso..)
787 1.80 SL48F Malay 40 Asus P2B HW rev 1.02 Used a MSI MS6905 Slocket, a regular cooler fan, and BIOS v1012. Board won't go lower than 1.80V. tried 871 Mhz as well, but Intel ATA was unstable @ 83/2Mhz even with DMA turned off. Tried a Promise Ultra66 as well, did do DMA, but a bit unstable.. Wouldn't POST 1050Mhz@1.80/1.85/190 Volt (Gonna try to get a slocket with Voltage regulator for the 1.65V & buy an Orb orso..)
blij?
:strip_icc():strip_exif()/u/18846/spun.jpg?f=community)
