/u/69937/dr2.png?f=community)
(ik had het hele verhaal al eens in het engels ergens staan, vertaling wordt alleen maar verwarrender, vandaar)
OK here’s the situation. I am kind of a newbie on the “windows 2000 server’ platform. I know my way around with Windows NT4. I do have (a lot of) questions before I can implement the new servers……
I no have at 4 (remote)locations 4 Windows NT4 servers running, all of them are PDC’s with their own domains; DOM1, with 1 NT4 server and about 25 clients, all Win9x and WinME, some Win2000 prof. In total there are no more then 50 users.
DOM2; 1 NT4 server with 6 Win9x/WinME clients,
DOM3; 1 NT4 server with 6 Win9x/WinME clients, & DOM4; 1 NT4 server with 6 Win9x/WinME clients,). The domains are connected to each other through a VPN (WINS and trust relationships). There is no actual need for users to share all the files from the 4 locations or the need for only one central file server. A lot of files are used locally anyhow. And I do not want to depend on the VPN connection too much. But there might be a need for some files.
The whole idea about domains (and DNS) in Win2K server is based on the ‘internet model’(as I understand it) (domains are now always with an extension etc.). For us there is no actual need for that, the whole internet is out of the office anyhow (ISP), our current domain (company.nl) is also stationed at the ISP, so not usable as the internal network domain I would say.
I am not going to upgrade the NT servers, because hew hardware is going to be placed anyway, so this is a good change to go for a complete new structure. (There is no so much to upgrade anyhow, not so many shares and printers etc.)
SO I want to start from scratch with the 2000 server environment (AD, WINS, DNS??, etc.)
I did some reading, and do not know what the best solution is for me. For a start; should I go for 1 domain, and make the remote locations a sub domain with their own Win2k Servers (DC’s)? Or should I stick with 4 different domains and 4 Win2K servers (DC’s).
Should the Win2K serves run in native mode? (Over a period from a week I want to replace all the NT servers with 2k) Or should it run in mixed mode. (I do have only Win9X and WinME and some Win2000 clients.)
Should I make one tree for all the locations? So headquarter is; company.nl and the remote locations are loc1.company.nl, loc2.company.nl & loc3.company.nl. Or should I go for 4 forests between the 4 locations and let them all have their own domain? (company1.nl, company2.nl, company3.nl and company4.nl)
I do no have the need for a lot of tree’s, one root (per location) is sufficient. (remember; I do not have to ‘go public’ with the domain(name)s).
And then in either one of the situations, how do I ‘connect all the 4 servers with each other? Do I use WINS or DNS or both? A (hardware/stand alone) router on all the 4 location takes care of the VPN connections and the routing).
What about the IP addresses? Now I have the following: LOC1 has 192.168.1.x (255.255.255.0) range, LOC2 has 192.168.2.x, LOC3 has: 192.168.3.x and LOC4; 192.168.4.x.
Should I choose a different subnet to make the VPN connection more easy? Something like: LOC1: 192.168.10.x (255.255.0.0), LOC2: 192.168.20.x (255.255.0.0) etc.?
Well you see, a lot of questions still, I hope it’s understandable en that someone can help me here…….thanks ahead!!
OK here’s the situation. I am kind of a newbie on the “windows 2000 server’ platform. I know my way around with Windows NT4. I do have (a lot of) questions before I can implement the new servers……
I no have at 4 (remote)locations 4 Windows NT4 servers running, all of them are PDC’s with their own domains; DOM1, with 1 NT4 server and about 25 clients, all Win9x and WinME, some Win2000 prof. In total there are no more then 50 users.
DOM2; 1 NT4 server with 6 Win9x/WinME clients,
DOM3; 1 NT4 server with 6 Win9x/WinME clients, & DOM4; 1 NT4 server with 6 Win9x/WinME clients,). The domains are connected to each other through a VPN (WINS and trust relationships). There is no actual need for users to share all the files from the 4 locations or the need for only one central file server. A lot of files are used locally anyhow. And I do not want to depend on the VPN connection too much. But there might be a need for some files.
The whole idea about domains (and DNS) in Win2K server is based on the ‘internet model’(as I understand it) (domains are now always with an extension etc.). For us there is no actual need for that, the whole internet is out of the office anyhow (ISP), our current domain (company.nl) is also stationed at the ISP, so not usable as the internal network domain I would say.
I am not going to upgrade the NT servers, because hew hardware is going to be placed anyway, so this is a good change to go for a complete new structure. (There is no so much to upgrade anyhow, not so many shares and printers etc.)
SO I want to start from scratch with the 2000 server environment (AD, WINS, DNS??, etc.)
I did some reading, and do not know what the best solution is for me. For a start; should I go for 1 domain, and make the remote locations a sub domain with their own Win2k Servers (DC’s)? Or should I stick with 4 different domains and 4 Win2K servers (DC’s).
Should the Win2K serves run in native mode? (Over a period from a week I want to replace all the NT servers with 2k) Or should it run in mixed mode. (I do have only Win9X and WinME and some Win2000 clients.)
Should I make one tree for all the locations? So headquarter is; company.nl and the remote locations are loc1.company.nl, loc2.company.nl & loc3.company.nl. Or should I go for 4 forests between the 4 locations and let them all have their own domain? (company1.nl, company2.nl, company3.nl and company4.nl)
I do no have the need for a lot of tree’s, one root (per location) is sufficient. (remember; I do not have to ‘go public’ with the domain(name)s).
And then in either one of the situations, how do I ‘connect all the 4 servers with each other? Do I use WINS or DNS or both? A (hardware/stand alone) router on all the 4 location takes care of the VPN connections and the routing).
What about the IP addresses? Now I have the following: LOC1 has 192.168.1.x (255.255.255.0) range, LOC2 has 192.168.2.x, LOC3 has: 192.168.3.x and LOC4; 192.168.4.x.
Should I choose a different subnet to make the VPN connection more easy? Something like: LOC1: 192.168.10.x (255.255.0.0), LOC2: 192.168.20.x (255.255.0.0) etc.?
Well you see, a lot of questions still, I hope it’s understandable en that someone can help me here…….thanks ahead!!
:strip_icc():strip_exif()/u/83667/DDZ_Maliebaan_70px.jpg?f=community)
Dit topic is gesloten.