[Gentoo] ALSA op nec versa p520 met intel i810

[Maxonic]

Er valt veel over te vinden op het internet maar zelfs met:

• de tips op het gentoo forum
• de gentoo alsa guide
• de alsa howto van de gentoo wiki pages
• grote vriend google
• oplossingen voor vergelijkbare problemen op GoT

krijg ik het niet voor elkaar om mijn geluidkaart wakker te schudden.

Op zich gaat alles zoals het hoort, op een vrijwel essentieel puntje na, ik hoor niks

lspci vertelt over de soundcard:

0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)

lsmod:

snd_pcm_oss 37920 0
snd_mixer_oss 13312 1 snd_pcm_oss
snd_seq_oss 24640 0
snd_seq_midi_event 3648 1 snd_seq_oss
snd_seq 34960 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 5004 2 snd_seq_oss,snd_seq
snd_intel8x0 21888 2
snd_ac97_codec 53048 1 snd_intel8x0
snd_pcm 54084 4 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 15812 3 snd_seq,snd_pcm
snd 32036 11 snd_pcm_oss,snd_mixer_oss,snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
snd_page_alloc 5572 2 snd_intel8x0,snd_pcm

De inhoud van mij /etc/modules.d/alsa

alias snd-card-0 snd-intel8x0
alias sound-slot-0 snd-intel8x0
alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-os

De inhoud van /etc/devfsd.conf

LOOKUP snd MODLOAD ACTION snd
LOOKUP dsp MODLOAD
LOOKUP mixer MODLOAD
LOOKUP midi MODLOAD
REGISTER sound/.* PERMISSIONS root.audio 660
REGISTER snd/.* PERMISSIONS root.audio 660

/etc/init.d/alsasound start geeft geen fouten weer

more /etc/group | grep audio geeft:
audio::18:root,Sander
(Sander is mijn useraccount, maar ook als root ingelogged krijg ik geen geluid)

/dev/dsp bestaat

In de mixer staan de Master en PCM op 100% volume unmuted

alsaplayer -o alsa -d plug:dmix test.mp3 & start speler, scope doet het alleen geen geluid[/]

aoss mpg123 test.mp3 Geeft als foutmelding:
No default libao driver available.

XMMS start maar of ik nou ALSA of OSS als driver kies, hij reageert altijd hetzelfde.
Als ik op play druk doet hij niks, maar ik moet opnieuw een bestand selecteren.
Wel ziet hij de Intel drivers.

Beste linux orakels. wat zie ik over het hoofd?

[smokalot]

wat zegt dmesg, en wat is de output van ls -l /proc/asound/ ?

[Maxonic]

Ik heb vanmiddag het één en ander veranderd en nu is het zo dat KDE gewoon systeemgeluidjes afspeelt. XMMS speelt, als ik als output plugin ARTS neem, ogg bestanden en wav bestanden af maar geen mp3. Als ik als output plugin ALSA neem speelt hij de ogg bestanden gewoon af (zo te zien) maar ik hoor dan niets. Aan mp3tjes begint XMMS niet eens.

XMMS heeft de volgende plugins:

• MAD MPEG Decoder (libxmmsmad)
• MikMod Player (libmikmod)
• MPEG Leyer 1/2/3 (libmpg123)
• Ogg Vorbis Player (libvorbis)

/dev/dsp bestaat inmiddels niet meer

alsaplayer -o alsa -d plug:dmix test.mp3 &
Dit werkt nu, en speelt het MP3tje dus hoorbaar af.

Ik heb oss support verwijderd en ALSA nu als module draaien.

lsmod zegt nu:

code:

snd_intel8x0           21440  0
snd_ac97_codec         49144  1 snd_intel8x0
snd_pcm                53188  2 snd_intel8x0,snd_ac97_codec
snd_timer              15556  1 snd_pcm
snd_page_alloc          5572  2 snd_intel8x0,snd_pcm

code:

bash-2.05b# dmesg
Linux version 2.6.11-gentoo-r6 (root@s031290) (gcc version 3.3.5-20050130 (Gentoo Linux 3.3.5.20050130-r1, ssp-3.3.5.20050130-1, pie-8.7.7.1)) #3 SMP Sat Apr 30 16:32:37 CEST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
 BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001f6e0000 (usable)
 BIOS-e820: 000000001f6e0000 - 000000001f6eb000 (ACPI data)
 BIOS-e820: 000000001f6eb000 - 000000001f700000 (ACPI NVS)
 BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
 BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
 BIOS-e820: 00000000ff800000 - 00000000ff900000 (reserved)
 BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
0MB HIGHMEM available.
502MB LOWMEM available.
On node 0 totalpages: 128736
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 124640 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 NEC                                   ) @ 0x000f6970
ACPI: RSDT (v001 NEC    ND000075 0x00000001 MSFT 0x0100000e) @ 0x1f6e3261
ACPI: FADT (v001 NEC    ND000075 0x00000001 MSFT 0x0100000e) @ 0x1f6eaf64
ACPI: BOOT (v001 NEC    ND000075 0x00000001 MSFT 0x0100000e) @ 0x1f6eafd8
ACPI: SSDT (v001 INTEL  CPU0CST  0x00000001 INTL 0x20020725) @ 0x1f6e363a
ACPI: SSDT (v001  INTEL  EISTRef 0x00002000 INTL 0x20020725) @ 0x1f6e3295
ACPI: DSDT (v001    NEC ND000075 0x00000001 MSFT 0x0100000e) @ 0x00000000
Allocating PCI resources starting at 20000000 (gap: 20000000:dec10000)
Built 1 zonelists
Kernel command line: root=/dev/hda4 video=vesafb:mtrr,ywrap,1280x1024-16 splash=silent,theme:default
fbsplash: silent
fbsplash: theme default
__iounmap: bad address c00fffd9
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01400000)
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1399.123 MHz processor.
Using tsc for high-res timesource
Speakup v-2.00 CVS: Wed Mar 2 20:22:02 EST 2005 : initialized
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 486768k/514944k available (2435k kernel code, 27484k reserved, 651k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2760.70 BogoMIPS (lpj=1380352)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Couldn't initialize miscdevice /dev/synth.
CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 0000018000000000 00000000
CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040 00000180 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0420)
CPU0: Intel(R) Pentium(R) M processor 1400MHz stepping 05
per-CPU timeslice cutoff: 2925.26 usecs.
task migration cache decay timeout: 3 msecs.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
CPU0 attaching sched-domain:
 domain 0: span 1
  groups: 1
  domain 1: span 1
   groups: 1
checking if image is initramfs... it is
Freeing initrd memory: 19402k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9c2, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5 10)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *10)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *10)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *10)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: Power Resource [PFAN] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically.  If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device().  As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior.  If this argument makes the device work again,
** please email the output of "lspci" to [e-mail]
** so I can fix the driver.
NET: Registered protocol family 23
Simple Boot Flag at 0x37 set to 0x1
inotify device minor=63
Squashfs 2.1 (released 2004/12/10) (C) 2002-2004 Phillip Lougher
NTFS driver 2.1.22 [Flags: R/W].
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debugenabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 855 Chipset.
agpgart: Maximum main memory to use for agp memory: 430M
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xd8000000
vesafb: Intel Corporation, Intel(r)852MG/852MGE/855MG/855MGE Graphics Controller, Hardware Version 0.0 (OEM: Intel(r)852MG/852MGE/855MG/855MGE Graphics Chip Accelerated VGA BIOS)
vesafb: VBE version: 3.0
vesafb: hardware doesn't support DCC transfers
vesafb: monitor limits: vf = 0 Hz, hf = 0 kHz, clk = 0 MHz
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 160x64
fbsplash: console 0 using theme 'default'
fbsplash: switched splash state to 'on' on console 0
vesafb: framebuffer at 0xd8000000, mapped to 0xe0180000, using 5120k, total 8000k
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
intelfb: Version 0.9.2
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 10 (level, low) -> IRQ 10
intelfb: Cannot reserve FB region.
Trying to free nonexistent resource <d0000000-d007ffff>
Trying to free nonexistent resource <d8000000-dfffffff>
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
ALPS Touchpad (Glidepoint) detected
  Enabling hardware tapping
input: AlpsPS/2 ALPS TouchPad on isa0060/serio4
io scheduler noop registered
io scheduler deadline registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 10 (level, low) -> IRQ 10
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: HITACHI_DK23EA-40, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: UJDA740 DVD/CDRW, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
CAPI Subsystem Rev 1.1.2.8
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
EISA: Detected 0 cards.
Advanced Linux Sound Architecture Driver Version 1.0.8 (Thu Jan 13 09:39:32 2005 UTC).
ALSA device list:
  No soundcards found.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 17
ReiserFS: hda4: found reiserfs format "3.6" with standard journal
ReiserFS: hda4: using ordered data mode
ReiserFS: hda4: journal params: device hda4, size 8192, journal first block 18,max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda4: checking transaction log (hda4)
ReiserFS: hda4: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 204k freed
fbsplash: switching to verbose mode
Adding 506036k swap on /dev/hda3.  Priority:-1 extents:1
NTFS volume version 3.1.
NTFS-fs error (device hda1): load_system_files(): Volume is dirty.  Mounting read-only.  Run chkdsk and mount in Windows.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Real Time Clock Driver v1.12
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.0: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 10, io base 0x1820
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.1: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 10, io base 0x1840
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using uhci_hcd and address 2
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:1d.2: UHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 10, io base 0x1860
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usbcore: registered new driver hiddev
input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:1d.7: EHCI Host Controller
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 10, pci mem 0xe8080000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 1-1: USB disconnect, address 2
usb 4-2: new high speed USB device using ehci_hcd and address 3
usb 1-1: new low speed USB device using uhci_hcd and address 3
SCSI subsystem initialized
Initializing USB Mass Storage driver...
input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1f.5 to 64
AC'97 1 does not respond - RESET
AC'97 1 access is not valid [0xffffffff], removing mixer.
Unable to initialize codec #1
intel8x0_measure_ac97_clock: measured 49562 usecs
intel8x0: clocking to 48000
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 10 (level, low) -> IRQ 10
Yenta: CardBus bridge found at 0000:02:07.0 [1033:81f8]
Yenta: ISA IRQ mask 0x0898, PCI irq 10
Socket status: 30000006
ACPI: PCI interrupt 0000:02:07.1[B] -> GSI 5 (level, low) -> IRQ 5
Yenta: CardBus bridge found at 0000:02:07.1 [1033:81f8]
Yenta: ISA IRQ mask 0x0898, PCI irq 5
Socket status: 30000006
Intel(R) PRO/1000 Network Driver - version 5.6.10.1-k2
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI interrupt 0000:02:09.0[A] -> GSI 10 (level, low) -> IRQ 10
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
  Vendor: USB 2.0   Model: Storage Device    Rev: 0111
  Type:   Direct-Access                      ANSI SCSI revision: 00
usb-storage: device scan complete
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
SCSI device sda: 488396880 512-byte hdwr sectors (250059 MB)
sda: assuming drive cache: write through
SCSI device sda: 488396879 512-byte hdwr sectors (250059 MB)
sda: assuming drive cache: write through
 sda: sda1
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03ef200(lo)

Rond regel 263 wordt het denk ik interessant.

code:

bash-2.05b#  ls -l /proc/asound/
total 1
lrwxrwxrwx  1 root root 5 Apr 30 18:37 I82801DBICH4 -> card0
dr-xr-xr-x  9 root root 0 Apr 30 18:37 card0
-r--r--r--  1 root root 0 Apr 30 18:37 cards
-r--r--r--  1 root root 0 Apr 30 18:37 devices
-r--r--r--  1 root root 0 Apr 30 18:37 pcm
-r--r--r--  1 root root 0 Apr 30 18:37 timers
-r--r--r--  1 root root 0 Apr 30 18:37 version

[Verwijderd]

Heb je al geprobeert je drivers te downgraden? Had een soortgelijk probleem met een andere geluidskaart. Heb het opgelost door alsa-libs en alsa-headers te downgraden naar een versie lager dan 0.8, dus 0.7 of 0.6.
En vergeet niet om "oss" in je use flags te zetten als je je alsa-driver emerged..
Succes.