Geforce DDR & Athlon

Pagina: 1
Acties:
  • 112 views sinds 30-01-2008
  • Reageer

  • star-saber
  • Registratie: Maart 2000
  • Laatst online: 28-08 19:22
als sideband en/of agp2x aanstaat dan zie ik
groote veranderingen in m'n 3.3 volt van 3.09 tot 3.79 volt
staan ze uit dan blijft het nagenoeg 3.3 volt
kan dit m'n crashes verklaren wanneer ze aanstaan?

config:
Athlon 750
256 MB pc133
msi k7pro
adaptec 2940UW
Sblive
3com net-pci
ide disabled

iemand een idee
voeding is een aopen 300watt voeding

alvast bedankt

email:Star-saber@xs4all.nl

  • WarMaster
  • Registratie: Juni 1999
  • Niet online

WarMaster

Nosce te ipsum

Hmmm... Das heel weird.

Ik heb ook wel eens vaker gemerkt bij die Asus kaarten. Dat ze bij de SmartDoctor soms rare meldingen geven over de 3.3 Volt voeding.

Juist wanneer de SmartDoctor aanstaat crasht ie, maar anders nooit.

Gewoon de probe uitzetten zodat je al dat geneuzel niet meer ziet over 3.3 Volt.

Kijken of het dan beter is.

We live in a primitive time don't we, neither savage nor wise. Half measures are the curse of it; any rational society would either kill me or put me to some use.


  • star-saber
  • Registratie: Maart 2000
  • Laatst online: 28-08 19:22
het programma pc alert III van msi geeft die waardes

zou aan de voeding kunnen liggen
denk ik

Verwijderd

Na lang uitvogelen, bleek het ook bij mij aan mijn agp 2x te liggen, hij start heel moeilijk een q3 game op en na een paar minuten loopt UT vast, na heel wat gevloek, toch ff op agp 1x gezet en twerkte allemaal als een tiet. Geen Enkele crash meer gehad, kep ook een athlon+geforce DDR Asus+sblive+300 Watt voeding +MSI 6167, wel mijn SBA enabled, maar dan maar 2 frames minder hoor!! Hij speelt nu lekker, misschien dat je dit gezeur niet hebt op een ander moederbord aangezien die van jou ook MSI is (hopelijk heeft Abit KA7 niet dit probleem)

0of9

  • metoo
  • Registratie: November 1999
  • Laatst online: 06-06-2022
bij mij was dat probleem opgelost met een andere voeding

Epox8RDA+ XPThorton2000+@3200+ Radeon9800SE@Pro Plextor 12/10/32A 80GB 7200 8MB XPpro


Verwijderd

Check this out! Twordt echt tijd voor een andere chipset


The GeForce has stability problems when using Athlon motherboards based on AMD's chipset and AGP2X, due to 'poor filtering on the AGP strobe line'. AMD have released a new version of their motherboard chipset which fixes this problem and this is now being implemented into motherboards. NVIDIA have released drivers (3.62 onwards) that will disable AGP2X if an Athlon motherboard with an AMD chipset is detected. However, some system configurations do not display this instability, and on these motherboards you can use the athlon2xon.reg registry file to force AGP2X - available here: http://web.ukonline.co.uk/christopher.hill/files/athlon2xon.reg
If you have problems after enabling this, use the athlon2xoff.reg registry file to disable it again - available here: http://web.ukonline.co.uk/christopher.hill/files/athlon2xoff.reg
This will enable the AGP2X support no matter what motherboard and chip you have. Creative have also released a utility which enables you to force AGP2X support on any motherboard - see the 'What is the status of AGP sidebanding in the latest drivers?' question in this FAQ for more details.

I received the following information from from Louis-Philippe


Oja, dit komt uit 1 van de Geforce FAQ's
Pagina: 1