Toon posts:

[Upgrade RAM] Bios: ok, windows xp: zwart scherm

Pagina: 1
Acties:

Verwijderd

Topicstarter
Hey,

Ik heb mijn computer proberen up te graden met 128 Mb. In het beginscherm was alles ok, hij update het totale geheugen naar 3xx Mb (i.p.v. 266 Mb). En wanneer Windows Xp opstartscherm moest komen kwam er een zwart scherm en bleef het zwart.

Weten jullie misschien raad?

Verwijderd

Tja, iets meer info in een openingspost zal je niet misstaan, zoals de specs van je systeem, wat voor geheugen etc. en wat je al geprobeerd hebt. Zoekfunctie gebruikt? FAQ gelezen? etc.

Verwijderd

Topicstarter
Zoekfunctie heb ik gebruikt, aantal topics gevonden met hetzelfde probleem maar zonder oplossing.

Specs:
Computer:
Besturingssysteem Microsoft Windows XP Professional
OS Service Pack Service Pack 2
Internet Explorer 6.0.2900.2180 (IE 6.0 SP2)
DirectX 4.09.00.0904 (DirectX 9.0c)

Moederbord:
CPU Type Intel Pentium IIIE, 800 MHz (6 x 133)
Moederbordnaam ECS P6BAP-A+ (2 ISA, 4 PCI, 1 AGP, 3 DIMM)
Moederbord Chipset VIA VT82C693A Apollo Pro133
Systeemgeheugen 256 MB (SDRAM)
BIOS Type Award Modular (06/22/00)
Communicatiepoort Communicatiepoort (COM1)
Communicatiepoort Communicatiepoort (COM2)
Communicatiepoort Printerpoort (LPT1)

Scherm:
Video kaart NVIDIA RIVA TNT2 Model 64/Model 64 Pro (32 MB)
3D-Versneller nVIDIA RIVA TNT2 M64
Monitor Hyundai HL-7770RD (8406944)

Multimedia:
Geluidskaart C-Media CMI8738/C3DX Audio Device

Opslag:
IDE apparaat VIA Bus Master IDE Controller
Diskettestation Diskettestation
Harde schijf Maxtor 6E040L0 (40 GB, 7200 RPM, Ultra-ATA/133)
Optische Station 50X CD-ROM (50x CD-ROM)
Optische Station LITE-ON LTR-40125S (40x/12x/48x CD-RW)
SMART Status harde schijf OK

Moederbord boekje:
For this mainboard, you must use 1368-pin 3.3V non-buffered Dual In-Line Memory Modules (DIMMs). The memory chips must be standard SDRAM.
The memory bus can run at 66 Mhz, 100 Mhz or 133 Mhz. If you install memory chips that oparatse over a 66 Mhz bus, you must install memory chips that operate at 66 Mhz. If your processor operates over a 100 Mhz system bus, you can instal memory chips that operate at 66 or 100 Mhz. If your processor operates over a 133 Mhz system bus, you can install PC-100 or PC133 memory that operates over a 100 or 133 Mhz bus.

You must install at least one memory module and the first memory module should be installed in slot DIMM1, the second in slot DIMM2 and the third in slot DIMM3. If the modules use standard SDRAM, the maximum capacity of each module is 128 Mb (wat zo is)

The mainboard supports memory chips that have EC (Eroor Correction) or ECC (Error Correction Code). If you install more than one module, the modules can have different capacities, but the memory chips should all be the same type.

[ Voor 21% gewijzigd door Verwijderd op 09-03-2005 20:07 ]


Verwijderd

Topicstarter
Hmm, dus niemand een oplossing?