Toon posts:

[VPN] Client IP niet goed?

Pagina: 1
Acties:
  • 138 views sinds 30-01-2008
  • Reageer

woensdag 9 maart 2005 08:57

Acties:
  • RSchellhorn
  • Registratie: Augustus 2001
  • Laatst online: 02-05 20:03

RSchellhorn

Topicstarter
Ik zit al veel te lang met het volgende probleem:

Ik heb hier VPN verbinding, waarmee ik naar m'n werk bel. De server is een Windows 2003 Small Business Server, ik heb diverse bestuuringssystemen gebruikt (Win XP, met en zonder SP1 en 2) en Windows 2003 Standaard.

Het netwerk is als volgt
- Werk: ADSL -> Router -> Server, netwerk in subnet 192.168.1.x
- Thuis: ADSL -> Router -> PC, netwerk in subnet 192.168.0.x

Dan nu het probleem:
Mijn PC krijgt van de dhcp server in het router een IP 192.168.0.25, daarmee kan ik inbellen op de VPN. Echter na een tijdje blijft het inbellen hangen op "Verifying username en password" en geeft na 60 sec een fout met "The remote computer did not respond". Als ik dan mijn IP verander in 192.168.0.26 werkt het weer even, maar na een tijdje is het weer mis.....

Naar andere VPN servers gaat het wel goed, dus ik heb het vermoeden dat het probleem aan de server kant ligt. Echter er zijn meer mensen die naar die server VPN-en, die nergens last van hebben.

Wie kan mij helpen ? Ik weet het niet meer.

"Ik heb zo veel soep gegeten, dat kan een mens niet aan. Ik heb zo veel soep gegeten, kan bijna niet meer staan. Ik zat daar maar te slurpen achter die grote kop en als ik bijna klaar was, dan schepten ze weer op!" (Hans Teeuwen)

donderdag 10 maart 2005 10:42

Acties:
  • RSchellhorn
  • Registratie: Augustus 2001
  • Laatst online: 02-05 20:03

RSchellhorn

Topicstarter
Mag ik hem nog een keer onder de aandacht brengen .....

Ik ben ook geholpen met een alternatief of een programma waarmee ik meer inzicht kan krijgen over de VPN verbinding (logging etc).

"Ik heb zo veel soep gegeten, dat kan een mens niet aan. Ik heb zo veel soep gegeten, kan bijna niet meer staan. Ik zat daar maar te slurpen achter die grote kop en als ik bijna klaar was, dan schepten ze weer op!" (Hans Teeuwen)

donderdag 10 maart 2005 11:19

Acties:
  • Appesteijn
  • Registratie: Juni 2001
  • Niet online

Appesteijn

Heb je misschien ook een log-file waarin staat wat er precies mis gaat?

donderdag 10 maart 2005 13:31

Acties:
  • RSchellhorn
  • Registratie: Augustus 2001
  • Laatst online: 02-05 20:03

RSchellhorn

Topicstarter
Heb een "bel sessie" uit het log geknipt, toch nog erg veel tekst :|

code:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257

[204] 13:26:59: RasGetCredentialsW
[204] 13:26:59: RasGetCredentialsW
[204] 13:27:00: RasSetCredentialsW
[204] 13:27:00: RasDialW...
[204] 13:27:00: _RasDial(start)
[204] 13:27:00: looking up subentry 1
[204] 13:27:00: RasCreateConnection...
[204] 13:27:00: RasCreateConnection(0) hrasconn=983040, ConnectionAlreadyPresent=0
[204] 13:27:00: dwIdleDisconnectSeconds=-1
[204] 13:27:00: SaveProjectionResults...
[204] 13:27:00: SaveProjectionResults: saving results (dwSubEntry=0, nbf.dwError=720)
[204] 13:27:00: SaveProjectionResults(0)
[204] 13:27:00: StartAsyncMachine
[204] 13:27:00: starting subentry 1
[204] 13:27:00: SignalDone: pOverlapped=0xa9be474
[204] 13:27:00: RasDialA done(0)
[2620] 13:27:00: WaitForEvent
[2620] 13:27:00: WorkerThread: pOverlapped=0xa9be474
[2620] 13:27:00: WorkerThread: type=2
[2620] 13:27:00: Unblock i=1, h=0xa9be41c
[2620] 13:27:00: NotifyCaller(nt=0x2,su=1,s=0,e=0,xe=0)...
[2620] 13:27:00: NotifyCaller done (dwNotifyResult=1)
[2620] 13:27:00: RASCS_OpenPort
[2620] 13:27:00: DwOpenPort
[2620] 13:27:00: RasGetDeviceName(rdt=8)...
[2620] 13:27:00: RasGetDeviceName. 0x0
[2620] 13:27:00: DwOpenPort: RasPortOpenEx(WAN Miniport (PPTP),0)...
[2620] 13:27:00: DwOpenPort: RasPortOpenEx done(0). Flags=0x2
[2620] 13:27:00: DwOpenPort: PortOpened = VPN4-4
[2620] 13:27:00: DwOpenPort done. 0
[2620] 13:27:00: RasSetPortUserData(dialparamsuid) for 6
[2620] 13:27:00: RasSetPortUserData returned 0
[2620] 13:27:00: EnableAsyncMachine: hport=6, pasyncmachine=0xa9be41c, OvDrop=0xa9be454, OvStateChange=0xa9be474, OvPpp=0xa9be494, OvLast=0xa9be4b4
[2620] 13:27:00: RasSetConnectionParams...
[2620] 13:27:00: RasSetConnectionParams(0)
[2620] 13:27:00: RasAddConnectionPort(vah,1)...
[2620] 13:27:00: RasAddConnectionPort(0)
[2620] 13:27:00: RDM errors=0,0
[2620] 13:27:00: RasDialMachine: SignalDone: prasconncb=0xa9be410
[2620] 13:27:00: SignalDone: pOverlapped=0xa9be474
[2620] 13:27:00: WaitForEvent
[2620] 13:27:00: WorkerThread: pOverlapped=0xa9be474
[2620] 13:27:00: WorkerThread: type=2
[2620] 13:27:00: Unblock i=1, h=0xa9be41c
[2620] 13:27:00: setting rasman state to 1
[2620] 13:27:00: NotifyCaller(nt=0x2,su=1,s=1,e=0,xe=0)...
[204] 13:27:00: RasGetSubEntryHandleW
[2620] 13:27:00: NotifyCaller done (dwNotifyResult=1)
[2620] 13:27:00: RASCS_PortOpened
[2620] 13:27:00: FindNextDevice: (vpn, WAN Miniport (PPTP))
[2620] 13:27:00: RDM errors=0,0
[2620] 13:27:00: RasDialMachine: SignalDone: prasconncb=0xa9be410
[2620] 13:27:00: SignalDone: pOverlapped=0xa9be474
[2620] 13:27:00: WaitForEvent
[2620] 13:27:00: WorkerThread: pOverlapped=0xa9be474
[2620] 13:27:00: WorkerThread: type=2
[2620] 13:27:00: Unblock i=1, h=0xa9be41c
[2620] 13:27:00: setting rasman state to 2
[2620] 13:27:00: NotifyCaller(nt=0x2,su=1,s=2,e=0,xe=0)...
[204] 13:27:00: RasGetConnectStatusW
[204] 13:27:00: SubEntryFromConnection: hrasconn=0xf0000, dwSubEntry=1
[204] 13:27:00: RasGetConnectStatus: read device (vpn,WAN Miniport (PPTP)) from port user data
[204] 13:27:00: RasGetConnectStatus: read phonenumber ###ADR### from port user data
[2620] 13:27:00: NotifyCaller done (dwNotifyResult=1)
[2620] 13:27:00: RASCS_ConnectDevice
[2620] 13:27:00: DwRasGetHostByName returned cAddresses=1 for ###ADR###
[2620] 13:27:00: SetDefaultParams: Using address 0=80.###ADR###
[2620] 13:27:00: RasDeviceSetInfo done(0)
[2620] 13:27:00: SetDeviceParams(rastapi, WAN Miniport (PPTP), 0)
[2620] 13:27:00: RasDeviceConnect(rastapi,WAN Miniport (PPTP))...
[2620] 13:27:00: RasDeviceConnect done(600)
[2620] 13:27:00: RDM errors=600,0
[2620] 13:27:00: WaitForEvent
[2620] 13:27:01: WorkerThread: pOverlapped=0xa9be474
[2620] 13:27:01: WorkerThread: type=2
[2620] 13:27:01: Unblock i=1, h=0xa9be41c
[2620] 13:27:01: RasGetInfo...
[2620] 13:27:01: RasGetInfo done(0)
[2620] 13:27:01: setting rasman state to 3
[2620] 13:27:01: NotifyCaller(nt=0x2,su=1,s=3,e=0,xe=0)...
[2620] 13:27:01: NotifyCaller done (dwNotifyResult=1)
[2620] 13:27:01: RASCS_DeviceConnected
[2620] 13:27:01: SaveVpnStrategyInformation...
[2620] 13:27:01: Saving 2 as the vpn strategy
[2620] 13:27:01: SaveVpnStrategyInformation done
[2620] 13:27:01: RDM errors=0,0
[2620] 13:27:01: RasDialMachine: SignalDone: prasconncb=0xa9be410
[2620] 13:27:01: SignalDone: pOverlapped=0xa9be474
[2620] 13:27:01: WaitForEvent
[2620] 13:27:01: WorkerThread: pOverlapped=0xa9be474
[2620] 13:27:01: WorkerThread: type=2
[2620] 13:27:01: Unblock i=1, h=0xa9be41c
[2620] 13:27:01: setting rasman state to 4
[2620] 13:27:01: NotifyCaller(nt=0x2,su=1,s=4,e=0,xe=0)...
[2620] 13:27:01: NotifyCaller done (dwNotifyResult=1)
[2620] 13:27:01: RASCS_AllDevicesConnected
[2620] 13:27:01: RasPortConnectComplete...
[2620] 13:27:01: RasPortConnectComplete done(0)
[2620] 13:27:01: RDM errors=0,0
[2620] 13:27:01: RasDialMachine: SignalDone: prasconncb=0xa9be410
[2620] 13:27:01: SignalDone: pOverlapped=0xa9be474
[2620] 13:27:01: WaitForEvent
[2620] 13:27:01: WorkerThread: pOverlapped=0xa9be474
[2620] 13:27:01: WorkerThread: type=2
[2620] 13:27:01: Unblock i=1, h=0xa9be41c
[2620] 13:27:01: setting rasman state to 5
[2620] 13:27:01: NotifyCaller(nt=0x2,su=1,s=5,e=0,xe=0)...
[2620] 13:27:01: NotifyCaller done (dwNotifyResult=1)
[2620] 13:27:01: RASCS_Authenticate
[2620] 13:27:01: RasPortSetFramingEx(PPP)...
[2620] 13:27:01: RasPortSetFramingEx done(0)
[2620] 13:27:01: subentry 1 has suspend state 0
[2620] 13:27:01: subentry 1 suspending all other subentries
[2620] 13:27:01: RasPppStart(cfg=8520968)...
[2620] 13:27:01: RasSetRasdialInfo 6...
[2620] 13:27:01: RasSetRasdialInfo 6 done. e = 0
[2620] 13:27:01: RasPppStart done(0)
[2620] 13:27:01: RDM errors=0,0
[2620] 13:27:01: WaitForEvent
[2620] 13:27:03: WorkerThread: pOverlapped=0xa9be494
[2620] 13:27:03: WorkerThread: type=3
[2620] 13:27:03: Unblock i=2, h=0xa9be41c
[2620] 13:27:03: setting rasman state to 6
[2620] 13:27:03: NotifyCaller(nt=0x2,su=1,s=6,e=0,xe=0)...
[2620] 13:27:03: NotifyCaller done (dwNotifyResult=1)
[2620] 13:27:03: RASCS_AuthNotify
[2620] 13:27:03: RasPppGetInfo...
[2620] 13:27:03: RasPppGetInfo done(0), dwMsgId=9
[2620] 13:27:03: RDM errors=0,0
[2620] 13:27:03: WaitForEvent
[2620] 13:27:06: WorkerThread: pOverlapped=0xa9be494
[2620] 13:27:06: WorkerThread: type=3
[2620] 13:27:06: Unblock i=2, h=0xa9be41c
[2620] 13:27:06: setting rasman state to 6
[2620] 13:27:06: NotifyCaller(nt=0x2,su=1,s=6,e=0,xe=0)...
[2620] 13:27:06: NotifyCaller done (dwNotifyResult=1)
[2620] 13:27:06: RASCS_AuthNotify
[2620] 13:27:06: RasPppGetInfo...
[2620] 13:27:06: RasPppGetInfo done(0), dwMsgId=9
[2620] 13:27:06: RDM errors=0,0
[2620] 13:27:06: WaitForEvent
[2620] 13:27:10: WorkerThread: pOverlapped=0xa9be494
[2620] 13:27:10: WorkerThread: type=3
[2620] 13:27:10: Unblock i=2, h=0xa9be41c
[2620] 13:27:10: setting rasman state to 6
[2620] 13:27:10: NotifyCaller(nt=0x2,su=1,s=6,e=0,xe=0)...
[2620] 13:27:10: NotifyCaller done (dwNotifyResult=1)
[2620] 13:27:10: RASCS_AuthNotify
[2620] 13:27:10: RasPppGetInfo...
[2620] 13:27:10: RasPppGetInfo done(0), dwMsgId=9
[2620] 13:27:10: RDM errors=0,0
[2620] 13:27:10: WaitForEvent
[2620] 13:27:14: WorkerThread: pOverlapped=0xa9be494
[2620] 13:27:14: WorkerThread: type=3
[2620] 13:27:14: Unblock i=2, h=0xa9be41c
[2620] 13:27:14: setting rasman state to 6
[2620] 13:27:14: NotifyCaller(nt=0x2,su=1,s=6,e=0,xe=0)...
[2620] 13:27:14: NotifyCaller done (dwNotifyResult=1)
[2620] 13:27:14: RASCS_AuthNotify
[2620] 13:27:14: RasPppGetInfo...
[2620] 13:27:14: RasPppGetInfo done(0), dwMsgId=9
[2620] 13:27:14: RDM errors=0,0
[2620] 13:27:14: WaitForEvent
[2620] 13:27:18: WorkerThread: pOverlapped=0xa9be494
[2620] 13:27:18: WorkerThread: type=3
[2620] 13:27:18: Unblock i=2, h=0xa9be41c
[2620] 13:27:18: setting rasman state to 6
[2620] 13:27:18: NotifyCaller(nt=0x2,su=1,s=6,e=0,xe=0)...
[2620] 13:27:18: NotifyCaller done (dwNotifyResult=1)
[2620] 13:27:18: RASCS_AuthNotify
[2620] 13:27:18: RasPppGetInfo...
[2620] 13:27:18: RasPppGetInfo done(0), dwMsgId=9
[2620] 13:27:18: RDM errors=0,0
[2620] 13:27:18: WaitForEvent
[2620] 13:27:22: WorkerThread: pOverlapped=0xa9be494
[2620] 13:27:22: WorkerThread: type=3
[2620] 13:27:22: Unblock i=2, h=0xa9be41c
[2620] 13:27:22: setting rasman state to 6
[2620] 13:27:22: NotifyCaller(nt=0x2,su=1,s=6,e=0,xe=0)...
[2620] 13:27:22: NotifyCaller done (dwNotifyResult=1)
[2620] 13:27:22: RASCS_AuthNotify
[2620] 13:27:22: RasPppGetInfo...
[2620] 13:27:22: RasPppGetInfo done(0), dwMsgId=9
[2620] 13:27:22: RDM errors=0,0
[2620] 13:27:22: WaitForEvent
[2620] 13:27:26: WorkerThread: pOverlapped=0xa9be494
[2620] 13:27:26: WorkerThread: type=3
[2620] 13:27:26: Unblock i=2, h=0xa9be41c
[2620] 13:27:26: setting rasman state to 6
[2620] 13:27:26: NotifyCaller(nt=0x2,su=1,s=6,e=0,xe=0)...
[2620] 13:27:26: NotifyCaller done (dwNotifyResult=1)
[2620] 13:27:26: RASCS_AuthNotify
[2620] 13:27:26: RasPppGetInfo...
[2620] 13:27:26: RasPppGetInfo done(0), dwMsgId=9
[2620] 13:27:26: RDM errors=0,0
[2620] 13:27:26: WaitForEvent
[2620] 13:27:30: WorkerThread: pOverlapped=0xa9be494
[2620] 13:27:30: WorkerThread: type=3
[2620] 13:27:30: Unblock i=2, h=0xa9be41c
[2620] 13:27:30: setting rasman state to 6
[2620] 13:27:30: NotifyCaller(nt=0x2,su=1,s=6,e=0,xe=0)...
[2620] 13:27:30: NotifyCaller done (dwNotifyResult=1)
[2620] 13:27:30: RASCS_AuthNotify
[2620] 13:27:30: RasPppGetInfo...
[2620] 13:27:30: RasPppGetInfo done(0), dwMsgId=9
[2620] 13:27:30: RDM errors=0,0
[2620] 13:27:30: WaitForEvent
[2620] 13:27:34: WorkerThread: pOverlapped=0xa9be494
[2620] 13:27:34: WorkerThread: type=3
[2620] 13:27:34: Unblock i=2, h=0xa9be41c
[2620] 13:27:34: setting rasman state to 6
[2620] 13:27:34: NotifyCaller(nt=0x2,su=1,s=6,e=0,xe=0)...
[2620] 13:27:34: NotifyCaller done (dwNotifyResult=1)
[2620] 13:27:34: RASCS_AuthNotify
[2620] 13:27:34: RasPppGetInfo...
[2620] 13:27:34: RasPppGetInfo done(0), dwMsgId=9
[2620] 13:27:34: RDM errors=0,0
[2620] 13:27:34: WaitForEvent
[2620] 13:27:38: WorkerThread: pOverlapped=0xa9be454
[2620] 13:27:38: WorkerThread: type=1
[2620] 13:27:38: Unblock i=0, h=0xa9be41c
[2620] 13:27:38: Link dropped!
[2620] 13:27:38: RasGetInfo...
[2620] 13:27:38: RasGetInfo done(618)
[2620] 13:27:38: Port was close because of 721
[2620] 13:27:38: setting rasman state to 8193
[2620] 13:27:38: NotifyCaller(nt=0x2,su=1,s=8193,e=721,xe=0)...
[2620] 13:27:38: NotifyCaller done (dwNotifyResult=0)
[2620] 13:27:38: Discontinuing callbacks for hrasconn 0xf0000
[2620] 13:27:38: Cleared notifier for hrasconn 0xf0000 subentry 1
[2620] 13:27:38: Quitting s=8193,e=721
[2620] 13:27:38: Asyncmachine: Cleaning up
[2620] 13:27:38: RasDialCleanup...
[2620] 13:27:38: CleanUpRasconncbNode
[2620] 13:27:38: StopAsyncMachine
[2620] 13:27:38: (CU) RasPppStop...
[2620] 13:27:38: (CU) RasPppStop done
[2620] 13:27:38: DeleteRasconncbNodeCommon: prasconncb=0xa9be410
[2620] 13:27:38: CloseAsyncMachine
[2620] 13:27:38: CleanUpRasconncbNode done
[2620] 13:27:38: RasDialCleanUp done.
[2620] 13:27:38: WaitForEvent
[2620] 13:27:38: WorkerThread: pOverlapped=0xa9be4b4
[2620] 13:27:38: WorkerThread: type=4
[2620] 13:27:38: asyncmachine=0xa9be41c: last event for hport=6
[2620] 13:27:38: RasDialFinalCleanup: deallocating prasconncb=0xa9be410
[2620] 13:27:38: FinalCleanUpRasconncbNode: deallocating prasconncb=0xa9be410
[2620] 13:27:38: FinalCleanUpRasconncbNode: 0 nodes remaining
[2620] 13:27:38: SignalShutdown: pOverlapped=0x76ec6d60
[2620] 13:27:38: WorkerThread: pOverlapped=0x76ec6d60
[2620] 13:27:38: WorkerThread: type=5
[2620] 13:27:38: WaitForEvent: OVTEVT_DIAL_SHUTDOWN event received
[2620] 13:27:38: AsyncMachineWorker terminating
[204] 13:27:38: RasHangUpW
[204] 13:27:41: RasGetAutodialEnableW
[204] 13:27:41: RasGetAutodialParamW
[204] 13:27:41: RasGetAutodialParamW


###ADR### klopt, bijbehorend IP ook.

"Ik heb zo veel soep gegeten, dat kan een mens niet aan. Ik heb zo veel soep gegeten, kan bijna niet meer staan. Ik zat daar maar te slurpen achter die grote kop en als ik bijna klaar was, dan schepten ze weer op!" (Hans Teeuwen)

donderdag 10 maart 2005 13:42

Acties:
  • Appesteijn
  • Registratie: Juni 2001
  • Niet online

Appesteijn

Heb je de juiste poorten geforward/opengezet naar je client? Als het over het veranderen van je IP-adres hebt en 'dan lukt het wel even', bedoel je dan dat je dan wel verbinding krijgt met het VPN? Dus dan worden je username/pass wel geaccept?

In de logfile staat: Port was close because of 721
Probeer anders een hierop te zoeken bij google en dat het merk VPN-software erbij.

donderdag 10 maart 2005 13:50

Acties:
  • RSchellhorn
  • Registratie: Augustus 2001
  • Laatst online: 02-05 20:03

RSchellhorn

Topicstarter
Voor VPN clients hoeven toch geen poorten geforward te worden in een router, dat is alleen voor de server. De software die gebruikt wordt is de RAS service van Windows 2003 SBS en op de client de standaard spullen van Windows.

Port was close because of 721
Error 721 is dus "The Remote Computer Did Not Respond"

Als ik nu mijn IP (client computer) naar 192.168.0.28 (was 192.168.0.27) zet, kan ik 1 keer bellen, daarna weer precies het zelfde probleem. Dus gebruikersnaam, ww en alle adressen zijn goed...... lijkt mij dan :?

[ Voor 4% gewijzigd door RSchellhorn op 10-03-2005 13:51 ]

"Ik heb zo veel soep gegeten, dat kan een mens niet aan. Ik heb zo veel soep gegeten, kan bijna niet meer staan. Ik zat daar maar te slurpen achter die grote kop en als ik bijna klaar was, dan schepten ze weer op!" (Hans Teeuwen)

vrijdag 11 maart 2005 15:03

Acties:
  • Appesteijn
  • Registratie: Juni 2001
  • Niet online

Appesteijn

Aangezien je client zegt dat je server niet respond zou dit misschien toch aan je router kunnen liggen. Probeer anders eens voor de zekerheid poort 1723 te forwarden naar je client en als het kan protocol 47 (GRE) open te zetten. Dan kan je dat in ieder geval uit te sluiten.
Pagina: 1
Reageer