[Fedora] Triplehead Ati setup

[cosmoOo]

Ik wil linux op de desktop is gaan proberen en ben nu bezig mijn triplehead setup werkend te krijgen.

systeem
AGP ATI Radeon 9500 Pro, 2x CRT
PCI ATI Radeon 9000, 1x CRT
Nieuwste ATI drivers 8.10.19
Fedora FC3, clean install

Ik heb dualhead op de AGP kaart werkend, en singlehead op de PCI kaart afzonderlijk. na het samenvoegen van de xorg.conf files werkt mijn dual head setup gewoon maar het derde scherm krijg ik nog niet aan.

de log

(--) PCI: (1:5:0) ATI Technologies Inc Radeon R300 ND [Radeon 9700 Pro] rev 0, Mem @ 0xe0000000/27, 0xfc000000/16, I/O @ 0xc000/8
(--) PCI: (1:5:1) ATI Technologies Inc Radeon R300 [Radeon 9700 Pro] (Secondary) rev 0, Mem @ 0xe8000000/27, 0xfc010000/16
(--) PCI:*(2:6:0) ATI Technologies Inc Radeon RV250 If [Radeon 9000] rev 1, Mem @ 0xf0000000/27, 0xfa200000/16, I/O @ 0xd000/8
...
(II) Primary Device is: PCI 02:06:0
(WW) fglrx: No matching Device section for instance (BusID PCI:1:5:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:2:6:0) found
(--) Chipset RADEON 9700 PRO (R300 4E44) found
(--) Chipset RADEON 9700 PRO (R300 4E44) found
(--) Chipset RADEON 9000/9000 PRO (RV250 4966) found
...
(II) fglrx(0): pEnt->device->identifier=0x846d888
(II) fglrx(1): pEnt->device->identifier=0x846d888
...
(II) fglrx(2): pEnt->device->identifier=0x20
(EE) Screen 2 deleted because of no matching config section.
(II) UnloadModule: "fglrx"

PCI 1.5.0 AGP kaart
PCI 1.5.1 AGP kaart
PCI 2.6.0 PCI kaart

de melding dat hij 1.5.1 niet vind klopt omdat dit niet in mijn config file staat maar alle twee de uitgangen van de AGP kaart werken nu ook.
2.6.0 staat gewoon in de config file, dus ik snap nog niet waarom hij deze niet vindt.

(II) fglrx(2): pEnt->device->identifier=0x20
(EE) Screen 2 deleted because of no matching config section.
(II) UnloadModule: "fglrx"

Het is logisch dat ik op het derde scherm niks zie en die 0x20 ziet er niet echt goed uit,

mijn config file

Section "Device"
Identifier "ATI Graphics Adapter connector 0"
Driver "fglrx"
Option "no_accel" "no"
Option "no_dri" "no"
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "CRT, CRT"
Option "IgnoreEDID" "off"
Option "HSync2" "31.5-94"
Option "VRefresh2" "50-90"
Option "ScreenOverlap" "0"
....
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:1:5:0" # vendor=1002, device=4e44
Screen 0
EndSection

Section "Device"
Identifier "ATI Graphics Adapter connector 1"
Driver "fglrx"
BusID "PCI:1:5:0" # vendor=1002, device=4e44
Screen 1
EndSection

Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
Option "no_accel" "no"
Option "no_dri" "yes"
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
Option "UseFastTLS" "2"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
Option "KernelModuleParm" "agplock=0" # AGP locked user pages: disabled
BusID "PCI:2:6:0" # vendor=1002, device=4966
Screen 2
EndSection

Ik kan maar weinig info vinden over opstellingen met meer dan 1 videokaart. dus ik hoop dat hier iemand is die hier handig in is.